Mercedes-Benz M276 Spark Plug & Ignition Coil Replacement DIY (W204 C300, W212 E350, GLE350, ML350)

Рет қаралды 97,829

Күн бұрын

►Replacing the spark plugs on a Mercedes-Benz M276 engine is a bit more involved than most other cars you come across. To access them, you have to completely remove the intake manifold and throttle body. Because of this, we recommend replacing your ignition coils while you have all of that disassembled.
This video covers a wide range of Mercedes cars and SUVs with the M276 engine, such as the W204 C300, W207 & W212 E350, GLE350, and ML350. Seeing as the intake manifold and throttle body have to be removed, our M276 spark plug kit linked below comes with all the necessary replacement gaskets.
Join us as Michael Hidalgo, FCP Euro's resident DIY expert takes us through the step-by-step process of completing an ignition system service on this Mercedes-Benz E350.
Index:
00:00 - Intro & Tools Needed
02:00 - Mercedes M276 Engine Cover & Airbox Removal
04:15 - Mercedes M276 Engine Intake Manifold Removal
08:40 - Mercedes M276 Engine Ignition Coil & Spark Plug Replacement
13:54 - Mercedes M276 Engine Intake Manifold Gasket Replacement
14:53 - Mercedes M276 Engine Intake Manifold Installation
18:52 - Mercedes M276 Engine Airbox & Cover Install
20:52 - Thanks for Watching!
Shop the parts used in this video:
Mercedes M276 Engine Spark Plug Kit: www.fcpeuro.com/products/merc...
Mercedes M276 Engine Ignition Coil: www.fcpeuro.com/products/merc...
This video applies to the following vehicles:
2011-2014 Mercedes-Benz CL550
2012-2015 Mercedes-Benz C350
Mercedes-Benz ML350
2012 Mercedes-Benz ML350
2013 Mercedes-Benz ML350
2013 Mercedes-Benz ML350
2014 Mercedes-Benz ML350
2014 Mercedes-Benz ML350
2015 Mercedes-Benz ML350
2015 Mercedes-Benz ML350
Mercedes-Benz R350
2012 Mercedes-Benz R350
Mercedes-Benz SLK350
2012 Mercedes-Benz SLK350
2013 Mercedes-Benz SLK350
2014 Mercedes-Benz SLK350
2015 Mercedes-Benz SLK350
2016 Mercedes-Benz SLK350
Mercedes-Benz CLS550
2012 Mercedes-Benz CLS550
2013 Mercedes-Benz CLS550
2014 Mercedes-Benz CLS550
2015 Mercedes-Benz CLS550
2016 Mercedes-Benz CLS550
2017 Mercedes-Benz CLS550
2018 Mercedes-Benz CLS550
Mercedes-Benz S550
2012 Mercedes-Benz S550
2013 Mercedes-Benz S550
2014 Mercedes-Benz S550
2015 Mercedes-Benz S550
2016 Mercedes-Benz S550
2017 Mercedes-Benz S550
Mercedes-Benz E350
2012 Mercedes-Benz E350
2012 Mercedes-Benz E350
2013 Mercedes-Benz E350
2013 Mercedes-Benz E350
2014 Mercedes-Benz E350
2014 Mercedes-Benz E350
2015 Mercedes-Benz E350
2015 Mercedes-Benz E350
2016 Mercedes-Benz E350
2016 Mercedes-Benz E350
Mercedes-Benz E550
2012 Mercedes-Benz E550
2013 Mercedes-Benz E550
2014 Mercedes-Benz E550
2015 Mercedes-Benz E550
2016 Mercedes-Benz E550
2017 Mercedes-Benz E550
Mercedes-Benz E63 AMG
2012 Mercedes-Benz E63 AMG
2013 Mercedes-Benz E63 AMG
2014 Mercedes-Benz E63 AMG
2015 Mercedes-Benz E63 AMG
Mercedes-Benz SL550
2013 Mercedes-Benz SL550
2014 Mercedes-Benz SL550
2015 Mercedes-Benz SL550
2016 Mercedes-Benz SL550
2017 Mercedes-Benz SL550
2018 Mercedes-Benz SL550
Mercedes-Benz GL450
2013 Mercedes-Benz GL450
2014 Mercedes-Benz GL450
2015 Mercedes-Benz GL450
2016 Mercedes-Benz GL450
Mercedes-Benz GL550
2013 Mercedes-Benz GL550
2014 Mercedes-Benz GL550
2015 Mercedes-Benz GL550
2016 Mercedes-Benz GL550
Mercedes-Benz C300
2013 Mercedes-Benz C300
2013 Mercedes-Benz C300
2013 Mercedes-Benz C300
2014 Mercedes-Benz C300
2014 Mercedes-Benz C300
2014 Mercedes-Benz C300
Mercedes-Benz GLK350
2013 Mercedes-Benz GLK350
2013 Mercedes-Benz GLK350
2014 Mercedes-Benz GLK350
2014 Mercedes-Benz GLK350
2015 Mercedes-Benz GLK350
2015 Mercedes-Benz GLK350
Mercedes-Benz ML550
2012 Mercedes-Benz ML550
2013 Mercedes-Benz ML550
2014 Mercedes-Benz ML550
Mercedes-Benz GLE350
2016 Mercedes-Benz GLE350
2016 Mercedes-Benz GLE350
2017 Mercedes-Benz GLE350
2017 Mercedes-Benz GLE350
2018 Mercedes-Benz GLE350
2018 Mercedes-Benz GLE350
Mercedes-Benz GLS550
2017 Mercedes-Benz GLS550
2018 Mercedes-Benz GLS550
Mercedes-Benz GLS450
2017 Mercedes-Benz GLS450 4Matic
2018 Mercedes-Benz GLS450 4Matic
SUBSCRIBE: kzfaq.info?sub_c...
Get free parts from FCP Euro:
www.fcpeuro.com/page/lifetime...
Follow FCP Euro on:
/ fcpeuro
/ fcpeuro
/ fcpeuro
www.fcpeuro.com/

Пікірлер: 206

@ujustgotnomd 10 ай бұрын

Very nice step by step video, but I would like to make note that you do not need to remove the intake resonance manifold for this job. You only need to remove air filter box on bank 1, and remove the ME (aka Engine Computer). Once the ME is removed, you remove the dipstick. gently and carefully pull the thick harness that blocks cylinder 6 coil up and over the dipstick tube to give you extra space to pull that coil off. This job only pays 1.5-2 hours if you brought it into a dealership to be diagnosed and repaired. We do not remove the intake manifold as it is a lot of extra work. However it does not hurt to follow this method as it is a much safer way to perform this repair, just takes more time, and sometimes the thin vacuum line on the back of the motor can break or split even if your careful, and you will get a CEL if that happens.

@WestminsterFJR 4 ай бұрын

i need to replace the coil on #4 (front, driver side). sounds like i only need to remove the ECU to access this coil? do i need to disconnect the battery before unplugging the ECU? Thanks

@richardwhitaker4148 4 ай бұрын

I used to work at a Benz dealership years ago and thats when the M276 first came out. They always said whenever disconnecting a control module, to disconnect the battery to avoid any frying of the internal board. I could be wrong though. I noticed he didn't mention that in the video.

@nicholassekmistrz1268 4 ай бұрын

Thank you for the video, it was excellent resource for tackling this somewhat formidable task. I just completed replacing the plugs and coils on my 2012 E350 convertible and have a couple of recommendations to pass along. First, if the coils are original, bent needle nose pliers are not a nicety but a necessity on this job. My 13-year-old coils were fused onto the plugs and it took a tremendous amount of cursing and reefing to break them free. The bent needle noses were the only tool that would grip the little pull tab with enough force to remove them. Despite only gripping them from the tab, I had two of the coil shafts break and it took some effort to pry the pieces out of the spark plug chambers. Regardless of whether they the coils break or not, I strongly recommend spraying compressed air in each spark plug chamber after removing the coil but before removing the plug to prevent plastic bits or other debris from entering the cylinder chamber when the plug is removed.

@michaelyjko Жыл бұрын

The best step by step instruction to remove the intake manifold on M276 ever. Now I am confident that I can replace camshaft position sensors to stop oil from leaking to wire harness and migrating to ECU. Thank you so much.

@davenixon1920 2 жыл бұрын

One of the very best How To videos on cars I have seen yet. It's one of the many reasons why I buy all my parts from FCP. Easy to follow and didn't skip any steps. Well done!

@fcpeuro Жыл бұрын

Thank you for watching, Dave!

@kdao1007 Жыл бұрын

AGREED

@JR-km9zg 6 ай бұрын

What an aboslute GREAT video , I don’t work on too many Germans and was hesitant to even take the job in. but this was so professionally done. i can’t say enough good things, dealer quoted $1500 , i came in at $950 and saved my customer money and made a $600 profit thanks to this video

@Lefteris7 2 жыл бұрын

Please do more m276 and w204 (facelift vids)!

@patvancooley1480 6 ай бұрын

Pretty sure you've achieved one of thee BEST how to maintenance videos to date! Nailed it y'all! Thanks for inspiring diy confidence!!!!!

@fcpeuro 6 ай бұрын

Yay! Thank you!

@noname-sq9pm 4 ай бұрын

Thank you! the dealership wants 800 dollars for this service. You have saved my life

@fcpeuro 4 ай бұрын

You got this!

@gmans7859 2 жыл бұрын

Excellent Tutorial. I did this on our low milage 2015 some time ago. Note to others. DO the Coils as he recommends. I ended up having to pull Intake a second time. IIRC the Dealer wanted $1400-1600 to do this at that time.

@fcpeuro 2 жыл бұрын

Such a doable DIY to save a bunch of money!

@discerningmind 2 жыл бұрын

IMPORTANT! Michael didn't say this, but his work in the video verifies it. !!!For the spark plugs!!! !!!You have to use a torque wrench and set to the correct torque!!! Mercedes designed the heads in a way that the spark plugs must be indexed when installed. The only way to do this is by: 1-Only use approved spark plugs. 2-Only use a torque wrench set to the correct torque.

@JettaRedIII 2 жыл бұрын

I second this. Improperly indexed spark plugs can actually damage the engine (wish I remember where I read that).

@discerningmind 2 жыл бұрын

@@JettaRedIII I think I saw about the spark plug indexing on the channel of an Asian gentleman that works on his own Mercedes at home. I can't recall the channel name, it might be numbers or something unique, and there's what appears to be Chinese script in the video titles. You may have seen his videos, at the beginning of every episode, he changes into his shop clothes. He doesn't speak in the videos, they're all done in captions, in English.

@cesarbojorquez7418 2 жыл бұрын

@@JettaRedIII he is @Sr. Leigh great guy love his videos

@kevinhowden787 3 ай бұрын

Thank you guys so much for this amazing video. I bought the coil and plug kit and some tools from you guys and got the tools so fast. I got this done and saved over 2 grand from what the dealer quoted! I cannot thank FCP Euro and you enough for enabling us DIY'ers! My GLK is back to working perfectly!

@picksburghchris9497 Жыл бұрын

Thank you a million times!!! Had a misfire on cylinder 4 and figured i would just do all of them and the air filter as well. Your step by step process was well documented and I got the job done without a hiccup!

@fcpeuro Жыл бұрын

That is what we like to hear. Excellent job, Chris!

@picksburghchris9497 Жыл бұрын

@@fcpeuro any recommendations on cleaning intake and valves on these vehicles? (w/o removing the head of course) While replacing plugs and coils i got a glimpse at them and they are pretty caked up. My GLK is at 93k and im sure it would give it a breath of fresh air, at the least decrease op temp. Any advice is appreciated, thanks again!

@nghtrdr84 2 жыл бұрын

Thank you 🙏 bro for the details and walk thru, life saver - just did my #6 coil over and this video helped a lot, was able to get all the stuff out from the driver side and get busted knuckles changing the one in the back. Saved me $650 mechanic labor, $80 coil over.

@richsackett3423 Жыл бұрын

For others: Replace them all together. You don't want to do this again in a couple months when the next one goes stupid. After all: they are all the same age and mileage.

@JRounsborg 2 жыл бұрын

Just an FYI, This job CAN be done without removing the intake manifold. It isn’t easy but it can be done. And if you use a wobble socket by CTA tools it’s a breeze. Can be done in 45 minutes start to finish

@fcpeuro 2 жыл бұрын

We thought about showing that method but it would have been quite difficult to get it all on camera. That said there's almost always a shortcut!

@artyomkim7577 2 жыл бұрын

C class needs to remove Intake Manifold

@JRounsborg 2 жыл бұрын

@@artyomkim7577 definitely not. I do this for a living

@artyomkim7577 2 жыл бұрын

@@JRounsborg You can do it without taking it off but I dont think someone wants to have a leaking coil, broken wire tabs. Doing it with manifold or without will take same time.

@JRounsborg 2 жыл бұрын

@@artyomkim7577 a leaking coil? I’ve never seen a coil “leak” I remove these coils daily. I work for MB professionally. It doesn’t save any more time to take the manifold off. The only advantage is room. But then you have to replace the gaskets. Not worth it at all IMHO

@timgrishkevich4423 Жыл бұрын

Just did the job with no problems thanks to this video. Ordered parts from FCP too

@carminealoise229 2 жыл бұрын

What a great video , this technician has great mechanical ability who also walks you through the whole process flawlessly.

@g111penterprisesllc4 4 ай бұрын

Now this was professionally done!!! 10⭐️J⭐️Q⭐️K⭐️A⭐️

@benstr8156 Жыл бұрын

Your video was a big help. I've got same engine. Change plugs, coils, camshaft position sensors and manifold gasket in one go.

@HarryRugnone 11 ай бұрын

Excellent DIY guide! I'll be tackling this task on my 2012 MB E350 tomorrow. Appreciate your effort in demonstrating how it's done.😃😃👍👍

@vv1rd Жыл бұрын

I have a C350 and I have been putting off this job because it seemed too tedious to remove the manifold. This video showed that it's not as bad off a job that I thought, I'm going to tackle it asap. Thank you very much for this helpful guide!

@fcpeuro Жыл бұрын

Not bad at all! Just make sure you grab some new intake manifold gaskets to slap on while you're in there, as any damage to the seals on removal can cause some strange running characteristics afterwards if you reuse them. We have everything you'd need to get it done in our "M276 Ignition Service Kit" on our site!

@kdao1007 Жыл бұрын

I want to Thank you for the amazing detail step-by-step tutorial on Sparl Plugs and Ignition Coil for the M276 engine. I just did my very first E350 Convertible. This was so helpful in doing it right. love FCPEuro. Long time client and yall keep making it easy to do it yourself. Really appreciate how to approach engine work. Also will be replacing my camshaft magnets and sensors along with the sacrificial wires. Yall need to include the bolts on all your kits. It makes a big difference if you end up having problems with bad bolts or lose them. LOL Thanks

@bombardierchallenger7865 Жыл бұрын

Amazing video, very professional, no BS, thank you

@jeffrysoto7 2 жыл бұрын

Great video! Will reference this when I change my MLs!

@fcpeuro 2 жыл бұрын

Happy wrenching, Jeffry!

@OpaFPV 4 ай бұрын

This video is as good as it gets! Great job, Michael! I have done this job three times and #4 will be this morning. This video will speed the job! Thank you. I did purchase the complete Bosch ignition kit from FCP Euro.

@cesarbojorquez7418 Жыл бұрын

Please do more maintenance video for the m276. Things like pcv replacement. Thermostat, oil cooler gaskets. Great videos

@dcasteaux9181 2 жыл бұрын

Great video! Especially replacing the green (and expensive) plenum seals @ 14:05 - my Mercedes dealer re-used the old ones and car broke down 10 mins after collecting it from a £400 service as they re-used the old seals and they leaked!!!. One of the reasons I now self-service my cars. By the way, you don't have to remove the plenum to change the spark plugs: its possible to unbolt the air filter housing and gently swing it out the way as the flex coupling near the MAF can bend - this exposes the coils/plugs. Also, spark plug no 6 (near oil level tube) is a pain to access. Greetings from the UK.

@Mr_ManCity47 Жыл бұрын

Really good tips, I’m needing do that, but I already got the idea. Thank you FCP Euro 🙏🏼

@chocolatecakerecipe 11 ай бұрын

Just did this job 3 hours. Probably can do it in 2 hours now. -Do NOT need to take off the intake. -wire clips are a pain to get off. I learned a trick by the time I got to the last one. I would push down to release and while pushing down I would stick a nail on the other side to hold it in the released position and then use a screwdriver to tap it out. It worked great on the last clip. Too bad I didn’t do it on the previous clips. -last 2 spark plugs driver side a big pain.

@jackrubin Жыл бұрын

Great video - really appreciate tool numbers. Very clear, good pacing - thanks!

@lawrencecortez3262 Жыл бұрын

Very professional job well done answer all my questions l had in mind thank you for your time spent doing this video, God bless you

@user-cr2jv6bl9r 11 ай бұрын

MORE THAN EXCELLENT VIDEO FOR PEOPLE LIKE ME WHO LOVES DIY JOBS

@lykwid1 2 ай бұрын

Life saver. This video was excellent. GLK 350’s are a challenge to access spark plugs!

@fcpeuro Ай бұрын

Great to hear!

@yh-yd8ku 2 жыл бұрын

great video. Moreover, it was very timely for me. I have subscribed to your channel and will continue to enjoy them. From Japan

@niner_six_echo 9 ай бұрын

Outstanding video and just what I was looking for. I need to R&R the intake camshaft position sensor on the driver's side bank of cylinders and the plenum just covers it. I was stumped as to where the bolts were until I found this video. Even includes the tools needed.

@bartbixler3278 2 жыл бұрын

My Good People....Love it...

@1068andy Жыл бұрын

Hallo from Germany , Great Video , both ways are possible. The really important thing is the torque settings for the spark plugs. 👍

@enriquevargas6577 Жыл бұрын

Bro thank you for making this video

@r.weaver3769 Жыл бұрын

Also, before removing plugs, take a blow nozzle and clear any and all debris from around spark plug to save anything from falling into cylinders. Put dielectric grease in boot at plug to ease removal next service, unless you are going to replace boot every time you remove them.

@slidin5672 Жыл бұрын

This video is giving me confidence to do my 2015 c350 4matic with the same engine great video my guy!

@fcpeuro Жыл бұрын

You can do it!

@slidin5672 Жыл бұрын

Thanks!! Gonna try doing it tomorrow my only worry is the ecu computer! Do you have to disconnect the battery when you do?

@philipilizarov4624 Жыл бұрын

I did it without taking the manifold off, it was kind of a pain and the ass to get my big ass hands through there, but I did it :). Thank you anyway, wonderful video!

@kdao1007 Жыл бұрын

you really need to change the manifold gaskets though. There is a shelf life on those. LOL

@philipilizarov4624 Жыл бұрын

@@kdao1007 this I didn’t know

@patreilly4293 8 ай бұрын

Great video! I just picked up a 2019 GLS 450 with the M276 engine. This will be very helpful.

@fcpeuro 8 ай бұрын

Enjoy your new ride, Pat!

@DrAcid12 2 жыл бұрын

Thank you 🙏 much appreciated

@erictatum5116 19 күн бұрын

Great video!

@MBooth-jh9yd Жыл бұрын

thanks for this my friend, EXCELLENT video and helped me tremendously.

@fcpeuro Жыл бұрын

Glad it helped!

@Adrndvla 2 жыл бұрын

Wow so seamless! Would love to see this done on a CLA 2018. Amazing job on the videos guys !

@joseherrarte948 2 жыл бұрын

They’re easy

@tehammel Жыл бұрын

Great video - I love your kind patient way! I tried this in this past few days and have had real problems; 1) removing connectors on top of coils...yes, I pulled the tab out but these are not veery user friendly connectors! 2) pulling the coils off the plugs. I was only able to get #1 off and of course cracked the plastic. I tried getting #2 off the plug but the Lisle tool wouldn't fit. So it would not come off no matter how hard I tried. I wish you were here!!!! LOL! Oh - It's 2017 GLE350 and the access to the 2 bolts at the rear of the intake manifold is extremely poor so I was doing all this was the manifold on the car.

@kdao1007 Жыл бұрын

if you use a small 90 degrees pick, you can insert the pick into the opposite end of the connector and use the tip of the pick and lift the tab inside as you push the connector out. I had your issue until I saw a video w the tech inserting the pick and it came out very easily. Diry traps into that connector female casing and makes the male connect too stiff to disconnect. watch this removal part at 3:06 time slot, you can see how he picks the connector tab kzfaq.info/get/bejne/o6ebkrSEy6y2nX0.html also here is another great video on removal of the manifold, very easy kzfaq.info/get/bejne/oJt4jcybp9emd2Q.html

@kdao1007 Жыл бұрын

He used a pick first and then he used the snap on small flat head which I have a bunch every where. A must have tool for engine works

@user-iq1lh3mo2z 3 ай бұрын

Thanks!!! Great video!! Totally did it myself-who’s a big boy? I’m a big boy!!

@ljones43802 7 ай бұрын

Mike, thank you a thousands times. This was exactly what I needed. On the drivers side I ended up hooking a small nylon rope under the plastic tag to pull the coils, so easy. Damn Germans and their tiny hands! Thanks again.

@fcpeuro 7 ай бұрын

Love to hear it, nice work!!

@posterlion Жыл бұрын

This is an excellent how to video for this job. It shows all the bolts, the connectors, the vacuum lines, etc. Very well done. That said, please add disconnecting the battery cables before you begin. I noticed the battery cover was still on when you started the procedure. Does that ECU have power going to it with the battery cables connected?

@PouriaDehghani-rw5vc 3 ай бұрын

Thank yo so much for the video, please provide more videos on this engine. thanks

@Sympatiko85 2 жыл бұрын

Would be cool to see more on the m271 cgi engine from the w204!! Awesome guys thank you the info and great parts. With my m271 I have trouble keeping carbon away. I replace PCV system and parts. Wish there was a guide. Everyone should know to service the pcv system.

@fcpeuro 2 жыл бұрын

More to come!

@psycohosebeast1684 Жыл бұрын

Great video! More steps, but way easier job than trying to sneak everything out and back in with the manifold on for most people without damaging parts. Plus, you gotta have just the right tools for those tight spaces. And smaller hands would probably be easier if I had those. Only thing I did different was unplug/remove the ecu completely. Easy to do, more space and I think there's lower chance of potential damage.

@fcpeuro Жыл бұрын

Love to hear it, Geoffrey!

@jeffalan8637 Жыл бұрын

It was mentioned in another video (w/o removing intake) that disconnecting ECM will cause loss of memory and create a multitude of problems. Don't do it!

@totallybonkers Жыл бұрын

So much to break in there. Looks like more of a professional job. I will triple check the dealerships work to make sure the tech puts everything back exactly the way it was... My MB dealership techs like to shortcut putting clips back, and breaking clips and not bothering to replace them. Pisses me off when they do that.

@dadtube1936 9 ай бұрын

Thanks for posting - gave me the confidence to do the job myself. I would love to know what all the electrical connectors and vacuum lines along the way are for.

@kashiflivingston356 2 жыл бұрын

Great video thanks man… however when you remove the manifold, the vacuum line that’s held by the t25 bolt in the back…. Do you have a part number for that bolt??

@BMWI-gk9wh 2 жыл бұрын

I would love to see a timing chain cover gasket replacement on the w212 m276 e350. Its very common to have leakage and every m276 I have seen has the residue and small leaking on the timing chain covers on both sides. Can you do one of those?

@moebassidji8306 Жыл бұрын

thanks for the video,very informative,did you index the plugs when installing them?

@ndg49 7 ай бұрын

I've found that the driver's side is the toughest and the ECU removal is a must. Removing the ECU is easy, but you must be careful with the wiring and connectors. Is there a reason why you didn't remove it? I was using CC on the video to not disturb others around me, and that option sometimes misses words. I've always removed the Neg battery connector and set it where it won't make contact with any metal. The plug closest to the firewall on the driver's side is the absolute worst one to get access, and I've scraped a few fingers on that one. I don't have an electric impact wrench for removing nuts and bolts, but that seems to be a great little device to have. When I do the next tune-up on our W204 M276 engine in the Spring, I will definitely use this video as a guide. Great video!!!!! Great advice!!

@kschun5370 10 ай бұрын

Thanks for the video. Any video disassembly of the crankcase ventilation valve or the oil separator valve? I know it's a very difficult job to accomplish. Thanks.

@Psyko100 2 жыл бұрын

it looks like theres a 2nd air filter in the filter housing on the engine side, is my w204 supposed to have that? also thanks for doing some M276 diy's.

@TZ250FANATIC Жыл бұрын

This is a great video. It also convinced me NOT to buy the C43 AMG that I test drove this afternoon.

@alexrobles7600 Ай бұрын

You are the G.O.A.T.! Any suggestions on what to do if the connectors that go on the ignition coil are stuck? I've got like four that won't come off lol

@fcpeuro Ай бұрын

You are!!! Oftentimes, trying to push them in before pulling them out helps. An extreme maybe is trying to use a small pick to get the connector started.

@mr.selfdestruct1677 6 ай бұрын

Great info ! Quick question, i am having a valve cover leak,[2016 E350] seems like removing the intake and coils is the only thing that i need to do to remove the valve covers to apply the new sealer , any tips or anything else that need to be moved out of the way to remove the valve covers that you know of?

@mathieuconstantin3356 Жыл бұрын

Hello, Any recommendations on how to remove stuck coils I all of them are really hard to remove compare on how easy it was on your video any tips?

@FockewulfAz Жыл бұрын

Thank you for the great video! Do you need to lubricate spark plugs?

@richsackett3423 Жыл бұрын

Copper anti-seize ftw

@seeingit9337 2 жыл бұрын

Hi Fcp Euro you guys need a video of setting the timing of the cam shafts and or installing check valves and rattle kit for timing chain

@fcpeuro 2 жыл бұрын

We can certainly add it to our queue!

@seeingit9337 2 жыл бұрын

Thank you kindly alot of your customers are asking about this procedure like myself.

@brendonschultz7887 8 ай бұрын

If the coil clips don't come off easily, use a screw driver on the opposite side of the clip (without grey tab) to wedge the black plastic tab up and over the locking piece. Also if the coils haven't been changed in a while they may stuck on pretty tight, I used a small piece of rope wrapped around the "lip" to get a little extra leverage and lightly pulled with both hands and it came right off w/out damage. But be careful.

@posterlion Жыл бұрын

After further review, while this video is still good for those that want to replace the intake gaskets, there is no need to remove the intake to replace plugs and coils. Passenger side access is gained by removing the air cleaner assembly only. The snap clamp must be removed, but it is no big deal. Drivers side access is gained by removing the ECU only. Happy DIY-ing.

@frederickyahnsr.9004 11 ай бұрын

Sorry you misspoke, The ECU is on the Drivers side in the USA.

@posterlion 11 ай бұрын

@@frederickyahnsr.9004 Thanks. I edited it to drivers side.

@vincentlonbird1806 22 күн бұрын

Clean step by step, thanks! But do I need to disconnect the battery?

@fcpeuro 22 күн бұрын

Thank you for watching! Not mandatory for this job, but certainly not a bad idea to do so as a safety precaution!

@tongjiao5225 2 жыл бұрын

Great video. I just followed to replace mine. I found a lot oil on intake manifold. What part failed and should be replaced?

@glasser2819 2 жыл бұрын

the PCV at the rear, pass. side

@richsackett3423 Жыл бұрын

@@glasser2819 Thanks!

@georgeokunade2563 Жыл бұрын

Can you please tell me what kind of flexible tool extension to take off the Bolt on Manifold at the back on 2015 ML350 since we do not have enough space to get to it. Thank you.

@svarbo Жыл бұрын

Those are NOT single-use clamps at the connection of throttle body and airbox. You just need the correct tool to put them back on.

@benstr8156 Жыл бұрын

You mean the steel ring clamp? I did it using fat nose pliers. Push the clamp together using fingers, apply pliers and pull down toward you. Be gentle, it will snap in place. Saves you getting another custom tool.

@tommyloan Жыл бұрын

I just replaced the coil for #3 cylinder. I tripple checked, when putting on the spark plug boot from the coil, it did NOT click, like old school spark plug wires did. Is that normal, no click? It just sits on top of the spark plug? It runs and drives perfectly, just surprised there’s no positive engagement.

@bishtadityasingh Жыл бұрын

Can we get a video for replacing valve cover gaskets on M276

@wafaalmasri2891 Жыл бұрын

can someone point out where the camshaft sensors are in this video? I'm trying to replace mine but can't locate which one in Bank 2 (Driver side).

@bigcarmbino3174 4 ай бұрын

Can you do a video of the modern M256 engine spark plug change? GLE 450?

@Frank-bg6xz 8 ай бұрын

I want to add to this, the plugs should be Genuine Mercedes because this engine is direct injected, and the factory plugs guarantee proper indexing. To further ensure the electrode is indexed properly, the plugs must also be correctly torqued to specification. MB StarTuned makes it very clear that improper indexing can lead to performance issues and potential engine damage.

@user-xq6fp2bz7s 6 ай бұрын

Looking for the part number for the circular coil connector. I had a latch break on one when removing. Cant find any information onthis part.

@joseraulsanchezgonzalez2728 2 жыл бұрын

hello I need your help with the location of the camshaft bank 1 sensor sensor 1 my mercedes is a r 350 2012 what is the location of bank 1 the one on the right or the left thank you very much for your help

@bmapes87 3 ай бұрын

Is the spark plug remover tool proprietary from MB or can any swivel removal tool work?

@arte1989 Жыл бұрын

Same for GLK350 2013-2015

@fcpeuro Жыл бұрын

Thanks, Ar!

@jupapri 2 жыл бұрын

All of the m276 content is for the non turbocharged version. Please try to put some content on the twin turbo m276

@fcpeuro 2 жыл бұрын

We can certainly work on that!

@aliislam580 2 жыл бұрын

Can you guys also use this opportunity to clean the carbon off the intake valves? Since the manifold is already off

@fcpeuro 2 жыл бұрын

That is certainly something we can visit!

@christianacosta3776 2 жыл бұрын

Same. Would love to know if that's even possible. You've earned a new subscriber.

@AeroRamer Жыл бұрын

Few questions: 1. Is it completely necessary to remove the Intake Manifold to be able to remove the coils? 2. If you only have one bad coil, why go through the expense of replacing all the coils? Don't coils unusually work until they fail? Meaning that there is no in between. Old or new coils can fail at any time.

@iracecrappycars Жыл бұрын

How is this possible on a 2017 GLE. The rear E10 bolts on the manifold are blocked by the firewall, literally impossible to get a tool in there.

@deez6686 Жыл бұрын

Can show us how to remove crank pulley

@darwinsimmons1 6 ай бұрын

This video makes me want to save the $570 the dealer wants to do it!

@albertogarcia6332 2 жыл бұрын

At what mileage is this service being done? 2012 E350 owner. Owner's manual says to do the plugs at 60k Miles.

@fcpeuro Жыл бұрын

Hi Alberto, 60k intervals are correct! Mike mentions the vehicle behind him had just over 100k miles, so it was past due.

@michaelfrey2357 Жыл бұрын

Don't the plugs need to be indexed as per your website instructions ?

@peterosullivan5611 2 жыл бұрын

Neither of the KITS provides the Throttle Body Gasket part. Anyone know which one it is? The FCP Euro is providing 3 choices and they all have a slightly different description.

@fcpeuro 2 жыл бұрын

Hi Peter, sorry for that! The gasket we had for this model is part number 0209972945. You should have a few options available to you on the site.

@ccfaes75 Жыл бұрын

Is the 14mm 3/8" deep drive socket used to remove the plugs a special socket designed specifically for removing plugs or will any deep drive socket work?

@fcpeuro Жыл бұрын

The one we used is explicitly designed for plug removal; you can use a regular deep drive socket, however, you will need an alternative tool to pull out the old plugs and drop in the new plugs.

@ccfaes75 Жыл бұрын

@@fcpeuro Yes I see that now as I was able to find that exact socket by looking up the make and P/N on Amazon. I didn't realize from watching the video that it was a specialized spark plug socket. Thank you!

@michaelfrey2357 Жыл бұрын

@FCP Euro don't the plugs have to be indexed per instructions on your site ?

@michaelfrey2357 Жыл бұрын

@FCP Euro don't the plugs have to be indexed per instructions on your site ?

@michaelfrey2357 Жыл бұрын

@FCP Euro don't the plugs have to be indexed per instructions on your site ?

@arlokkkk Жыл бұрын

Is the 2015 c400 motor the same?

@jz2639 Жыл бұрын

Could you please tell me the name of that valve that you conected the small vacuum hose into using the pointy pliers?

@fcpeuro Жыл бұрын

Hi J Z, that line is going to the vacuum pump on the engine.

@jz2639 Жыл бұрын

@@fcpeuro Thank you

@PatrickJRoland Жыл бұрын

Which one is coil number 4?

@marcusjohnson1015 5 ай бұрын

Do you have one of this engines valve cover seal/gasket replacement?

@fcpeuro 4 ай бұрын

We do, head over to FCPEuro.com to see what is available for your specific model!

@GuntherSnaps 2 жыл бұрын

8:14 - i broke the little sensor. what is that part called?? anyone?

@Maybachdreaming_ 8 ай бұрын

I followed the tutorial, changed spark plugs and, & now it’s super rough on start up and struggles to stay on. Any suggestions?

@fcpeuro 8 ай бұрын

Be sure to look over your work, and ensure the manifold gaskets were not pinched or moved out of place by accident on installation. Sounds like you have a big air leak somewhere. Best of luck!