Good video excited to see you expanding on these new functions 👍
@CamInstructor3 жыл бұрын
More to come!
@gillisdebilio45163 жыл бұрын
Great, I will be watching for your new videos. Thanks
@CamInstructor3 жыл бұрын
Awesome, thank you!
@columbic3083 жыл бұрын
mastercam is the best ever
@CamInstructor3 жыл бұрын
'Best there is, best there was, best there ever will be' .....sorry, stole that from Brett 'The Hitman' Hart! :)
@SuperAWaC3 жыл бұрын
I'd like to see more advanced surfacing and multiaxis stuff. For multiaxis, maybe do a collab with ron to make an advanced 5 axis course you offer online? I'd buy it.
@ipadize3 жыл бұрын
afaict there is still room for improvement oon smaller things, which will makke programming definitely easier. More optioons in the Tool definition for example the helical angle when entering pockkets as well as spindle speeds and feeds or recognizing and milling flats in 3d adaptive or in horizontal to be able to start from the outside instead of always helical entering every flat suurface (which is in my opinion stupid becauuse it costs time and the surface finish will be compromised). sorry for misspelling, my kkeyboard sometimes writes letters twice
@CamInstructor3 жыл бұрын
On parts where Horizontal Area is not doing what I like, I usually end up using a 2D option like Pocket or Area Mill. The software is improving every year and user suggestions are taken into consideration. Drop Mastercam a line and have your suggestions heard.
@ipadize3 жыл бұрын
@@CamInstructor yes i have already done that :)
@rasedkhanrasedkhan52963 жыл бұрын
Very good tutorial
@CamInstructor3 жыл бұрын
Glad you liked it
@AchmadiTutorialmastercam2 жыл бұрын
I teach mastercam at a vocational school and still use mastercam X5, is there any mastercam 2022 software for free education?
@CamInstructor2 жыл бұрын
Send us an email and we can discuss the options for schools. Someone will be able to point you in the correct direction and give better info than I can. customer.service@caminstructor.com
@9955CAM82 жыл бұрын
it's wonderful
@CamInstructor2 жыл бұрын
Thanks!
@chanderjangra38803 жыл бұрын
On you tube there is no video about WCS how to set and verify can you please explain this topic please 😭😭😭🙏🙏🙏🙏
@policebox10923 жыл бұрын
Good
@CamInstructor3 жыл бұрын
Thanks
@rmorr013 жыл бұрын
Ugly = Mastercam's Post Processor Editing! 👍
@CamInstructor3 жыл бұрын
I leave that to the experts at Postability! ...ha, just a little plug for those hard working post editors over there!
@mohamedabousalah98983 жыл бұрын
hello and thank you mastercam 2022 demo HLE is free or needed licence
@trademarkcr77903 жыл бұрын
The HLE version should be free to download.
@CamInstructor3 жыл бұрын
It will be free but I hear there will be a licensing step this time. Not sure how that works as of yet, waiting on more info.
@columbic3083 жыл бұрын
hi, is there a course about editing post processors and control definitions. I bought a mcam lathe course but there is no videos about pst files or control files
@CamInstructor3 жыл бұрын
There are courses out there but we do not offer any on post editing or creation.
@tonygombas4912 жыл бұрын
Need help I just up loaded the 2022 home version had it for a couple of days now it won’t open when I click once and when I double click I have 3 or 4 pages at the same time and then I shuts down what the f$&k can I do thanks
@CamInstructor2 жыл бұрын
I would contact your local reseller for tech support or even contact Mastercam directly techsupport@mastercam.com
@tonygombas4912 жыл бұрын
@@CamInstructor thank you for your help
@voanvan86683 жыл бұрын
how to add-in Art tab in Mastercam 2022 ?
@CamInstructor3 жыл бұрын
It was part of the Beta install. I'll cover more on this once the main release and HLE releases are available.
@voanvan86683 жыл бұрын
I'm using mastercam 2021, Can you give me the installation file Art tab for Mastercam 2021 ? Thanks you !
@hillfortherstudios27573 жыл бұрын
Ugly: exponentially more expensive than Fusion.
@CamInstructor3 жыл бұрын
Mastercam also costs more than a loaf of bread. If a loaf of bread helps you through your work day better, buy the bread. Most shops find that Mastercam helps them get through their day better so they buy it instead.
@hillfortherstudios27573 жыл бұрын
@@CamInstructor where did you get the info that "most shops" have it?
@CamInstructor3 жыл бұрын
www.dailycadcam.com/cimdata-ranks-mastercam-1-in-worldwide-nc-programming-installed-seats-over-274k/ The image and data linked is compiled by an independent company called CIMDATA.
@hillfortherstudios27573 жыл бұрын
@@CamInstructor I was quoted as $15000 with $1500 per year to get an update and I would've had to pay for a custom post-processor. Not happening. If you want to make more profit, use a better and cheaper program IMO.
@CamInstructor3 жыл бұрын
I'm not trying to convince you to buy or use Mastercam. There are reasons Mastercam costs what it does and reasons Fusion costs what it does.
@saoyuer11 ай бұрын
it's look like so hard 😪
@performz282 жыл бұрын
They never fixed the glitch in the tree branch: folders/parameters won't open (often times) unless you clicked at another folder above it, this glitch it's been there since the x series. Pcs & graphics cards are not the problem. Another glitch: my circles, radiuses get chopped-off when editing the toolpath (often times aswell), the toolpath becomes dirty & needs regeneration & creation for the missing section of the wireframe. Mastercam is too overrated. I've used FeatureCam in the past & never encounter glitches like mastercams'. Mastercam feels like if your driving a brand new vehicle with engine problems. I've been a Mastercam user since 2010 due to popularity in the job-market, otherwise I would've chosen a different Cam software. Ps: The certification they offer is a Joke. They lost my certification awards/data from 2012. They never reply when I contacted them. Shame on CNC Software.
@CamInstructor2 жыл бұрын
I haven't experienced any of the problems you mention. Would be best if you took those issues to CNC Software. If they are able to reproduce the issue then they can most likely fix it. Certification, guess you should have taken ours instead :)
@performz282 жыл бұрын
@@CamInstructor I appreciate your reply. I've learned that the only thing that really matters to CNC software is $$/sales. I never hear from them if issues popup. Mastercam feels ancient compare to similar software. If you can't beat them then join them, lol, so here I am complimenting their crashy/glitchy/jumbled-up/popular product. For me: No more waisting money on certifications related to Mastercam. I paid around $ 830.00 total including their practical/professional test & now those certification awards are no where to be found... so, no thanks.
@hameddesign70 Жыл бұрын
Hi , im pllanning to learn mastercam at age of 30 , i have worked with other cadcam solutions and faced their limitations and i want to choose the best , but my questions are what are the limitations of mastercam in terms of toolpath creation and performance ? i do have researched alot thru youtube , google , any possible sources , honestly mastercam doesn't have any problem in terms of toolpath creation , ( i'm planning to use mastercam for 4 axis and 3 axis wood working ) but there is one thing that i noticed is performance issues m currently im trying to push mastercam to it's limitation , cause in woodworking industry time is gold and using one simple raster to create a wooden column is no good , creating a gcode with stacking 300 or more operations on top of each other will reduce machining time to less than 1/5 (modeling in surfaces ) but the problem is cad cam software are stable with one or two operation m but when it comes to multiple operations they will collapse and continue working will be impossible . i reached my hands on mastercam at one of my friends workshops i tried out some of the toolpath commands ( I want to just select some surfaces and create offset toolpath thats it) after a quiet wrestling with software i find out "Unified multiaxis" is what i want , but there was a thing , after stacking up 200 operations the pc starts to freeze up and act laggy like others. 1. am i doing it right ? is unified multiaxis any good for 4 axis toolpath generation ? or is there any specific toolpath or what i want ? (also the size of saved file drastically increase because of gauge geometry ??) 2. is mastercam capable of handling 300 more toolpaths stacking on top of each other ? 3. is it possible to suppress or disable previous toolpaths to make it possible to continue working ? ( cause im suspicious that mastercam is calculationg toolpath links live ) 4. another problem that i had (not a problem ) but framerate for an imported ~100mb solid igs was terrible for a 1070 ti asus rog gpu idk if any requested softwares like drivers or directx was needed or installed there but what i want to know if this is normal or not ? mastercam was working very fine with lighter models but as the models started to getting heavier mastercam struggles to handling the model 4.5 . is there any prefered strategy in mastercam to let the software to be able to run alot of gcodes? 5.what is the best hardware spec (and also medium) to run mastercam ?
@CamInstructor Жыл бұрын
1-Unified is becoming the go to multiaxis toolpath, so with no other information I would suggest starting there. 2-Mastercam can do 300 or more toolpaths. This is more about your computers capability at this point. 3-You can lock toolpaths, but should need to. Mastecam will not 'recalculate' a toolpath unless you break something within it. 4-IGS are not great models. Basically, anything else would be preferred. If you can get a parasolid, that would be my first choice. 4.5-You don't need to do things a certain way. The software will function as long as your computer can handle it. 5-Get the best i9 in your budget, max ram 64 or more, high end Quadro video card RTX A4000 or better, latest gen PCIe SSD. Desktop will perform better than a laptop.