How can a person be so happy, cheerful and smiling ALL THE TIME ?

Move 'em on, head 'em up... Head 'em up, move 'em on... Move 'em on, head 'em up, rawhide!

Shoutout to the proper land management practices

i came to watch that beautiful smile :)

Haha haha 3:30 dad throws up the horns....rock on!!!!

The float inside the back bowl of the carburetor may be stuck in the open position or have failed, or the needle valve the float controls may be leaking by the seat. Replacing the needle valve should be done first; as it is usually easier and cheaper than replacing the entire float assembly. There is a large "screw" on the top of the back bowl. Loosen that screw and remove it; the needle valve will be therewithin. After you replace the needle valve you will have to adjust it to ensure the bowl remains filled to the desired level. Examine that "screw" carefully, and you will notice it can be "adjusted". There will be a window or another screw on the side of the bowl. If there is a window, "adjust" the screw on top until the gasoline level is just at the base of the window. If there is a screw in lieu of a window, remove the screw and adjust the first screw located on top of the bowl until the fuel level in the bowl is just below the second screw hole. If replacing the needle valve does not solve the problem, then you will have to remove the associated float and check/replace it. There are four horizontal screws holding the back bowl on, they are on the backside of the back bowl. Remove them and you will see the float therein. The float may be hollow, but in any case it must be capable of floating in the bowl of gasoline. When the bowl is full to the desiered level, the float will rise and shut the needle valve so gas can no longer enter the bowl. Good luck, let us know how it goes!!!

Wow! 65k subscribers! Congratulations Laura. Love the intro. My family is so happy for you and your success. Such an inspiration

I absolutely adore this channel, it's so wholesome! 🥰 Watching your videos always puts me in a good mood. 😊

The orange skies from the California wild fires have finally reached us in Connecticut. I noticed them in your video where you were talking about the Pickup...

Well what do yuh know?! Was just thinking about you 2 the other day, felt like a while since we've seen your faces, glad to see y'all as always, Dad as well, he's awesome too. Stay awesome, we'll see y'all on the next one.

Good job Laura....you've come a long way since your first vid.... you are a natural and it shows you love what you are doing.

the seed corn things alot more involved than I ever thought...Thank you for sharing and the livestock updates-n-stuff...tap the float bowl with a screwdriver handle...pretty land and beef cattle Thanks again Laura Farms..Enjoy ... Love Kelly ...!!

Love the opening graphics!. Good job keeping those cedars down. They are real desert makers. They pull all the water out of the soil and nothing grows around them.

I'm a simple man, Laura uploads, I watch............Happily!

Just a thought It's been a long time... and this is just an opinion... nitrophyl floats....they don't like ethanol blended fuels. The floats (both of them) develop a leak, and fill the bowl full of fuel. So they sink to the bottom of the bowl, then the needle and seat reacts to the fuel level as too low, and it kept pumping more gasoline into it until eventually it has no choice but to come out the vent tube. I'd take the transfer tube & fuel bowl off. Reassemble on workbench. Blow regulated air (7 psi) through the transfer tube, into the fuel bowl using a rubber tipped blow gun. Check the needle & seat valve for leakage when float is up, and check for airflow when float is down. I would also give it a Oil Change as well after the repair ( oil might be contaminated with gas)

Float's stuck on the carb. It's a Holley carb, so it's easy to access. There's four screws holding in on, (and since it's a four-barrel, there's a float in the back, which looks like the one that MAY be stuck, so pull the one facing the rear first.)

Hi from South Africa love your videos you Grant make a wonderful couple.

Glad to see your dad finally got something red on the farm

Laura has so much fun while working on the farm. Hope she is taking business administration & agriculture for her major as that is she needs for her farming which will be her future livelihood in a few more years.

Americans and their definition of hill always amaze me and cracks me up.

Good to see the two of you so happy.

Black shirt + camo shorts = official uniform of America Grant is making me proud, as usual.

Nice video and new splash screen! Well done! Was fun to see ya'all herd your moo'ers . Take good care of Grant! Have fun at school. See ya in a week or so.

Keep on keeping on, that's big country.

I love your videos! You and Grant are like watching two grandkids starting to farm. My grands are about your age!

OMG, you have an intro. You've made it.....

Your videos always bring a smile to my face :)

Take the radiator cap off and drive a HEMI under it!!! The float inside the carb is not shutting off the fuel. The float may have a hole it but likely the needle and seat need replaced. Go to NAPA and get a carb kit for that beast.

Awesome update . like the new merch.👍

Nice designs on the merch!

That smile!

Love the new intro! Always excited to see new videos.

Agree with Grant it's an auger wagon. Shout out from a Hampton NE grad. I enjoy your channel.

Enjoyed your vlog! Really nice merchandise so much to choose from! Have a nice weekend!

Love Grant's Roadkill shirt 😃

Really cute video. Sound was a little off for the in vehicle parts. The cows will be very happy in the new location...lots of exploring ahead for them. 😊 Love the new intro!!!! So awesome! Congratulations on your recent podcast. It was amazing. And nice to see your new merchandise introduced. Thanks for posting. We enjoyed it. 🥰

Love watching you two, and your family efforts.

Pritchard Service is absolutely right. Don't keep trying to start the truck until you get the carb fixed. You are dumping raw gas right into the engine. Just get a carb kit and carb cleaner and rebuild it. It should take a backyard mechanic about 2 hours or so - a professional less than an hour. Try to avoid ethanol in any older vehicle and small engine. Ethanol will slowly dissolve seals, gaskets, and fuel lines in any engine not designed for it. The residue will, in turn, clog carburetors (among other things) causing things like stuck floats. Sorry to say to corn farmers in Nebraska, but ethanol is not the boon to mankind it is cracked up to be. It is too late for Stabil or Sea Foam although they may help delay problems in the future. Love the channel. Grant, you are a lucky guy. Laura is the most positive, upbeat, happy person I have ever known of. 'Course Grant is a pretty nice guy himself, so pretty good match up!!!

Laura the Sunshine Girl ☀️

I know this is going to be a great video!!!

Love the cow side of the farm ❤

Pretty cool. Haven't really seen the cattle side off your farm yet.

oh the sound of that truck is so awesome, i can listn to that sound all day long :P

Great upgrades

You 2 are awesome , thank you & have a great day

That intro was awesome congrats laura

Be Good Stuart’s of the land the land will take care of you.

Ohhhh a saltlick!! Us kids always took a lick of it when we went in the barn. Guess it was ok since we all survived and are over 60 now!! 😂

Love the intro!

11:05 "Awright, the ... knock it off! Hey, knock it off!" LOL ... that's bulls for you. We've had them do that an reverse each other into the star picket fence - had to straighten a few pickets afterwards.

Cool! I've never seen seed corn harvested Thanks for teaching a fellow farmer

float in carb needs to be adjusted or the needle valve is stuck open , Needs to be taken apart and mostly cleaned but put a carb rebuild kit in it

I love the Laura Farms intro!! And the merch too!!

The graphics for your opening credits n such are awsome! Good job!

I love these videos!

Carolina Mustard from Jimmy Jacks in Iowa City is the BOMB! Love this channel and best of luck to both of you!

Love the intro graphics, really missed 'catchin up' and all that. So need our Laura Farms updates, or we'll all switch to LEAAD Farms, then come back anyway! Like the merch, gonna order some, but, with all that's goin on, might see it by 2050 downunder! Take care, this is the best.

I love the scenery shots, my family is from Kansas, and we used to go out there from VA every couple of years. I miss the Midwest. I drove my sons out to KS to see family this summer and lived the drive through the country. Also, everyone is so much nicer out there then here on the east coast!

Really like your new Intro.. very nice!!

Oooh a new intro :)))

The merch is 🔥🔥 I bought a tee and a hat

I really like the new intro, I like the simple style not the 'flash bang' some channels have.

Great video!

Hallo guys beautifull scenery👍

Like the new intro. That water trauf look like the bottom ring of a grain bin

My only advice with the old Ford is put a new Edelbrock carb and aluminum intake on it👍

Rewatching old videos I enjoy her videos hey Grant I have now chatted 48 farmers none call it auger wagon and the guys from Deere said it is a grain cart

New intro, COOL !!

Great intro

Love the new intro!❤

Just keep tapping on the bowl housing in the back with the handle of a screwdriver, not too hard. It will seat eventually. Need to let it run for a long while and get it flushed out. Rebuild takes a couple of hours for someone who knows carbs well if you want to go that route. Great seeing you guys, need more BB Ford action please!

Your dad needs a Channel. Your outstanding , he is outstanding👍🤩🌴

Very Impressive ... An official opening sequence and a sponsor.

Awesome intro clip

As others have said the rear float is stuck, if the truck has been sitting for any length of time you should have a complete carb rebuild. and keep gas stabilizer added to the gas. I was an ASE Master Technician and worked on lots of carburetors.

"Grant what do you like best about your new combine?" "It's green"! LOL

The new animation intro is really nice!

17:41 If that piece of grill was missing on the shirt? I wouldn't have been able to resist buying one or five.

Ford. I'm sold. NICE.

Love the cows. Mooooo 🙂🙃

That’s a stuck float. But that is a huge fire risk. Burned up my engine with on of those. Keep a fire extinguisher handy when you start it.

Needle and seat or float is sticking. 💞💕

Ya. ^5 to Laura, Grant. dad granddad, mother......you all!

Good old Ford. Mine is 1976 F-100 550K+ miles

I like the new intro

I love your videos:)

With your carby on the truck just try tapping the side of it the shut off pin on the float is stuck open 👍😉

The float is sticking tap on it with a small hammer (tap) Buy a bottle of lead additive and mix your gas. The lead lubricates and ther old Ford will love it. This is a simple fix. If you want more info im always watching! Good luck

Hey! Laura, you should get a Laura Farms magnetic sign for your Truck. For Advertising your site. ❤🚜

Like the new intro. Merchandise looks good, too! Also surprised to see they harvest seed corn by whole ears?!?

Eye makeup eyelashes look great :)

good to see you both back here and hows the wedding plans going .be well

Great video again Laura, great to see the cows 🐄,the merch looks great, will it be available to us in the UK,stay safe.

Amazing intro

In the market for a truck... Brand matters, but more importantly, get at least a 3/4ton truck or don't even bother. A half ton truck is basically just a car and has no use on a farm. Nice merch designs!

Soon we’ll have that many cows out here in nc

I AM NEW TO YOUR STREAM, I INJOY SEEING 👀 WHAT IT'S LIKE ON A FARM 🚜 😄 !!!!

17:32 Old trucks (machinery in general) are like old people: You can't just leave them and expect them to be alive when you get back. They have to move around every day... I speak from experience (from being old and being a little like a machine, or so I'm told).

Nice intro!

In Australia we call the chaser bins