Whatever this thing is, I'm crazy about it. I've loved it since I was little and I've always wanted to buy one.
@ianday3812 күн бұрын
I've just picked up a Zyto lathe which is pretty much identical. Mine is in fairly reasonable working condition so I'm doing a bit of a rolling restoration. I've just replaced the original tool holder with a modern quick change type which has made a big improvement. I got one of the super cheap ones from eBay but it seems to work ok so far. If you do the same you'll need a 2.75" 3/8 whitworth bolt to replace the original stud Your video has been very useful, good work 👍
@ianday3812 күн бұрын
Just looking again, it looks like your tool post has been modified with a piece of leadscrew which is probably much more rigid than the original 3/8 stud.
@simonbernal393422 күн бұрын
Hey Matthew do you also restore other framing machinery?
@MatthewMoustache21 күн бұрын
@simonbernal3934 hi Simon, what kind of machine are we talking
@simonbernal393422 күн бұрын
great video` I have a Morso F that's been garage stored for five years. its a 39 year old machine which was in perfect condition but now even though covered.., has a fine rust layer on the exposed parts. This has given me the push to strip it and bring it back to the condition it deserves to be in and inspire me to use it. They are a masterpiece of design.
@logotrikes22 күн бұрын
Look at the amount of parts laid out. Amazing how many bits make up a mechanical device...
@6tesGirlАй бұрын
Wow!!
@Rebel9668Ай бұрын
I tried ordering from them a couple days ago using paypal and they still insisted I had to give them my email address before they would complete the transaction...and that ain't happening.
@MurlWatne-io2boАй бұрын
To many open spindles n gearing. Should be covered. Great restoration.
@MatthewMoustacheАй бұрын
Thanks, I have plans to make some nice cover 👍
@marvelman600Ай бұрын
Is this for display only?
@petermaunsell4575Ай бұрын
Beautiful work, does anyone know if the Toy Doctors rocking air pump is a real brand and if so, what is it?
@tonyandjackieholmes9546Ай бұрын
as below great work !
@zzrubenАй бұрын
20:10 😂😂😂 yes, it's a game
@kieranwalsh8037Ай бұрын
I’ve bought some and like you only happy with 50% of them. Coat hooks and drawer pulls are good so are the brass animals. The t track will not fit my table saw.
@zoharflax6363Ай бұрын
Hi, what is the chemical used at 8:30 to darkn the metal pieces? Does that inhibit rust? Thanks!
@MatthewMoustacheАй бұрын
It's called gun blue, it creates oxidation layer on metal and after oiling it's protected against rust
@JonasDieltiensАй бұрын
My man, you have such a nice workshop! :D And a nice collection of hand planes, I see. Great! One day I'll come and visit!
@MatthewMoustacheАй бұрын
Cheers brother 👍 you are more than welcome in my workshop 😁👊
@99forizziАй бұрын
This is a great video thank you very much. I have one of these in storage and was thinking about taking it apart for transport. I think I might go for it now. Great video and the Morso looks like new!
@richardsims1805Ай бұрын
Beautiful work to restore this old tool room lathe. Well done.
@michaelmarks6966Ай бұрын
Would you sell this box? Or make one for my son he is totally amazed how good this came out please let me know thank you
@JesperMakesАй бұрын
❤
@Aiden-zo3upАй бұрын
Pretty cool dude
@MatthewMoustacheАй бұрын
Thanks Aiden
@Aiden-zo3upАй бұрын
@@MatthewMoustache it's Jimmy dude
@DelaneyGillilan-ts4ogАй бұрын
What size rebar is that? #5?
@MatthewMoustacheАй бұрын
I've used 20mm
@Fangs-jo4bq2 ай бұрын
What about the airbrush part on the side.
@grqergegsdf2 ай бұрын
Nice work. Im supprised that you seem to be the only one who make holdfast in such way on yt.
@MatthewMoustache2 ай бұрын
Thanks 👊 it's hard to be original these days 😅
@cliffdoes_stuff40122 ай бұрын
I've just caught up with all the messages in the group and saw you posted the link to this video there. Great video Matthew and the project came out beautifully. 🖖
@mskayla77472 ай бұрын
You, sir, are a master artiste. Excellent work.
@MatthewMoustache2 ай бұрын
Appreciate that Kayla 👍😁
@raystevens6872 ай бұрын
So if that lathe is from the 1930 how come you have plastic parts on the lathe.
@MatthewMoustache2 ай бұрын
That's because someone add them to this lathe, as they look handmade
@SRE8222 ай бұрын
Your videos are amazing! Don't Stop! 💪
@MatthewMoustache2 ай бұрын
Thank you very much Mike 👊 appreciate that 👍
@ianwalls49762 ай бұрын
Great to see you back and what an amazing job thankyou Matthew 👏
@MatthewMoustache2 ай бұрын
Thanks allot Ian 👊 appreciate that you are still here 🙏
@ianwalls49762 ай бұрын
@@MatthewMoustache always will be I love your content it's amazing
@DaveGDesigns2 ай бұрын
Love the front of the drawers mate that wood looked awesome and the walnut handles was a beautiful touch 👌🏻 are you going to makers at the weekend? If so I’ll see you then it’s been a while since we caught up brother👍🏻
@MatthewMoustache2 ай бұрын
Thanks allot brother 👊 unfortunately I need to do some work in my car soo all fund's go there, plus new workshop need to be done very soon
@kizlok732 ай бұрын
Witaj Mati długo cię nie było🤔. Super projekt bardzo mi się podoba szafka, pozdrowionka 😉
@MatthewMoustache2 ай бұрын
Hej Tomasz, no sporo sie dzialo ale jest ok. Dzięki i pozdrawiam 👊
@AlainStar2 ай бұрын
🙏👏👍💪
@A.J.Collins2 ай бұрын
It is great to see you again! I was just thinking the other day, "I wonder what Matthew is up to?" Now I know.
@MatthewMoustache2 ай бұрын
Thank you very much for staying with me 👊 there was some drama in my life over last 2 years but I'm back on track with big plans.
@A.J.Collins2 ай бұрын
@@MatthewMoustache I am sorry to hear that you were going through a rough patch. I pray for peace and success in your future plans.
@tahiragha5452 ай бұрын
after a long time you uploaded video why?
@MatthewMoustache2 ай бұрын
Last two years were very hard to me and that's a long story. But now let's make more content and more project's 👊
@Etrickster2 ай бұрын
Waow now i can repear my woodie toy
@thewoodjunki2 ай бұрын
Thanks for doing the video 👌
@enn1042 ай бұрын
Would you be able to use electrolysis to remove rust on the whole thing? I have the same chopper with some rust and don’t want to take it all apart.
@MatthewMoustache2 ай бұрын
I'm not sure, but you can use some rust remover by soaking rugs in and placed on rusted areas.
@doohandz3 ай бұрын
Something tells me that this is for "display only and if you handle it too much it aint gonna last" (But a very nice video! It looks very accurate to the one in the movie!)
@Bayzhit5103 ай бұрын
How much would u charge to make one for someone?
@MatthewMoustache3 ай бұрын
With today's price of materials it would be around 2k
@MizTereAlous3 ай бұрын
The only thing missing are the side panels on the chest, but thats alright.
@user-dt4mr7lb2e3 ай бұрын
Винт под шестигранник в станке 30х годов?
@marceloassis68873 ай бұрын
Bela faca, parabéns!
@belloa30263 ай бұрын
Can you just leave the EGR on and plug it?
@MatthewMoustache3 ай бұрын
First you need to remapping your engine and then blank it
@belloa30263 ай бұрын
Where did you get the piece of metal from?
@MatthewMoustache3 ай бұрын
I've had piece in my workshop but you can get small piece from ebay or even toolstation for couple pounds
@dougward-ce5mj3 ай бұрын
I love when a craftsman build something that everybody can connect with. Hum I have some cherry veneer? Next project? Now just have to find a woody.
@MatthewMoustache3 ай бұрын
Thanks Doug 👊 and enjoy the build 😉
@dougward-ce5mj3 ай бұрын
What's the dimensions of the case?
@pamelapetrovits56173 ай бұрын
Well done. Reminds me of an accordion-style sewing cabinet
@MatthewMoustache3 ай бұрын
Thank you Pamela 👍
@anthonydelamare86123 ай бұрын
That's soooooooooooooooooooooooooo good!
@jessicaalvis70633 ай бұрын
How is the actual quality of the tongue and Groove bit?😊
@MatthewMoustache3 ай бұрын
Overall looks OK-ish but tongue bit with double cutter was off center so it's dangerous to use 🤷♂️
@jessicaalvis70633 ай бұрын
@@MatthewMoustache okay thank you :)
@olukayodeokunowo46313 ай бұрын
Great restoration. This lathe machine can last for ever if maintained regularly. Well nade lathe machine. More grease to your elbow.
@robertcornelius35143 ай бұрын
That's not very good. It's outstanding!
@MatthewMoustache3 ай бұрын
Thank you very much Robert 👊 😁
@demon.d3 ай бұрын
Niewiele tej restauracji, wszystko na pokaz byle ktoś oglądał. Po co te dziwne narzędzia typu przedwojenny klucz nastawny, albo krótki wkrętak? I w dodatku kto polewa odrdzewiaczem łeb śruby? Smaruje się gwint, a nie łeb. Za to like nie dostaniesz ode mnie.