first rule of this job, NEVER stress... take ur time.. speed comes with practice :P

Alot safer then the forklift videos I’ve been seeing on here

I have 30+ years on all kinds of forklifts. Looking good there. Keep up the good work and be SAFE! These machines are dangerous.

Why are we so high and mighty and proud to be vets on this machine 😂 she did fine and will get better with time. In 6 months you’ll see a huge difference

This is asmr. The sound of that truck brought me back awhile I had to listen a few times over

Finally a a safe operator

Don't listen to what anyone says find your own way of doing the job the faster you go the faster accidents happen as someone said they won't remember how fast you are but they'll for sure remember the fucks up you've made

Wide aisles. Operators dream. Ran a Drexel for years in the tightest aisles. Barely enough room to get off the machine. Full pallets of paper, soda, up on the third rack. Fun times!

That must suck having to eye ball from down there. We have cameras and lasers on ours so we can see where are forks are going.

Love seeing another girl in warehouse work! ❤️

Yeah fair play, slow but safe, go at whatever speed is comfortable, and you won't kill anyone 😉

This is why I have much respect for forklift drivers

Oooooooh..! Nudged the pallet there. Done good taking your time and not rushing. Nought wrong with making adjustments

Truly, nice work. Driving lifts for almost 20 years, seen a bunch of disasters, safety is #1. Skill and speed are acquired

I think youre trying to rush. Plus, you seem very tense. The controlls were jerky and inconsistent. You selected the wrong controlls a twice. Don't forget your observations too! Its not easy, especially when you start out. Its very daunting. Well done and be safe always! 😁

Slow is smooth, smooth is fast😎

I wish my job had aisles that wide 😂😂. I work at target and the aisles are tight. I love my reach truck

Ignore the haters and the guys claiming to be level 10 forklift ninjas. I've been at this for a while and I think, with some more time at the controls, you'll be a fine operator. Just stay safe, work on getting smooth, and let the speed come naturally. I'd be happy to have you as a trainee ESPECIALLY if this was your first day.

Good job! Initially. It's best not to rush the process. Believe me with time the speed will come

Good job operator mwezangu

We have cameras on ours . Super helpful for going super high and avoiding that annoying pallet push when your forks are to low or too high

Every time I watch a forklift video I remember that one video where the guy brought down the entire warehouse by accident. He is basically fucked for life. Be careful on the job

Very good 👌 ❤

7yrs on one of those, minus 25°c export meats. Our rule was driver picks up😂

Good effort. However, you can cut your spacing in half. If you are working in a freezer you will have an issue with how you are doing it. Position the forklift towards the middle of the lane. Raise your forks so they are ready to grab the pallet. Swing the forklift around and go into the pallet. This will give you more room to take the load and swing back out as you lower to the ground.

Damn spongebob you gotta lighten up on the controls.

Good job. When I train I say tips in before you extend. Also up top pro tip. U can see a slight reflections on the pallet. Before tips going in. Keep it smooth

They must not make incentive at this wsrehouse

Rookie skills

Very well done. Try not to lift the pallet so high. If you position the forks a certain way all you gotta do is tilt all the way back and the pallet will raise enough to get it off the shelf

Nice mama💪🏽

being 19 and a reach truck operator is a crazy feeling

Lovely working

I think i need to drive reach truck now. Im tried of sit down forklift. It hurting my leg and back.

Wait till you work in an incentive based environtment, those forks are already up by the time you hit the slot and lowered back down before you leave the isle.

that moment when you almost pushed the pallet off the rack

Man the aisles at the warehouse I’m at are a good foot and a half narrower

Practice makes perfect.

I would have gotten told off if I was standing that close to the forklift driver.

Better than me and safe

Once I used a crown deep reach the controllers was kind of complicated, until I test drive the Raymond deep reach it’s a good lift truck and took a high small tier pallet way up 30 to 40 feet. I try not to make hard turns or it’ll tip and fall to the side that’s the scary part of the job when operating a reach truck

I ran an earlier model, didn't like this one . Did 40 plus years and hated to constant noise. Think how many times you ran it up, lift banging like a blacksmith shop travelling to next stop fast as you can, radio blasting on pa system, other lifts running and constantly under the gun for production. Good job but I got to where I cherish quiet time.

Now i see why companies want the camera fitted... the time saved is immense

Wish the truck at my work were newer ours are old and slow

if you reach out before driving in you wont have to be looking top and bottom and you will only get the momentum of the mast if you touch the pallet rather than the trucks weight by driving in first

Il ne faut jamais stressé dans ce genre de métier Une fois, j’étais en train de charger un camion et j’ai fait tomber une palette de table pour l’Ukraine et je me suis dit à ce moment là, qu’il vaut mieux que je me concentre et depuis je me suis transformé. Bref à tout ceux qui ont lu ceci, passez une bonne journée, et n’abandonnez pas vos projets。

She works hard for the money. And skills to do it.

Así debe ser te paras enfrente y luego subes, no dar vuelta y la vez subir.

So how many pallets per hour csn you guy unload and load

Always tilt forward before extending your forks

The world of watch me do my job.sigh... Heres your participation trophy 🏆

Умничка

The forklift is doing the work, not you 😅

Don't stress too much. It gets easier with time. Try to go superfast, that's how you fuck up. Good job! In just a couple of years, you'll be fluid, and fast as grease lightning.

Nice

Wish my lift would reach that fast.🤣 The Hyster I drive takes damn near 10 seconds to get to the second level.🤣💀💀💀

Thats safe and standard ❤

Go easy on them hydraulics. No need to push them to there max, slow and steady wins the race.

Can you please do a proper vedio about order picking rf gun scanner

When you see a female operate it’s like poetry in motion

I am also Reach truck forklift operator madam

Wonderful

"Pudge has driven the forklift" "Madge" "Wasn't your name Pudge" "No, it's always been Madge..." "Uh, her"

I’m impressed I can’t believe a girl could do this and I do this every day

Painfully slow. My forks would be at the right hight by the time I'm lined up with the airslot

more videos using raymond...hope you could show what is you routine do and donts in stacking racks...thanks and be safe always

I had the hardest dam time learning how to drive one of these dam things 😩..Ev'ry thing is bass ackwards...

Muchos errores. Primero al momento de coger una paleta desde lo alto necesitas inclinarlo para poner el peso hacia atras y no para adelante (esto puede hacer que el forklift se vaya para adelante y te laastimes seriamente).

❤❤❤

Shit. I would've shorted that pick slot and moved on.

Nice and safe but I could put three pallets down on your time 😊

Shocking driving I've been driving forklifts 30 years thats terrible didn't even get the forks in pallet 1st time

Oh she new new

Forks weren’t properly leveled, and you shouldn’t just ram them in like that. You can see you moved the whole pallet. You potentially could have taken down that rack if it was crappy enough.

Wow a lady using reach truck forklift. In my country you will never see such girl doing these kind of job.

Yep, that's about where I'm at after 3 weeks, they ain't easy to use, especially if it doesn't have a camera on the forks

Job

🤩🤩👍👍👍⚘⚘

Its odd to see how you lined up to your load but I guess everyone has there own way about it. Some more practice and you will go a long way.

I am for klipt operator i am from india i am coming to your Company working 😊

Work hard 😂😂😂😂😂😂

I am reach truck operator I need a job

❤

She has her forks in too much otherwise she'll clip the pallet at the back of it

does your warehouse have the 3 Bay rule?

What is the point of a reach truck here? I thought they were made for going deep into racks. What this person is doing could be done with any stand-up lift simply by pulling all the way into the skid.

That looks like crawford

Too slow lady anyway good job

Raymond's and Toyotas are easy to handle

I can remember the height so u dont pulse it u just raise up n extend same height every time

Can i get the job forklift or highrich.i am from india

She has one of the Jerky ones. I hate the Jerky ones that have a bit of delay when you use your thumb on the joystick.

Really slow you must be new on the fork

Work hard? You’re literally going the slowest you could possibly go on a reach

Good if new

Rookie

I kinda miss driving reach trucks. Although they aint fun when the motor goes up in smoke. Smells horrible. Keep driving and maybe you can get up to how good i was.

I need forklift job

They should pay u guys more

Iam forklift operator