No video
Mastering Bag Making: Easy No-Twist Strap - Full Tutorial
Рет қаралды 6,695
Күн бұрынWelcome to Mastering Bag Making, where we talk about making the No-Twist Strap. Enjoy!
1" Strap Ends: www.emporiumthreads.com/colle...
Fancy Pen:
hannawoodworking.com/collecti...
A note: I incorrectly mentioned the song Roll Over Beethoven was “by The Beetles”. However, it was originally written and performed by Chuck Berry and released in 1956. It was later covered by other acts. Crediting the original artist is important and I wanted to correct my error.
Chapters
Intro - 0:00
Today's Video - 0:24
Materials & Setup - 1:25
Prepare Strap Material - 6:09
Sewing your strap - 16:38
Install Strap Ends - 22:05
Outro - 25:30
Join our Facebook Group!
/ emporiumthreaders
@vernahughes4281 2 жыл бұрын
OH MY GOSH! I just tried a sample and am hooked. Since I did not have the metal ends, I turned down the end 1/4 inch, sewed beautifully. I've got an order for a bag this week and will be using your method.
@EmporiumThreads 2 жыл бұрын
Yay! So glad it was useful for you, make sure to post your bag in the Facebook group so we can see how it came out!
@baharcahobi 2 жыл бұрын
Paylaşım için teşekkürler.
@SewYours 2 жыл бұрын
I’ll have to give this a try, thanks!
@EmporiumThreads 2 жыл бұрын
You're welcome! Thanks for watching, and let us know in the Facebook group how you get on with it!
@jenpatterson8309 2 жыл бұрын
Thank you for the great tutorial I have a Juki TL 18 and sometimes struggle top stitching I want to close my eyes and hold my breath lol definitely going to use your technique
@EmporiumThreads 2 жыл бұрын
You're welcome, give a try, you can do it!
@angelar1500 2 жыл бұрын
Great tutorial! I'm wondering if the tiny screws ever come out and would a dab of glue before actually screwing them in solves that? Have yet to try the metal ends but they look very professional.
@EmporiumThreads 2 жыл бұрын
Thank you! I haven’t had a problem with the screws coming out but it is possible. If you’re worried about it a dab of E6000 or super glue should solve it, just don’t use too much.
@Craftbags33 2 жыл бұрын
Wow can’t wait to try this is game changer! Which industrial machine is that ? Thank you for the video
@EmporiumThreads 2 жыл бұрын
You're welcome, thanks for watching! The industrial machine I have is a Siruba DL7200-BH1-16, which I got from a local dealer.
@tinahale5369 2 жыл бұрын
Can I use this method for shoulder straps?
@EmporiumThreads 2 жыл бұрын
Sure! I use this method for all straps I make, be it shoulder straps for a tote or an adjustable strap for a crossbody bag. If it’s made using vinyl, I use this method. Happy sewing!
@tinahale5369 2 жыл бұрын
@@EmporiumThreads Thank you.
@kathyversnel8791 5 ай бұрын
Can I do the ends with rivets
@EmporiumThreads 5 ай бұрын
Im not sure I understand the question. If you can help me understand, I can give you my opinion of additional help if able :)
@sugarmuffin57 2 жыл бұрын
Did you cut the vinyl on the straight of grain?
@EmporiumThreads 2 жыл бұрын
Hello! The strap in the tutorial is not cut with the grain, but if you do it shouldn't cause a problem. It's not required to cut along the grain for this method.
@jackieheaney6864 2 жыл бұрын
Does this work the same for fabric??
@EmporiumThreads 2 жыл бұрын
Hi, thanks for watching! I've only used this method for vinyl straps, so I'm afraid I can't say whether or not it would work for a fabric strap. I think the twist issue this method is designed to solve is primarily an issue with vinyl straps, so my guess is there are probably other methods better suited for a fabric strap.
@jackieheaney6864 2 жыл бұрын
I tried this with fabric and i got the flattest straps i have ever got!!!
@EmporiumThreads 2 жыл бұрын
Well dang there you go! Glad to hear it worked well for you and I'll keep that in mind for fabric straps!
@4golfing Жыл бұрын
COULD YOU ELABORATE? DID YOU DO SOMETHING ABOUT THE FRAYING?
Sewly Jo
Рет қаралды 27 М.
Deb Jameson - Me Made Makes
Рет қаралды 3,4 М.
Jess OklaRoots
Рет қаралды 20 М.