Metal Shed Roof Support

Metal Shed Roof Support - Upgrade

Рет қаралды 30,512

Жыл бұрын

Today I reinforced my shed roof. It looked like a serious design flaw when I put the shed up. Soon after I built the shed I was driving down my street and I noticed a neighbour had the same shed but his roof looked like a horses saddle. So it's pretty obvious it needs reinforcement...

Пікірлер: 26

@craigm.9070 Жыл бұрын

Really nice sweat equity upgrade to winterize the roof of your shed. Thanks for posting this one!

@Mountain-Man-3000 Жыл бұрын

This is what I had in mind for my same shed. Nice to know it'll be fairly simple. Thanks for the upload.

@charlesfehl1551 Жыл бұрын

Very good shed supports. I have a 10x14 that was a nightmare to put together. Your roof video is great and I'm going to do the same. Took me 3 weeks with grandsons help . Thanks lots. From Ohio

@robsgaragewoodworkin 7 ай бұрын

You’re welcome! Thanks for your comment! Cheers! Rob

@timdodd2966 Жыл бұрын

I took your lead on this project and it worked perfect! Thanks for sharing your idea!

@belindalee4626 9 ай бұрын

Im so glad I stumbled onto your video when I tried to describe this fom my mind the person with the skills couldn't grasp this framing idea. Thank you so much.

@robsgaragewoodworkin 9 ай бұрын

Lol! You’re welcome. I have 3 (ish) videos on the shed if you are interested. 1 for waterproofing the floor and the rest are for strength upgrades for the roof. Good luck with your upgrades!

@12401690kewls Жыл бұрын

Thank you for the video exactly what I needed and super simple.

@SteveBueche1027 Жыл бұрын

Man, I’ve got that same saw! Put that table extension in. You’ll be glad you did.👍🏻

@e20atl 7 ай бұрын

Great video. I just assembled the tin pot shed. Will definitely add some structure. Like your idea..Thanks a lot.

@martindelaney5419 Жыл бұрын

Great video well done for sharing.

@_o.0_. Жыл бұрын

Nice work!!!

@BB.......... Жыл бұрын

I did similar for the roof beams on my Arrow shed, but I used 1x4s since I had a few 8 ft laying around. Not sure how I'm going to tie it all together yet, but your vid gave me some good ideas.

@plasticookies Жыл бұрын

Just the video I was looking for! I'm also unable to find the snow load kit where I am. Thanks!

@dolphinliam888 Жыл бұрын

Nice job. I'm doing similar to an off the shelf shed. I'm building a workshop in a woodland site but first need to beef up my site hut (shed from a home depot type store). Very useful video.

@coachmike3266 Жыл бұрын

How did it go? Im about to buy one of those home depot metal sheds but worried about it not being sturdy enough. Im in south Louisiana so mainly concerned about wind blowing it away. I have a cement slab that I plan on anchoring it to, but do you think the rest would fly apart? Were you able to beef up your shed?

@outofround Жыл бұрын

@@coachmike3266 Here's how I anchored it. I put L bolts in the slab before it set up. But you could drill it and put lag bolts in it. I used two bolts on each side. I secured treated 2x6's to that and then some treated 2x2's on top of that. I secured the building to the 2x2's with about 36 #6 stainless steel screws. Caulked it all up and painted it. Good luck!

@aguilareal6537 Жыл бұрын

Good job 👏🏼 👏🏼👏🏼👏🏼👏🏼

@SeekanDestroy03 11 ай бұрын

Good job 👍 I'm doing something similar for a flimsy Amazon sheet metal shed!

@robsgaragewoodworkin 11 ай бұрын

Thanks! Good luck on your build! Cheers! Rob

@carlos83313 Жыл бұрын

I need to reinforce my shed roof it got old mess up with so much snow this year. One cuestion what is the name of the brackets you used? I probably have to buy them online or hardware store? Thanks in advance for your response. Nice video by the way

@robsgaragewoodworkin Жыл бұрын

You might be interested in this product. GA 3-1/4 inch 18-Gauge Galvanized Gusset Angle www.homedepot.ca/product/simpson-strong-tie-ga-3-1-4-inch-18-gauge-galvanized-gusset-angle/1000146095

@carlos83313 Жыл бұрын

@@robsgaragewoodworkin thank you I will look into that brackets and repair my roof following your steps as soon the whether get a little warmer. Thanks again!

@user-sj4xl4rb4r 11 ай бұрын

Do you have any pictures of how the reinforcing held up with snow on the roof, or verbal feedback after a winter with this mod??? Thanks Ken from the great white north!

@robsgaragewoodworkin 11 ай бұрын

I didn’t take any pictures but it’s still standing unharmed after it’s first winter. I have a neighbour with the same shed and theirs is all beat up, I’m assuming, from years of unreinforced snow load. I was concerned about snow load when I built it and after seeing theirs I came up with this idea.