Concrete Foundation - Spread Footings, Point Loads, Plumbers In + Out #3

Рет қаралды 95,754

3 жыл бұрын

We're getting started on a 3,000SF farmhouse duplex, on a lot that is going to make the building process much more difficult. With overhead powerlines, a foundation that sits a whopping 12" away from a block wall, we've got our work cut out for us.
Tool List: www.amazon.com/shop/mattbangs...
Connect with me:
_________________
Instagram: / mattbangswood
KZfaq: / mattpanella
FaceBook: / mattbangswood
Hammr: www.hammr.com/matt
Sponsors:
__________
Ariat 10%: ariat.dkkdet.net/c/2029241/69...
Diamondback Toolbelts: www.toolbelts.com/
BAD Workwear: www.badworkwear.com/
(CODE: "MBW10")
#construction #building #carpentry

Пікірлер: 259

@thetallcarpenter 3 жыл бұрын

Fascinating to see how these type of foundations are done in different countries. Using timber to build houses causes completely different load characteristics on a footing than using block/brick. Thanks for the video. 👍

@gr8grandfrog874 3 жыл бұрын

Thank God these videos exist I just started framing and I used to do concrete so it's cool to learn a lot about each thing

@lennyadamowicz7642 3 жыл бұрын

It’s great listening to you man! You come so far so fast! Keep on Learning & I see a great future for you! Stay safe!👌👍🏻

@PullingThreeds 3 жыл бұрын

I’m a CM major, your videos always help me visualize and see what I’m learning and class and are super helpful for me. Keep doing what you’re doing!!

@mikelee6894 3 жыл бұрын

i'm loving this build series!!! that was a really good explanation of a spread footing with plan snap shots at the end of the video.

@saheadsahead 3 жыл бұрын

I loving that you are explaining everything,

@williamdecamp7343 Жыл бұрын

Enjoy watching a builder that knows what he’s doing and takes the time to share with viewers. Awesome job

@dabruscar 3 жыл бұрын

Good seeing you back in action buddy. Stay safe.

@Mantikoha 3 жыл бұрын

happy to see a new build. greetings from Berlin. Keep up the great work, video and carpentry!

@pachecolljk 3 жыл бұрын

You're a great speaker, and these videos are interesting as hell! Thanks for the info, bro!

@josephwolfinger7916 3 жыл бұрын

I like your channel looks like y’all know what your doing, keep up the good work.

@brownclorox 3 жыл бұрын

I'm hooked. Excited for the next video already!

@davidchristian2071 3 жыл бұрын

GREAT VIDEO Matt.....excellent work 👏 👍 👌

@modularliving1024 3 жыл бұрын

Excited 🙌🏼

@ksoman953 3 жыл бұрын

Good detailed videos. Good luck on the build.

@Andrewnewman11 3 жыл бұрын

Good stuff man! Coming together nicely! 🤘😁🤘

@michaelvelez8480 3 жыл бұрын

Thanks I’m a superintendent for Lennar construction I love your videos keep up the hard work

@tmenzella 3 жыл бұрын

Hey man. Gotta say, your building work is awesome and the way you explain stuff if very easily understood. Wished we used more timber frame in the UK. All the best 👌🏻

@tmenzella 2 жыл бұрын

@Inspector Oznola brick and block mainly.

@pbenga 3 жыл бұрын

It's a complete mess at ground level, but when you see the drone shot, it's pure beauty.

@RoundFender110 3 жыл бұрын

Can’t wait to see the finished product

@jbll36 3 жыл бұрын

Hello Matt. A lot of work goes in the ground before the concrete is poured. Very cold here in southern Maine today. 50mph winds bringing the temp down to -20° . COLD burr. Enjoy the day. Ray L

@larryestrada5418 3 жыл бұрын

Good stuff to the very end.

@Brady.Oliver_Dad 3 жыл бұрын

In Colorado 30% across the board. Rough framing materials is about $25 a sq ft and additional $4 to get through the roof on a typical build. But we have 1st level floor systems not slab on grade. Bang On!!!👊

@henryvargas2915 3 жыл бұрын

Nice job brother I’m a CEMENTERO from Los Angeles looking good bro

@antoniov4152 3 жыл бұрын

great videos love you're work keep it up brother. 🚀

@saulmoreno3252 3 жыл бұрын

Just moved on to battery powered makita... world of a difference. Especially during trusses and out lookers

@anthonylandestoy9004 3 жыл бұрын

Just started the video but I like the Subtle GME reference you put in the intro

@stevek5363 3 жыл бұрын

Patiently awaiting part 4

@BenKlassen1 2 жыл бұрын

Great information presented well. Subscribed.

@andrewcarr2431 3 жыл бұрын

here in Eastern Canada metal studs are the being used for many reno's (Basement etc) as they are costing the same as a 2x4 "used" to be. I just did a house build and the lumber costs were about 50% higher than the previous year.

@josueredondo3764 3 жыл бұрын

excellent work

@abike3969 Жыл бұрын

Good stuff enjoying

@arbinnunez109 3 жыл бұрын

Very talented young man building america thank you

@galluprenovations8397 3 жыл бұрын

Love the instrumental

@leongrows3352 3 жыл бұрын

11:44 peekaboo lol! Great video bro im always learning from you!

@tylerfreund4777 3 жыл бұрын

I love construction so how I explain it is is I like how they build buildings and they work on stuff and I get everything good and ready to go

@austindantonio5091 Жыл бұрын

Have been using a 6" piece for footings by itself always dropping it, will definitely be adding 9" piece to top from now on.

@IRONHORSEhomes 3 жыл бұрын

Good stuff Boss

@johng4024 3 жыл бұрын

Great videooo

@Bill_N_ATX 3 жыл бұрын

God do I enjoy living out in the country in Texas. When I built a new place I went to the County, paid them $250 bucks for the permit, and that was it. No inspections, no restrictions, no insane rules. They just told me good luck and enjoy my new home. They came out after it was done to see what I built and decided how much my property taxes went up. I did have to have the septic system approved and inspected by that’s a state mandated program. I already had a well and electricity on the property. Easy as that.

@MattBangsWood 3 жыл бұрын

That's why I'm moving to Oregon!

@franciscoestrada7429 3 жыл бұрын

I am in Oregon. Sometimes I feel like I am in the wrong state to one, run a small business , construction. and the other because of the dang taxes here lately 🤦

@franciscoestrada7429 3 жыл бұрын

@@MattBangsWood hey Brother been watching your videos. Pretty awesome to see another young buck who actually swings a hammer and gets it done!! I live in Salem Oregon, operate a 6 man foundation framing crew. It’s beautiful here brother but regs here are similar to Cali in regards to building. Little more lax depending on your inspector and if your setup is good but I think you’ll do great out here!! Let me know if you need anything when you come up, always willing to help if possible. FTW!!

@barrym266 3 жыл бұрын

@@MattBangsWood I'm in Washington, have build plans in hand, just got permit last week. If you were close i'd hire you to build it.

@travisandtracyjacobs6198 3 жыл бұрын

@@franciscoestrada7429 Keizer Oregon here.

@felipejose9909 3 жыл бұрын

I think I learn more on your videos than I did in schools.

@every_thing_wood1251 3 жыл бұрын

Yes sir. All day

@maxn5625 3 жыл бұрын

Should sub grade it first then dig the size footing, that way you don’t have to use to much form, only form the outside perimeter, easier to put all your footing rebar. Finally put in your 6” base, then pour the footing and slabs same time 👍

@lwjones56 3 жыл бұрын

February 2020 I was paying $16.95/sheet for 7/16” Zip System, currently the same store it’s $45.85 per sheet. SPF framing lumber is double. NE Florida.

@tarnjotcanucks 3 жыл бұрын

I work at a lumber mill up in BC Canada, prices have gone up to 70% from what I'm hearing

@everardojaime4008 3 жыл бұрын

from March 2020 to March 2021 prices have gone up more than 74% in the US

@justsomeawesomeperson6396 3 жыл бұрын

Lumber prices are crazy here in the Netherlands too. We’re lucky that our lumber supplier takes good care of us since we’ve always gotten all our lumber there. But shit. Some folks can’t even get lumber. And that sucks for everyone...

@rainbirdhunter4002 3 жыл бұрын

Great master

@MrTheBurkes 3 жыл бұрын

Oh yeah, been looking forward to another video! 👍🏻👍🏻👍🏻

@RoundFender110 3 жыл бұрын

Same

@shannonelam6766 3 жыл бұрын

In my area of south Texas we’re seeing an average of 25% to 30% increase in material cost, and in some cases more than 40% increases depending on types or materials! There’s not much if any discounts in material cost these days and you can bet these prices will remain high, and even get higher with the restricted energy industry, etc.

@FIN4L_BOSS 3 жыл бұрын

Matt you should look into getting the cordless duplex framing gun from metabo hpt for your form work

@uctt24 3 жыл бұрын

With the demand for new homes and custom homes I could easily see the price go up 15-30% depending on area.

@e.wiggins 3 жыл бұрын

As a former lumber salesman the prices have been ridiculous. 1500sqft home frame was 60k had increases go as high as 95k. Extreme cases were doubled

@marcosmota1094 3 жыл бұрын

15:29 The neighbors power service needs to be reconnected and gotten out of the way. Can't have power lines reachable from roof or windows.

@jagslion3 3 жыл бұрын

Lumber prices inched over $1,000 per 1,000 board feet, according to Random Length Lumber Futures for March. That’s double the price from just three months ago.

@macondugard7428 3 жыл бұрын

Bravo 🎊🎉🍾

@rjdestiny-mx4ir 2 жыл бұрын

Idk about every plumber but the ones where I'm at don't ever bother trying to look out for framing when they are doing their underground work. All of the issues that you mentioned other than the tie down location would have been other trade issues. But I get what you mean. You found a problem. Might as well have it fixed now before it's a pain in the ass later after the footings are poured. I try to do the same if I catch something when I come into work after other trades

@redneckgoatfarmer 3 жыл бұрын

I’m building my house... prices have jumped by 100%. Because of material increase, stuff I was going to sub out I have decided to do myself.

@T.E.P. 3 жыл бұрын

yesssss

@paulgeorge150 3 жыл бұрын

Matt is the terminology for a sheer wall is it a load bearing wall, lumber prices probably about 60%

@zmanmd1641 3 жыл бұрын

Those power lines are going to make pouring concrete interesting to say the least. Do you plan to use a pumper truck and boom?

@borys444 3 жыл бұрын

I would say a 30% increase and how much more weight can a point load take on versus the rest of the house which is considered to b a non point load? What factors go behind dictating a point load? Dude love the videos am seeing this stuff really for the first time. Cheers!

@timl.1324 3 жыл бұрын

Probably a 30-35% increase for lumber. We’re seeing 35-40% higher in CO

@dakota6877 3 жыл бұрын

I was Gunna ask about the hammer then boom spilt in half I’ll pass I think😂

@ryanleadbetter593 3 жыл бұрын

Ssshhhooow... 4 G's for the win!

@MattBangsWood 3 жыл бұрын

😁😁😁

@MattBangsWood 3 жыл бұрын

Material cost increase on this project.. +$10,000.00 in 2 months (+25%)

@mrhortimer1 3 жыл бұрын

Same in Germany dude. I usually pay about 400€/m3 of construction lumber. I'll likely have to pay about 30-40% more starting may/ June. That's why I start every bid I write, off with "material prices are according to the time of this bid, the price can rise in the coming months or during the time of construction and is thereby subject to change"

@congamer6603 3 жыл бұрын

Lumber up 30% in canada 😫

@Bill_N_ATX 3 жыл бұрын

I work in a computer based industry. Not only have prices increased, some parts are simply not available for love nor money. Just not available. Starting to impact projects hard. Customers who thought things were going to be ready by June or July are getting told we don’t know when we will be able to fully complete their projects. Ouch.

@damiangarcia786 3 жыл бұрын

Hey matt ive talked to some people up high where i build in MD. They said until next year keep paying more and more. Unless we buy large packages like around $120k-$150k worth of material then we can get a drastic discount almost back to regular prices. But we would have to store and inventory them.

@charlieshwan5574 3 жыл бұрын

Who pays the increase?

@marinefoxalpha4499 3 жыл бұрын

up here in TX we have seen like 40% with 70% on sheet

@PaulMorgan1 3 жыл бұрын

Didn't realize Adam Driver is building footings now :D

@MattBangsWood 3 жыл бұрын

HAHAHA

@kathypritchard2188 3 жыл бұрын

Matt I'd love to work for you guys I'm 63 old dude to learn from you guys for free I've owned a family furniture refinishing company for 70 yrs well we've been in business that long I've been doing it 42 years would definitely like to learn from a real pro

@hggarcia60 3 жыл бұрын

From January to now it when in Florida 35% up gas is going up so I guess everything is gonna go up now except salary

@michaelvangundy226 3 жыл бұрын

I don't know about your region but a flammable pipe in a party wall? The base of stack cleanouts? I personally would pipe it differently but ten plumbers do 12 things.

@robwalker8530 3 жыл бұрын

In my neck of the woods, commodity OSB went from under $10 a sheet to over $30 a sheet. That’s 300%.

@jdiet-z4734 3 жыл бұрын

Um, you mean 200%

@travisandtracyjacobs6198 3 жыл бұрын

@@jdiet-z4734 Lol.

@xblast10 3 жыл бұрын

Love the videos. Wish you were in Southern California so you can bid on my home addition

@MattBangsWood 3 жыл бұрын

How far SoCal?

@xblast10 3 жыл бұрын

@@MattBangsWood Pasadena/Arcadia area (SGV). I got my plans approved and pulled the building permit already. Looking for quotes.

@MattBangsWood 3 жыл бұрын

How far out are you on framing? If it's a decent build I'd consider bidding.

@xblast10 3 жыл бұрын

@@MattBangsWood what's your email address? I can send you my plans. I havent started any work. Will need foundation work too.

@ethanwalker1222 3 жыл бұрын

How did you learn how to build all of the buildings? Did you go to school for it?

@jeremyhuggins8796 3 жыл бұрын

Are you going to explain what you were installing @ 9:28 in this video, in episode 4?

@marcosmota1094 3 жыл бұрын

What schedule are you using on the PVC? Can you use HDPE instead?

@timmarmontelo3256 3 жыл бұрын

This seeems like a lot more work than what I’m used to seeing But looking good

@MattBangsWood 3 жыл бұрын

The whole inner form is unnecessary if pouring in a single shot, but we're pouring this in 2 pours, so it's needed here.

@ianmyers1593 3 жыл бұрын

With the price of lumber going up would form panels be a cheaper option?

@MrTrapichero 3 жыл бұрын

Those screws You put with the metal bracket. the code allows you to weld to the rod ?

@MattBangsWood 3 жыл бұрын

No, I'll show those being utilized later on. The strong wall system only needs 2-1/8" sticking up from stem wall to be utilized.

@george36 3 жыл бұрын

Bill 42% increased from december till now. In holland only 7%. Increase A lot off lumber is imported in to the usa from europe

@timothydillon6421 3 жыл бұрын

Yep. And that lumber supply isn't there anymore because the trees got diseased so the cut them all and sold it off cheap as substandard and china bought all of it. That caused prices so low many lumber mills in the us and Canada to shut the doors. Around the same time there were many mills that burnt down by arson. Some by environmental groups and a few may have started in the office when the payment book cought fire.

@jaimem6172 3 жыл бұрын

Dude can you tell me why my walls are cracking. My back door used to swing wide open but now it won't pass the second opening. Help !

@robertortega9228 3 жыл бұрын

Why dont you use steel stakes? Here in Arizona thats what we use and occasionally wooden stakes

@SkilsawDoctor 3 жыл бұрын

Matt you should see what lumber & concrete is for NYC! I had trouble getting a decent price before, forget about it now! All the plywood was used boarding up Manhattan which is a ghost town now. Looks like a nuclear bomb went off. Way worse than 9/11. Entire city has changed. 800,000+ vacant apartments!

@dakushlife5225 3 жыл бұрын

Hey mat, ive been building for a while now and see you guys still use handnails for your forming, I highly recommend using screws for forms and anchor bolts, makes for a much cleaner tear down, rather than pulling your hammer out and dealing with alot of movement whilst driving the nail. Just my opinion tho! Bang on fellas

@kaindosil8854 3 жыл бұрын

until your screws get filled with concrete lol, maybe screws are viable when you buy 10 rolls of tape to cover them before a pour... probably not worth the hassle. hand drive nails win... theres a reason they have been used to make formwork for however many years hahahah. dont try to outsmart the oldtimers you lose everytime

@johnbrownlee2341 3 жыл бұрын

@@kaindosil8854 Try Duplex Form screws.

@kookiedabear 3 жыл бұрын

Are you passing the lumber increase on to the client or is there enough built into the original quote to absorb it?

@MattBangsWood 3 жыл бұрын

Unfortunately in business we have to make smart financial moves, our contract outlines increases in lumber or any material

@lucasmancini7415 3 жыл бұрын

I’d say probably 15k for lumber increases. Not sure what you were paying before covid but I’m sure it’s way more now

@berserker8316 3 жыл бұрын

Framing question for you when you nail the bottom plate you are supposed to use galvanized nails can you use those on the top of the wall with the top plate as well?

@MattBangsWood 3 жыл бұрын

Yes, you can shoot galvanized into top plate. Just make sure you don't need to pull anything, they don't come out easy.

@berserker8316 3 жыл бұрын

@@MattBangsWood thank you!

@demetresrobinson2694 3 жыл бұрын

30% I'm in the process of getting a home built. I signed the contract 2 months before the price of lumber increased per my framer

@steveramirez1654 3 жыл бұрын

👍

@MikeHarris1984 3 жыл бұрын

6:02 - Fox!

@tristonevanko5726 3 жыл бұрын

25%

@drsh0ckalu 3 жыл бұрын

Back to the big blue Vaughan?

@gordonclark7632 3 жыл бұрын

Once the concrete is poured, what do you do with the footing material? Do you reuse it on another job?

@MattBangsWood 3 жыл бұрын

I'm up in the air.. either holding it and using it for my personal build in Oregon or using it for backing in this home, lol.

@andrei9308 3 жыл бұрын

👍👍👍👍

@chip4494 3 жыл бұрын

That’s the reason why I build everything out of Adobe...

@QR503 3 жыл бұрын

41 % increase

@1portico 3 жыл бұрын

30% increase? That is what I am seeing in the Bay Area at a minimum.

@JJ-jv1gu 3 жыл бұрын

what’s the difference between a post, column and pilaster?

@joeshmoe8912 3 жыл бұрын

I'm guessing a 40% increase. That seems to be the norm for lumber. But other materials are roughly the same.

@saulmoreno3252 3 жыл бұрын

Out in my neighborhood lumber is up 30% Cement board siding 15% and sheetrock about 15%... It's a smaller town but a lot of people have been moving here from bigger cities near by

@jordans1815 3 жыл бұрын