Mecha King Kong Kong Assembling Guide | No Fast Forward
Рет қаралды 18,482
2 жыл бұрынThis video we will show you how to assemble Mecha King Kong, no fast forward, full tutorial. We used Kingroon KP3S and KP5M 3D printer printed a 200% Mocha King Kong. It takes us one month and 4.9 KG filament.
But we made a mistake on the shoulder parts, please remember to swap left to right. Shoulder parts means the shoulder cover and the part it covers, making sure the screw holes on the back side.
Please remember to use glue, some parts cannot stick together without it.
MECHA KING KONG:
cults3d.com/en/3d-model/game/...
toymakr3d.com/product/57-mech...
Credit to: TOYMAKR3D
Get KP3S:
www.amazon.com/dp/B08F51DPRX
www.aliexpress.com/item/40012...
www.ebay.com/itm/154649781982
KP3S Upgrade Collection:
KP3S BASE:cults3d.com/en/3d-model/gadge...
KINGROON Z-AXIS STABILIZER WITH 608:cults3d.com/en/3d-model/tool/...
KP3S TITAN V6 VOLCANO FAN DUCT:cults3d.com/en/3d-model/tool/...
KP3S DRAG CHAIN MOUNTS: cults3d.com/en/3d-model/tool/...
KP3S Y STEPPER MOTOR INSIDE CASE:cults3d.com/en/3d-model/tool/...
Kingroon_KP3S_Spool_Holder:www.thingiverse.com/thing:463...
We will update more tutorials soon. Please subscribe to our social media channel to get it in the first time:beacons.ai/kingroon3d
@ikmalxhakim4419 2 жыл бұрын
That's totally insane and cool prints I ever watched!
@Kingroon3DOfficial 2 жыл бұрын
Thanks!
@psx1986 2 ай бұрын
Bruh, what did you scale that too? Mines at 100% scale was already hard enough to put together 😂. Bout to start on my Mechagodzilla next
@agj9115 2 жыл бұрын
Amazing!
@Kingroon3DOfficial 2 жыл бұрын
Thanks!
@antok86 Жыл бұрын
pla? what filament the gray looks good
@damianculla2481 2 жыл бұрын
Muy bueno!!!!!
@Kingroon3DOfficial 2 жыл бұрын
Thanks!
@lucasblasco6610 8 ай бұрын
Buen trabajo. Que altura tiene ?
@pabloalcaraz9423 2 жыл бұрын
Excelente trabajo 👍 cuánto kilos de filamento usaste ?
@mememania4500 Жыл бұрын
4.9 kg lo dice en la descripcion
@richiebulabon5037 14 күн бұрын
I have seen this in toy maker 3d channel is this the same design
@toddcoello6461 2 жыл бұрын
I think I'm going to look further into your printers also. I think I might get one.
@Kingroon3DOfficial 2 жыл бұрын
Thanks for your support! Just made a coupon code for you, if you decide to get one from our official website: kingroon.com, it’s “Kingroon”. 10% off. Have a great day!
@toddcoello6461 2 жыл бұрын
How long did this take to print at 200% I see u used supports so that takes longer. I completed the model at 100% and it printed without any supports on anything and turned out great.
@Kingroon3DOfficial 2 жыл бұрын
We use several KP3S and KP5M to print it for about one month. It’s a pity to know that, we use supports, too. Anyway, 100% is the best.
@toddcoello6461 2 жыл бұрын
@@Kingroon3DOfficial well of you ever try again or the God zilla one just know that no support needed at all. I have a small KZfaq channel I'll upload it if I do it
@Kingroon3DOfficial 2 жыл бұрын
@@toddcoello6461 Glad to know that! We have got that model for months, and be struggling with its size. So let’s be unfair to make it smaller. LOL We should start the printing soon.
@WilliamsIndustries Жыл бұрын
Very nice, what layer height did you use?
@Kingroon3DOfficial Жыл бұрын
0.2
@HReality Жыл бұрын
How tall is that sucker at 200 and what size printer?
@HReality Жыл бұрын
So, are you gluing all these? I was thinking they were friction fit.. also, looks as if the twist screws for the inside of the knees are missing
@Kingroon3DOfficial Жыл бұрын
Mostly, some are friction fit.
@toddcoello6461 2 жыл бұрын
I'm printing this right now. What scale did you make yours? I'm doing just 100%.
@Kingroon3DOfficial 2 жыл бұрын
It’s 200%. 100% would fine.
@oldplankme 2 ай бұрын
The struggle was real in this one jeeez lol
@ragnarokk7384 2 жыл бұрын
Do the Mecha Godzilla pls 🙏🥺
@Lee-Darin 10 ай бұрын
What about a 3X?
@Lee-Darin 10 ай бұрын
How can I get one? I don't have a 3D printer
@baddabaddabaddaswing Жыл бұрын
Could it be done on a printer that has a bed size of a ender 3?
@Kingroon3DOfficial Жыл бұрын
Of course you can. We use the KP3S to print some of its parts, its bed size is 180x180mm. But maybe not 200%, some parts requires 300x300mm heat bed. Actually it’s not necessary to print with that size. Normal size would be great. Remember not to add any supports, we made mistake on that😂
@DirkSlyther86 4 ай бұрын
Which Filament is the Grey? Silk? Pla or petg?
@Kingroon3DOfficial 4 ай бұрын
PLA
@baljazz Жыл бұрын
Can you list the filament you used?
@Kingroon3DOfficial Жыл бұрын
You can find them on the kingroon.com
@zugalo333 Жыл бұрын
I need one 😫
@mioliveira9760 2 жыл бұрын
Up to how many percent can I make ender 3
@Kingroon3DOfficial 2 жыл бұрын
Up to 150%. But we really recommend to keep it 100%, it’s easier to keep and maintain.
@mioliveira9760 2 жыл бұрын
@@Kingroon3DOfficial thanks all no support ?
@Kingroon3DOfficial 2 жыл бұрын
@@mioliveira9760 No, you still need to decide it based on parts. Some of them requires support.
@robotbiru5547 Жыл бұрын
Can you make mecha king ghidorah x
@Kingroon3DOfficial Жыл бұрын
Yeah, it’s coming soon. And we make it 100% this time. Still printing the gray parts.
@robotbiru5547 Жыл бұрын
Are this king ghidorah full mecha
@Kingroon3DOfficial Жыл бұрын
@@robotbiru5547 Sure, it is. It’s a huge one, about 3 kilograms, with four colors. A great cool model from the same author.
@baljazz Жыл бұрын
There is a mech ghidora version? Can't find it
@Kingroon3DOfficial Жыл бұрын
@@baljazz Here’s it: cults3d.com/en/3d-model/art/atomic-dragon-mecha-godzilla And we are going to assemble one today on our Facebook Group
@gojirafan8316 2 жыл бұрын
Can you print it in 75% ?
@Kingroon3DOfficial 2 жыл бұрын
Sure, actually we wish we didn’t print it in 200%. 100% should be fine. And we are now ready to print the Godzilla, in 100%. Will publish it soon.
@gojirafan8316 2 жыл бұрын
Thanks. I printed his jet jaguar in 50% and it was really messed up.
@gojirafan8316 2 жыл бұрын
Cant wait for the mechagodzilla
@Kingroon3DOfficial 2 жыл бұрын
@@gojirafan8316 75% might be too small
@Kingroon3DOfficial 2 жыл бұрын
@@gojirafan8316 It’s a huge project
@damianorellana819 Жыл бұрын
what colours is ???
@Kingroon3DOfficial Жыл бұрын
Gray, white, black and orange.
@user-kc9ux8nz7u 2 жыл бұрын
Качество печати конечно так себе.......
@Kingroon3DOfficial 2 жыл бұрын
By using PrusaSlicer, we have been improved our settings now, it helps us get better prints. Our latest tutorials should be helpful.
@user-kc9ux8nz7u 2 жыл бұрын
@@Kingroon3DOfficial this is a joke?))
@Kingroon3DOfficial 2 жыл бұрын
@@user-kc9ux8nz7u No, it isn't.
@faturhmc1457 Жыл бұрын
Toymakr3d
Marvelous Videos
Рет қаралды 31 М.