Metal Lathe [Restoration]

Metal Lathe [Restoration] - 1930s RANDA

Рет қаралды 228,195

Жыл бұрын

In this video i'm restoring old Metal Lathe Randa from 1930s
I bought this lathe couple years ago and finally had opportunity to bring this beauty back to use.
This machine has some signs of damage and repairs but fortunately it was possible to make it run again.
Paint work was awful and there was allot of holes and imperfections left from casting process.
I did try electro plating for the first time and i love it.
This project took me way longer than expected but i'm very happy from results.
Let me know in comments what do you think about this Restoration
Thanks for watching
Please like comment and subscribe to my channel.
See u on the next one
#restoration #restorationvideos #asmr

Пікірлер: 188

@richardsims1805 2 күн бұрын

Beautiful work to restore this old tool room lathe. Well done.

@amateur_watchmaker Жыл бұрын

Anyone who saves an old machine like this deserves a thumbs up

@MatthewMoustache Жыл бұрын

Thank you very much Karol 👊

@LilMissMurder3409 4 ай бұрын

What a beautiful little machine. I'm always so jealous of people who manage to find them for sale.

@jorgefsanchezmarin Жыл бұрын

Bella y formidable restauración de esta herramienta de casi 100 años de antigüedad!!.😊. Recibe mis saludos y respetos desde Irapuato GTO - MÉXICO.

@RestorationVideo Жыл бұрын

That turned out absolutely gorgeous, dude! A fantastic piece to use for years to come! Please keep up this excellent work and videography! You are doing a fantastic job! 🍻🤘💜

@MatthewMoustache Жыл бұрын

Cheers buddy 👊😁 I'm glad you like it 👌🍻

@A.J.Collins Жыл бұрын

That was a big undertaking. You did a great job! God's peace to you and your family.

@MatthewMoustache Жыл бұрын

Thanks allot man 👍God's blessing to you and your family 😌

@jt9498 Жыл бұрын

Beautiful restoration on a great lathe! I can only wish for one of those!

@MatthewMoustache Жыл бұрын

Thanks allot J T 👍 was lucky to buy it cheap

@olukayodeokunowo4631 2 ай бұрын

Great restoration. This lathe machine can last for ever if maintained regularly. Well nade lathe machine. More grease to your elbow.

@dzmitry195 Жыл бұрын

Of course you are great. But the restoration of a lathe is impossible without checking and restoring the geometry of the guide surfaces.

@MatthewMoustache Жыл бұрын

Thanks for letting me know i will make a research on how to do it in correct way and check it 👍

@wop60 Жыл бұрын

you mean rectify the shelves?

@dalebechtel8904 9 ай бұрын

@@MatthewMoustachelove your willingness to take constructive criticism and find a solution

@MackenzieForge Жыл бұрын

I love seeing antique equipment being brought back to life.

@MatthewMoustache Жыл бұрын

The best part of restoration is using them instead putting on display

@MackenzieForge Жыл бұрын

@@MatthewMoustache I agree with that, I've got some old woodworking tools I need to fix up and I've got an old forge blower I need to restore as well.

@MatthewMoustache Жыл бұрын

@Mackenzie Forge sounds like couple nice projects 👍

@Cradley684 Жыл бұрын

Excellent work friend, great restoraton have a nice day !!!. Brian UK.👍👍😀😀.

@MatthewMoustache Жыл бұрын

Cheers Brian 🍻 greetings from medway 😁

@piotrjankiewicz1335 10 ай бұрын

Beauty, and green suits her face :) Modern machines don't have that breath of cold, cast steel anymore, they do the job but something is missing :) Regards, good job.

@MatthewMoustache 10 ай бұрын

Thanks allot Piotrze 😁 that's why i love old tool's and machines 👌 pozdrawiam 👍

@DavidHerscher Жыл бұрын

What a lovely little machine. Looks like a cross between a small Hardinge, and a south bend workshop lathe. Side note; ought to replace that lead screw and half nut. Looks like a LOT of wear on those.

@MatthewMoustache Жыл бұрын

Thanks David 👍 the half nut seen a better time's that's for sure, and thanks for pointing that 👍

@georgebrown8312 Жыл бұрын

Magnificent job you did restoring that lathe. It looks much better and it works like a charm too. Excellent work as usual, particularly after putting in a whole lot of hard work.

@MatthewMoustache Жыл бұрын

Thank you very much George 😁 appreciate your kind words 👌

@cedricathlan9399 Жыл бұрын

Nice piece of machinery! Bit of advice for the future, though: do not sandblast precision machined parts or the frames of precision machines. Sandblasting can induce surface stress on the parts and throw them out of whack. 1 or 2 thousands of an inch doesn't matter if it's a old hand drill you're restoring, but it matters when it's a lathe you plan to make accurate cuts on :)

@fna-wrightengineering Жыл бұрын

It can be blasted, but you need to use plastic media. Plastic bead blasting will strip the paint, but won't affect the underlying metal.

@martytoal6547 2 ай бұрын

Why not oil the parts on reassembly ? Looks a great job👍🏻

@danielapicella6907 Жыл бұрын

Es una verdadera joya mecánica. Tiene un estado impecable. Le envío un cordial saludo y mis sinceras Felicitaciones . Desde la Ciudad de Buenos Aires Argentina.

@AncientAudiophile Жыл бұрын

Very nice restoration! One hint for the future - these big flat head screws are not designed to be opened with standard flat head screw drivers. These need a head that is straight, not angled. For to his kind of tool, please check "Drag Link Socket".

@MatthewMoustache Жыл бұрын

Thanks man 👍 great tip I'll definitely get them 👊 appreciate that

@rickpalechuk4411 Жыл бұрын

Turned out wonderful! Look forward to seeing it in use in future vids. Cheers

@MatthewMoustache Жыл бұрын

Thanks Rick 👍 I'm excited to learn and and expand my possibilities 👊

@williamstyers4264 Жыл бұрын

Good job!! However as a retired Master Machinist I couldn't help but notice the absence of a thread dial. Not having this would make accurate thread cutting extremely difficult if not downright impossible. Just curious if there was one missing or if there never was one?

@MatthewMoustache Жыл бұрын

Thank you William 👍 this is how i got it so it might be missing and I'm new to using metal lathe so thanks for letting me know 😀 I'll be learning how to use it but definitely this will increase my ability and skills

@billjulian9496 Жыл бұрын

I am very impressed with the results, your lathe came out very nice.

@MatthewMoustache Жыл бұрын

Thank you Bill 👍

@CoolAgainRestoration Жыл бұрын

This video was awesome to watch mate 👍 nice job you did

@MatthewMoustache Жыл бұрын

Thanks allot brother 👊 I'm glad you like it 😀

@duncanandrews1940 Жыл бұрын

Having just acquired my very first lathe-a RANDA which needs a lot of TLC I found this very interesting, thank you, I am 73 and although DIY savvy, this is my first ever lathe so I hope I can find someone prepared to answer stupid questions !!

@MatthewMoustache Жыл бұрын

You can ask me 😁 and I'll try my best to answer

@duncanandrews1940 11 ай бұрын

@@MatthewMoustache Well now I have it and will be taking it home to France. Should be home in a week. It seems to me that the first thing is to clean as much crud off it as possible so a hand car wash with hot soapy water might be the first step? It will certainly need a motor and a flat and V belt.

@MatthewMoustache 11 ай бұрын

@duncanandrews1940 nice 👌, you can try with pressure washer for sure just make sure you will work on it since that to prevent more rust build up, motor can be runned through vfd drive to easy adjust speed 😉

@duncanandrews1940 11 ай бұрын

@@MatthewMoustache Car washed it today and will start to dismantle it for finer cleaning. Not much rust on it anywhere. Using Ballistol as a rust prevention liquid. Because I live in France all the accessories here are metric. As this is a 1930's machine what tread(s) should I expect to find on it? ( Oil Cups etc., )

@MatthewMoustache 11 ай бұрын

@duncanandrews1940 nice one buddy, you need to check them manually or try to make some research on your exact model, if it's made for Europe maybe metric but it's hard to say without seeing it.

@DaveGDesigns Жыл бұрын

Wow I’ve been waiting for this video and it was worth the wait I love it mate and you are building up a nice collection of tools now 👍🏻

@MatthewMoustache Жыл бұрын

Appreciate that mate 😁 now I need to visit you and cast some brass 😉

@tadeuszczerwinski3982 Жыл бұрын

@MatthewMoustache Жыл бұрын

@@tadeuszczerwinski3982 daj cały komentarz Tadeusz, pozdrawiam 💪

@admoh9681 Жыл бұрын

It's amazing restoration

@MatthewMoustache Жыл бұрын

Thanks allot mate 👊

@VenturiLife Жыл бұрын

Wonderful restoration job.

@MatthewMoustache Жыл бұрын

Thanks allot mate 👍

@renatomedina6595 Жыл бұрын

Serviço perfeito

@danielespinoza1939 Жыл бұрын

Beautiful lathe really beautiful!!!!

@MatthewMoustache Жыл бұрын

Thank you Daniel 👍

@PersMachinist 9 ай бұрын

Very acurate restoration...

@MatthewMoustache 9 ай бұрын

Thank you 👍

@MASI_forging Жыл бұрын

Great restoration. You did a nice job. 👍👍

@MatthewMoustache Жыл бұрын

Thanks Masi 👊😁

@larrykelly2838 Жыл бұрын

Nice restoration, nice machine.

@MatthewMoustache Жыл бұрын

Thanks man 👍

@jamescraig5421 Жыл бұрын

A totally new Lease on Life.Nice One Bro.👍

@MatthewMoustache Жыл бұрын

Thanks allot James 👍

@djhscorp Жыл бұрын

Lovely job, I Had an old Myford that was very similar to this.

@MatthewMoustache Жыл бұрын

Thank you 👍 Myford would be more difficult to restore i guess 😁

@JiggsysShed Жыл бұрын

Wow, that is an awesome restoration mate! Not a small undertaking

@MatthewMoustache Жыл бұрын

Cheers mate 👍 appreciate that 😁

@jamespayne8781 Жыл бұрын

Seems like a well built little lathe.

@MatthewMoustache Жыл бұрын

Indeed James, no flimsy parts and planed by engineers without computers 👌

@kizlok73 Жыл бұрын

No i pięknie, super robota, myślę że będzie służyć długo i stworzy sporo ... pozdrowienia 👍🥳 cheers 🍻

@MatthewMoustache Жыл бұрын

Dzięki Tomasz, wyzwanie było zacne 😁 teraz trzeba sie uczyć jak tym operować 😅 pozdro 🍻

@kingsley2565 7 ай бұрын

Just Beautiful

@MatthewMoustache 7 ай бұрын

Thank you 👍

@rbyaldrzee6657 Жыл бұрын

😍Beatiful 👍

@MatthewMoustache Жыл бұрын

Thank you 👍😁

@user-sh5mv5tu5q 6 ай бұрын

Отлично !!!! С уважением старинный токарь !!!!

@user-og2td1rz7p 10 ай бұрын

Замечательная работа 👍

@user-mb4qp9kb3u 8 ай бұрын

Только есть один нюанс. Это не реставрация, это марафет. Станок просто стал красивей, и всё. Настоящая реставрация подразумевает восстановление заводской геометрии и параметров. А тут НИ ОДНОГО контрольного замера и ниодной восстановленной поверхности. Только чистка и смазка.

@albumdememorias 9 ай бұрын

Excelent job man! Congratulations.

@MatthewMoustache 9 ай бұрын

Thank you very much 👊

@gassereric 10 ай бұрын

Mon Boley 4L est de 1927, une merveille

@Corialtavi Жыл бұрын

Great Job, Gives me inspiration for when I get around to my Drumond one day.

@MatthewMoustache Жыл бұрын

Thanks man 👍 I'm happy to hear that 😀

@whittysworkshop982 11 ай бұрын

Love old machines like this 😁 with a small light lathe ya want to bolt it down tight to somethin solid and heavy....... Youll get much better cuts and a better finish. After that the lathe needs to be "leveled"...... this doesnt mean actually makin the ways level, it means removing any twist from the ways, twisted ways will show up as a taper on what youre cuttin; tho a short lathe makin small parts it wont matter as much. Lots of videos about lathe leveling, I suggest This Old Tonys video, its both helpful and funny 😁

@MatthewMoustache 11 ай бұрын

Thanks mate 👊 good tip is always much appreciated 😁👍

@alexomargodoytorres-fg9yu Жыл бұрын

Que buena la enseñanza de estos motores celecradese

@Phil197 Жыл бұрын

Very cool

@MatthewMoustache Жыл бұрын

Thank you 👍

@davidkfreeman6107 Жыл бұрын

Just Subbed. Great job. very relaxing.

@MatthewMoustache Жыл бұрын

Thank you very much David 👍appreciate it 😁

@ReclaimDesign Жыл бұрын

Well done on your getting almost to 20k Matthew! Now you are 1 closer 😅

@MatthewMoustache Жыл бұрын

Thanks allot 👊😁 one at a time that's all I need 😉🍻

@lancestancliffe4885 Жыл бұрын

I quite like your restoration. I have a Tyzack ZYTO with a date of 1954 ? It's basically the same lathe only mine has a bigger lathe bed. Your rebuild didn't show any alignment though for the headstock and tailstock !!! But a very good refurbished little lathe ready for another X amount of years.

@MatthewMoustache Жыл бұрын

Thanks Lance 👍 I did it off the scene as I'm new to metal lathes and don't have too much knowledge, but for sure it will serve another year's

@jtreg 4 ай бұрын

excellent video. I have an R and A with 6 bolts to secure the bed, i think mine has a longer bed but I bought it without the left hand support for the gears, still, its useful. I had to get an adapter plate and a chuck plus a sewing machine motor to run it! Would love to get a casted copy of that bracket! (I have the gears...) Please PM me if you can help...

@MatthewMoustache 4 ай бұрын

Thank you very much, i can try to help if you find me on the other social media as it will be easier to have discussion 👍 moustache workshop on Instagram or fb

@RustyBoyCrafts Жыл бұрын

Nice Restoration !

@MatthewMoustache Жыл бұрын

Cheers buddy 😁👊

@RustyBoyCrafts Жыл бұрын

@@MatthewMoustache 🍻

@MatthewMoustache Жыл бұрын

@@RustyBoyCrafts 😁🍻

@amirheydari2871 10 ай бұрын

Very good

@MatthewMoustache 10 ай бұрын

Thank you 👍

@mattd8668 Жыл бұрын

Tres bien !

@MatthewMoustache Жыл бұрын

Thank you very much 👊 😁

@Rheasound Жыл бұрын

Is the read bearing welded after crack? Nice cleaning and painting.

@chris-su8ns Жыл бұрын

Nice work. But please don't sandblast guide surfaces, that will ruin them. A drop of oil here and there wouldn't have hurt during assembly. The scale rings made of plastic are guaranteed not to be original, to make new ones you need a milling machine with a dividing apparatus.

@MatthewMoustache Жыл бұрын

Thank you very much for your input 👍 most of them were covered with tape, i did use machine wax for protection and smooth running, I'm new to such an machines but lesson learnt 👍

@hhhobby Жыл бұрын

Fajna tokarka. Jest może niewielka, ale widzę w niej duży potencjał. Jeżeli ma pełny zestaw kół zębatych to można na niej zrobić każdy standardowy gwint. Możliwość skręcenia konika w bok też czasem się przydaje. Zostaje tylko życzyć dobrej zabawy. 👍😃

@MatthewMoustache Жыл бұрын

Dzięki napewno zabawy i nauki nie braknie 😁 dodatkowe koła zębate postaram się gdzieś wyszukać za cene burgera 😅

@hhhobby Жыл бұрын

@@MatthewMoustache warto poświęcić jeden wieczór i policzyć najczęściej potrzebne przełożenia do gwintów metrycznych i calowych. Taka ściągawka przy tokarce na pewno będzie pomocna. Sam w pracy stosuję system ściągawek, żeby nie liczyć w kółko tego samego.

@user-nk7fy9xz3c 6 ай бұрын

Молодец 👍

@user-dt4mr7lb2e Ай бұрын

Винт под шестигранник в станке 30х годов?

@jacquespedersen3011 Жыл бұрын

Magnifique 👍👏

@MatthewMoustache Жыл бұрын

Thank you 👍😁

@billygragg218 10 ай бұрын

Great job and a heavy made little lathe

@illuminant1129 9 ай бұрын

165 - 167 Bishopsgate. I am not sure what they are doing down there now. But it is not Lathes. Great job.

@MatthewMoustache 9 ай бұрын

Thank you 👍

@orange010 Жыл бұрын

💖💖💖

@justblairthompson Жыл бұрын

I bought a Randa lathe just a couple of weeks ago. So this was a timely video for me. Not sure what mine is, but it does not have a Randa name plate, instead the casting is stamped Ross & Alexander Ltd "Randa" Still coming to terms with the thing. Think I am getting too much play in the headstock. Did you need to replace the bronze bushings in yours?

@MatthewMoustache Жыл бұрын

Surprisingly bushings on my one were okay and didn't had to much use i guess (fairly good condition). Your might be older. I hope you will find this video useful 👍

@justblairthompson Жыл бұрын

@@MatthewMoustache I am going to play around a bit with mine first, then strip it down and try and work out where the play is coming from. Mine also came with a 3 phase motor and VFD. The VFD I realised yesterday is programmable and also has a number of terminals so I can add extra switches to it. Going to be playing with that tonight

Жыл бұрын

8:40 Man, cast bodies should not be grinded because the original texture is lost. Anyway, great job! You brought it back to live

@MatthewMoustache Жыл бұрын

I remove only imperfections left after casting process as they were not cleared in factory.

@chris-su8ns Жыл бұрын

Not necessarily. This is a small, inexpensive hobby machine, so savings were made on such complex work during production. At my workplace there is still an old milling machine from the 1960s, which was also processed in the factory at the time, i.e. sanded, filled and painted in several layers.

@georgedistel1203 Жыл бұрын

Nice old lathe , what was the runout on that part. Watching you almost made me want to try that. Do you have any recommendations as to which lathes that aren't worth restoring.

@MatthewMoustache Жыл бұрын

Thanks George, if you talk about that small brass part (oil wick feeder) there's cap missing and broken fixing point for the cap. My recommendation hmm as long as you don't need buying half of the parts it's worth it or if you can't make some of the parts i would pass

@georgedistel1203 Жыл бұрын

@Matthew Moustache yeah I'm just conflicted between buying a new one "probably with plastic gears and made in china" or buying one made in USA even being an older one. Just wanting something for occasional use in hobbies

@MatthewMoustache Жыл бұрын

@George Distel well i heard about cheap Chinese lathes they might have problems with plastic gear's, but i bet you can find decent second hand on fb market

@tinaliebe5118 Жыл бұрын

Great restoration did you replace the main bearings or did you leave the original ones thanks ❤

@MatthewMoustache Жыл бұрын

Thanks Tina 😁 the original were still in good shape 👍

@tinaliebe5118 Жыл бұрын

@@MatthewMoustache cheers thanks 💖

@stevehuffman7453 8 ай бұрын

Safe to presume you chased all the threads off camera? As easy as the bolts and nuts went on, you must have. Did you level and plumb the machined surfaces to ensure they are the same height and flat to each other? Dependng oon how much use it has seen, and the maintenance, the machined surfaces could be worn down a little, giving idiosycricies to work with/over come to get an accurate part. The chuck and tail stock off a couple thousandths of being centered, for example.

@MatthewMoustache 8 ай бұрын

Yes i did few operations off camera, this machine is my entry level for understanding how it's working and how to learn basics etc. Still didn't find the right place for this lathe, once I'll do it I definitely invite one of my friends who got the right knowledge and help me with all what you mentioned. Thanks for pointing crucial things 👍

@micmike Жыл бұрын

That was cool, maybe figureout how to change out the chain for a belt and save your ears and sanity

@MatthewMoustache Жыл бұрын

Thanks man 👍 it's actually an old link belt and all gears creates the most of the noise. I will try to reduce it somehow 🤔

@toxsspox Жыл бұрын

👍🏼

@raymondfox1444 Жыл бұрын

This is the same lathe as a Zyto with a different badge. Have a look on Anchor designs he restored my zyto 2 years ago.

@MatthewMoustache Жыл бұрын

I will have a look 😁 thanks

@Saber_Matrix Жыл бұрын

👍💯

@MatthewMoustache Жыл бұрын

😁👊

@AlainStar Жыл бұрын

🙏👏👍💪

@johnrevill1087 Жыл бұрын

If you don't mind me asking how long did it take from start too finish

@MatthewMoustache Жыл бұрын

I think somewhere between 30 35 hours

@volkmarkostka6763 Жыл бұрын

How long took that puzzle?🤪

@MatthewMoustache Жыл бұрын

Good couple hours 😅

@Urantia-1411 Жыл бұрын

Show

@MatthewMoustache Жыл бұрын

Thank you SEM 👍

@francescopaoloprestigiacom3852 5 ай бұрын

29:15

@rodosuarez5234 Жыл бұрын

Me interesa

@maikl6920 Жыл бұрын

собрал всё почти без смазки - профан... и даже латунь точит коряво...

@user-ek3hj7ls9v 10 ай бұрын

Не понять какого года этот станок? в 30 годах не было ключей с 6 гранями были квадраты разных калибров

@damarcastro768 Жыл бұрын

👍👍👍🇧🇷

@MatthewMoustache Жыл бұрын

👊😁👍

@renedufaux6141 Жыл бұрын

c'eut un beau travail de nettoyage et de peinture mais pas une restauration ,les queues d'aigle du coulisseau et des chariots n'ont pas été ajustées pour compenser l'usure ¨¨

@AJVAN_ Жыл бұрын

1930 and it has plastic dials? Unusual.

@MatthewMoustache Жыл бұрын

These plastic dials were added by someone as markings on them are done with knife and shaking hand i believe 😅 that will be one of the first thing I'll be changing

@jean3xyz 11 ай бұрын

How much?

@thepagan5432 11 ай бұрын

It looks good, but you missed so many aspects of restoring precision machinery. Proper slide restoration and adjustment. Having the right tools; dial indicators, feeler gauges etc. The chuck was not properly lubricated on the scroll or bevel gears. Proper general lubrication, the list goes on. They are plenty of good restoration posts on KZfaq, if you want to learn the right way, watch them, and your posts will not meet such negative comments by professional engineers.

@MatthewMoustache 11 ай бұрын

Appreciate your input 👌 I'm not an engineer as you can see 🤷‍♂️ there's nothing negative in your comment just a knowledge about proper way of doing it 👍

@thepagan5432 11 ай бұрын

@MatthewMoustache Thank you, I spent all my working life as an engineer with over 35 years in the gear/gearbox industry. I was the guy that was sent to repair, modify, offer assistance to customers all over the world. I've stripped and rebuilt so many gearboxes that it was 2nd nature. Good luck and happy restoring.

@Mr666samuel666 Жыл бұрын

Помыть и покрасить, это не реставрация станка, это только визуально красоту навести. Чтобы станок работал необходимо все направляющие и привалочные поверхности приводить в порядок

@kander3634 Жыл бұрын

развелось рестовраторов ,а как хвалят ,во что привратился мир ,или люди рукожопые

@Mr666samuel666 Жыл бұрын

@@kander3634 тренды ))))

@raystevens687 27 күн бұрын

So if that lathe is from the 1930 how come you have plastic parts on the lathe.

@MatthewMoustache 27 күн бұрын

That's because someone add them to this lathe, as they look handmade

@jimmeh213 Жыл бұрын

Had to watch it on x2 speed

@MatthewMoustache Жыл бұрын

I know it's a long video and I tried to show everything that's necessary 🤷‍♂️

@user-kp3vf1nn5m Жыл бұрын

那麽老的車床整修後也不太好用吧!

@jaycoulter1792 Жыл бұрын

So stripping paint, body filler and new paint is a rebuild???

@MatthewMoustache Жыл бұрын

Properly cleaned, rust removed, fully disassembled, new paint, adjusting all moving parts, make sure it's working, i think it's called restoration.

@victormuckleston Жыл бұрын

is it straight, does it cut parrallel. more to restoring alathe than a new coat of paint and wd40.

@MatthewMoustache Жыл бұрын

@Victor Muckleston few uses and I will know

@altair1nur107 5 ай бұрын

Маточная гайка стёрта почти в ноль, герметрия тоже под вопросом. Смысл в такой "реставрации" отсутствует, если только как экспонат на полку поставить

@PyroFalcon Жыл бұрын

I wouldn't call it a restoration, I'd call it a service.

@5barkerstreet Жыл бұрын

i wish i had that baby

@MatthewMoustache Жыл бұрын

Keep looking Paul I'm sure you will find it 👊

@user-qz1zb2qm5t Жыл бұрын

дааа!!!!!! умели делать в 30-х а вот для чего ниша в станине перед бабкой вопрос универсальности добавляли механизм привода на цепи ето тоже вопрос малая продольная с одним ухом крепления вобщем загадки истории!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@Korneliy_Shnaps Жыл бұрын

Люфты, посадки, геометрия - это всё для слабаков. Краска из балончика устранит все проблемы.

@kander3634 Жыл бұрын

это что было ,покраска , развелось рестовраторов которые понятия не имеют что такое рестоврация

@user-jg6zz2ms5l 9 ай бұрын

Разобрал,помыл,собрал. Шляпа!👎

@demon.d 2 ай бұрын

Niewiele tej restauracji, wszystko na pokaz byle ktoś oglądał. Po co te dziwne narzędzia typu przedwojenny klucz nastawny, albo krótki wkrętak? I w dodatku kto polewa odrdzewiaczem łeb śruby? Smaruje się gwint, a nie łeb. Za to like nie dostaniesz ode mnie.