Mercedes Vito Van W639 OM646 How To Replace The Water Pump, Thermostat and Drive Belt Pulleys Guide
Рет қаралды 8,201
4 ай бұрынHere's how to replace a water pump on your Mercedes Vito 2009 Van 111 CDI W639 OM646 engine including the thermostat, drive belt pulleys. In this video the front bumper has also been removed which you may find useful for other jobs, also included are the tools needed.
We have made several how-to videos on the van, see this playlist: • Mercedes Vito
Thanks for watching and if you have questions or anything to add please write it in the comments below.
#mercedesvito #w639 #om646
@wernerkasselman3472 Ай бұрын
Thank you so much for the detailed video! Especially saying what tools and sizes are needed.
@DanielJohnHowTo Ай бұрын
Glad it was helpful!
@spennyhammer4973 2 ай бұрын
Stripped mine down today. Took me less then 1 hour to strip it.
@georgikirov9910 Ай бұрын
What is the bolt size of crank pulley ? Want to spin the belt by hand
@mickramo498 4 ай бұрын
massive help
@DominikSłomba-h1m 11 күн бұрын
Visco new ?
@NaprawySerwisMotoryzacja 3 ай бұрын
did you use the old metal gasket again ?
@DanielJohnHowTo 3 ай бұрын
for the water pump the surfaces were thoroughly cleaned and a new gasket was applied, don't recommend reusing gaskets etc.
@herve5784 17 күн бұрын
Beaucoup d'huile dans le turbo. J'ai du mal a croire qu'il faille enlever tout ça pour faire lrs courroies ou une simple pompe à eau
@seandoyle4671 4 ай бұрын
Dreading I just need connector off
Daniel&John
Рет қаралды 13 М.
Daniel&John
Рет қаралды 8 М.
Daniel&John
Рет қаралды 1,6 М.
MBOwnersClub
Рет қаралды 100 М.
YOUCANIC
Рет қаралды 70 М.
CitroMan
Рет қаралды 70 М.
Латыш Моя Фамилия
Рет қаралды 796 М.