I was thinking you might need three hands but you got er done. Great as always. Cheers
@GuysPlayingWithTools2 жыл бұрын
Lol. A few extra hands would have been a good thing for sure, or maybe really, really long fingers 🤣
@Big_Johns2 жыл бұрын
Nice job Bill on the old edger, cleaned up and runs great now. 👍
@GuysPlayingWithTools2 жыл бұрын
Thanks! That not just an old edger, it's a McLane! LOL People must love those things, it sold before I published the video 🙂
@Big_Johns2 жыл бұрын
LoL.... nothing wrong with that!! 👍
@GuysPlayingWithTools2 жыл бұрын
@@Big_Johns I joke, but seriously, the guys that like McLane's are almost a cult. I admit they are tough as nails but if you ask a McLane guy about his edger he will happily explain in great detail how his is better than yours. They can cut through a bank vault, they can solve world hunger, they will be the first edger on Mars and if we sent them to the Ukraine army, the war would be over in time for lunch... 🤣🤣🤣
@Big_Johns2 жыл бұрын
LoL Bill, those must be some pretty awesome machines if they can do all that. Does it also hold the secret to the perfect relationship?? 🤣👍🏼
@GuysPlayingWithTools2 жыл бұрын
@@Big_Johns Only the female ones, and they aren't talking. LOL
@HobbyMotorDK2 жыл бұрын
Nice fix Bill - nothing beats an old B&S flat head👍
@GuysPlayingWithTools2 жыл бұрын
👍 I agree 101% It was only online for 1 day before it found a new home. 🙂
@mr1pearl2 жыл бұрын
I like the old motors got such a great sound !
@GuysPlayingWithTools2 жыл бұрын
Me too👍 They last forever if you visit the oil once a year.
@antoniorivas5582 жыл бұрын
Hi Bill have a McLane Edger numbers and engine ID, 121602 0279 E2 0011208FB, have the same problem as you had. I installed a new diaphragm kit , cleaned out the jet and seat. Finally dropped the tank cleaned everything out , inspected the two tubes, good shape. Still have to put fuel to get it started. Once started, runs like a top. I’m stumped.
@GuysPlayingWithTools2 жыл бұрын
No worries, we have all put a carb on twice. If it's running good you have half the battle won so lets list what to check (in order) I am covering a lot of bases here because it's not easy when I can't hear it. 1)New gasket between the tank and carb? That could cause this for sure. 2) Did you note the number of turns on the jet screw? A minor change can cause hard starting. Get it running and adjust it until it sounds it's best and that should be good. 3) Are you 100% that the tubes didn't have any leaks at their respective connections? That would also make it hard to start. 4) When you removed the jet did you clean out the channels in the carb or just the jet screw? It's always a good idea to clean out the entire carb with carb cleaner or a ultrasonic cleaner. Mine came from Harbor Freight for ~$80 and works great.(no, they don't pay me or anything LOL) Let me know, I have a thing for old McLane's and want to know if it goes. I have more suggestions but I would start with these for sure.
@antoniorivas5582 жыл бұрын
@@GuysPlayingWithTools I have everything apart right now. I blew on the large tube and cover the opening, no leaks. The small tube did the same, no leaks. I have new tank gasket coming In tomorrow. I did count the new of turns but I really don’t know if the was the original problem, the owner did put gas down the carburetor to start it. Maybe he fooled around with it before? I just bought at a garage sale for $40.00. Yes I cleaned everything thing with carburetor cleaner twice and blew everything out with compress air. I will let know again haha, once I get it back together. The kit is coming in with a new needle and seat, I think I’m just to to install them.
@GuysPlayingWithTools2 жыл бұрын
@@antoniorivas558 Ok, one other thought. when you put the diaphragm in you used a new spring and retainer, right? I am not doubting your ability in any way but I am remote to you, so I have to say obvious things sometimes. The order the diaphragm parts go is (starting at the carb, going towards the plate) spring, aluminum retainer, gasket. The retainer(aluminum ring) only fits well on one end of the spring(decreasing radius spring) then the plate goes on gently and slowly, making sure nothing moves out of place. Let me know, I will help where I can
@antoniorivas5582 жыл бұрын
@@GuysPlayingWithTools Yes, I did put in new diaphragm spring, and retainer. I installed them just like what you stated. I will back to when , I have the other parts. Thanks so much
@GuysPlayingWithTools2 жыл бұрын
I was sure you did and I hated even asking but I had to since I can't see it myself. It really feels like a clogged jet or misaligned diaphragm from here.
@aelawncare3463 Жыл бұрын
Nicely done! I just bought 1 yesterday off from fb marketplace.
@GuysPlayingWithTools Жыл бұрын
Thanks. I am sitting on 4 right now. They last forever. I am sure you are gonna love yours
@majorpayne52892 жыл бұрын
Man, is that thing overly-built or what?! Many of concrete scars & scratches due to these lil beasties! Good repair video. 👍
@GuysPlayingWithTools2 жыл бұрын
Yeah, you could run over a McLane with your car and it would hurt the car a lot more than the edger, they are pretty tough
@pajarocampana7980 Жыл бұрын
Great video. What is the part number on the muffler?
@GuysPlayingWithTools Жыл бұрын
Thanks! Oregon makes a really nice quiet muffler for this one that's only $8 or $9, #35-005 It's a bit thinner and longer than stock and easier to work with.
@christiandawkins951 Жыл бұрын
Do you happen to know the parts number for the whole carburator as a replacement.
@GuysPlayingWithTools Жыл бұрын
I don't usually use the stock ones when I replace a whole carb, the aftermarket ones for these are pretty reliable and a lot cheaper(like 1/4 the price). If you get one aftermarket, you need to look for 3 things, the dip tube length and how the air filter attaches, the rest is pretty much identical.
@almclean48352 жыл бұрын
That’s nice looking and running machine. I can see one issue with it, Mclane is spelt wrongly 😁😁
@GuysPlayingWithTools2 жыл бұрын
🤣 I will call them right away. 🤣🤣
@almclean48352 жыл бұрын
@@GuysPlayingWithTools 😁😁
@christylashley57829 ай бұрын
How how much
@GuysPlayingWithTools9 ай бұрын
If you just replace the diaphragm and clean the rest up, it's not expensive at all, under $10 for everything. Take pics and be gentle with the linkage
@allanmartinez1674 Жыл бұрын
Hello Bill I have the same edger but I don't know anything about it do you know what's the engine number located at so I can order parts for a tune up
@GuysPlayingWithTools Жыл бұрын
If it is running, are you thinking oil change, air filter, spark plug.... or is it not running? I ask because I would recommend 2 completely different things
@allanmartinez1674 Жыл бұрын
@@GuysPlayingWithTools I was told is running try to start it but it won't will crank but won't start
@GuysPlayingWithTools Жыл бұрын
@allanmartinez1674 If it's been sitting a while,, drain the tank and check for rust, if it's clean enough, put fresh gas in and use starter fluid to give it a head start. If you get nothing with starter fluid, check the wiring. Picking one up that won't start can be a little intimidating if you don't work on them all the time, you can grab my email from my home page about area and send me a pic if you want to, I would be happy to walk you through all the steps I go through before spending any money on one I pick up.
@allanmartinez1674 Жыл бұрын
Is this 2 cycle do I have to mix gas and oil
@GuysPlayingWithTools Жыл бұрын
@allanmartinez1674 No, if it closely resembles the one in the video, it's a 4 stroke. The easy way to tell is to look for someplace to fill the oil. If you find anything, it's a 4 stroke. 👍
@MyGreenLawn20192 жыл бұрын
Hey I one I was given is like this one
@GuysPlayingWithTools2 жыл бұрын
These are an easy sell if they are all together. I never keep one for more than 2 days once it's done.
@thethirstymoose Жыл бұрын
Why does the blade constantly spin
@GuysPlayingWithTools Жыл бұрын
Good question. Nobody ever caught that. The belt was new, and I used a ribbed belt. It settled down after a few minutes of use.
@thethirstymoose Жыл бұрын
@@GuysPlayingWithTools mine spins all the time too, thats why I was asking..what size is it?..is it coated,?
@GuysPlayingWithTools Жыл бұрын
@@thethirstymoose It had a rubbery coating. I always use auto belts, they are at least as strong as the factory belt and 1/3 the price 🙂 (plus, you can get them anywhere car parts are sold)
@Hootson Жыл бұрын
Hey Bill. I’m trying to find the part number for a diaphragm. Model model 801-3.5rp-ca. struggling to find online. Any ideas?
@GuysPlayingWithTools Жыл бұрын
I will look for it in the morning. What's the carb model?
@GuysPlayingWithTools Жыл бұрын
Skip that, I know which carb it is. I will look up the ones I used first thing in the am. 👍
@Hootson Жыл бұрын
Thanks Bill!!
@GuysPlayingWithTools Жыл бұрын
I "think" this one from amazon will work, the kit I used isn't currently available. If your carb looks identical to the one in the video there is a 99.9% chance it will work. www.amazon.com/Canamax-6PCS-5021-Diaphragm-Gasket/dp/B0C52WTW33?ref_=ast_slp_dp Let me know how it goes! 👍
@Hootson Жыл бұрын
Thanks again Bill. Excited to get this edger working that I picked up for $20.