On my w201 with the 13mm bar the torque specs are the following: Bar to frame: 20Nm Link to bar:30 Nm Link to control arm: 20Nm Ps if that doesnt cure the clunk have a look at the ball joint bushing for the spring link at the wheel carrier, those go out all the time on the 5 link cars.

I took mine off while replacing all the control arms. Then, I was like, which way does that go back in? Now I see how it goes. Thank you.

I think putting the split of the bush facing down is a really good idea all the forces are coming from the road so this way the force is not hitting into a split its hitting a solid back of the bush

Absolutely awesome editing and in frame shots. Well done buddy your way better than Chris Fix . 👍

Perfect job Jonathan! I like the E Torx wrench trick!

great vid bro

This was a great video. Very easy to follow and engaging.

Excellent video. Thanks so much. Im ready now to do it myself

Great job, Start to finish!

I guess I wrongly assumed these were in the category of final tightening when wheels are on the ground, so clamped bushings don't twist much when load is applied. On the other hand I can see why it shouldn't matter much for a sway bar, when both wheels are under the same load. The whole bar rotates when lower control arms swing up, left equals right, and it's designed to rotate normally. Trying to crawl underneath when off the stands would not be easy, even with ramps.

GREAT VIDEO MAN

Great editing

Great video 📹 👍🏼

Nice vid I have a c240 and I know how it is

Awesome video, I have a clunking on my 2008 CLK from the rear, can’t find a video specific to that car but I’ve found this era C class are similar in a lot of ways

3 years later but here is an updated info on the torque values: W203 W209 Nut, link to bar Nm/ft·lb 40/30 40/30 Bolt, link to wheel carrier Nm/ft·lb 40/30 50/37 Bolt, bracket to bar bracket Nm/ft·lb 30/22 30/22 And according to Mecedes grease or antifriction agent should not be used.

Bro that brush is done for! Retire that thing asap!😁😂

How much wud u charge to do this

Do you have 1 of those wheel hangers for putting the tires back on?

Was there actually anything wrong with those bushes ? They appeared to be fine ? Or did u change them for the sake to changing them ? Ive tried to find polyurethane bushes but nobody appears to make the rear ones ??

Hey mate, Im wondering, i have a T Modell w203, and when its early in the morning, or cold, or rainy, i have a rattling, knocking noise , its kinda like plastic resonating or something like that, so these noises coming from the right rear wheels, i was thinking, is it could be the sway bar brushes? Or what do you think? Thanks for your answer ! Have a good one !

does it make noises? or how did you know when its bad? thanks

On the w202. I think they are plastic. Not sure how that makes sense

🍻🍺😩lo qué pasa cuándo uno está borracho😩

I was very confused at the beginning. I didn't recognize you with the beard, I thought you had some help! Lol

I'm a mog,half man half dog,I'm my own best friend😂👍

1:59 - Please dont walk by and kick my nuts..

Don't you hate working on German cars? I can tell you I don't like them personally. They always have weird nuts and bolts and fasteners that require special sockets and tools. Then they always have to make shit more complicated than it needs to be.