MF135 Restoration #4 Dismantling the Cylinder Head

Рет қаралды 18,621

Күн бұрын

Removing the 3 cylinder Perkins diesel cylinder head
After removing the head I remove the valves and we have a look at the valves and seats.

Пікірлер: 23

@MATTYANDSMOKE 4 жыл бұрын

GR8 video chum. Excellent camera work. And yes, I much appreciate showing all bolts removed. It's more details, really thorough instructions for me to use on my 1970 MF 40 backhoe. I bought it seized. Got it unseized and rebuilt starter installed. Need to do compression test next. Thanks very much lad.

@BundyBearsShed 4 жыл бұрын

Thankyou.

@camatbattler2233 5 жыл бұрын

G'Day Lance, if I ever wanted to see a bloke in his element, this is it. Really like the commentary, very interesting. Looking forward to this series. Cam

@BundyBearsShed 5 жыл бұрын

Thanks Cam, Yeah I enjoy this stuff for sure, especially if there is time to enjoy it and not rush about.

@alidad3695 4 жыл бұрын

Dear brother very good and helpfully video with good explain .God bleased you i am Ali dad from pakistan.

@BundyBearsShed 4 жыл бұрын

Thanks Ali.

@gaynorjasonjack 4 ай бұрын

Pricless info, thanks for sharing

@BundyBearsShed 4 ай бұрын

Our pleasure!

@johnkinnane547 5 жыл бұрын

G'day Lance good vid mate, it was interesting listening to you diagnose the problems with the head. I really enjoyed the two videos mate well done and good explanations as to what was done and how it should have been done if that makes sense. One more thing my shed is insulated in the roof and walls and you know why it's those brass monkeys down here! John

@BundyBearsShed 5 жыл бұрын

Thanks John, No need for that insulation here.

@johnkinnane547 5 жыл бұрын

Bundy Bears Shed sometimes I really wish we had your whether instead of the freezing temps we get down here in winter!

@bcbloc02 5 жыл бұрын

If your shed was insulated it wouldn't be hotter than blazes in there in the summertime. :-)

@BundyBearsShed 5 жыл бұрын

No but I put the fan on and have a spoon of cement powder and toughen up in summer, lol.

@JACKATTACKED 5 жыл бұрын

Need to be careful pulling the head off it Lance 😂

@thusharaindunil2240 3 жыл бұрын

Good Lance Sri lanka

@BundyBearsShed 3 жыл бұрын

Thankyou.

@JBFromOZ 5 жыл бұрын

Ahh that takes me back! On the more modern iron, it’s pretty common to have oily buildups as a result of “emission controls” and crankcase ventilation (connecting the vapours in the crankcase up to the intake - resulting in that oily mess) I’m guessing this is not so much the case with this era?

@BundyBearsShed 5 жыл бұрын

No just lots of black drippy oil.

@ianbertenshaw4350 5 жыл бұрын

Never seen a valve spring compressor like that ! Where did you get it ?

@BundyBearsShed 5 жыл бұрын

Had it for years, Noah may have used it I think. It came with tools I bought from an old mechanic one time.

@giemme4492 5 жыл бұрын

HI Lance, I am enthusiastically watching to all your MF135 restoration video and got one question on this PERKINS AD3 152 head. As I posted in you other video I liked, my AD3 152 engin does breath a lot (you can see oil stem like smoke form the breather hose when running and oil on the floor in the shed) despite it starts just fine both cold and hot and after swarming up no blue /white exhausts are noticeable. Therefore my question is: can a worn head /rocket cause this breathing? What I did also notice is the fact the head cover leaks a little bit form one of the two cover studs with washer, hence I Suspect a lot of oil is in there; inside the cover itself. I do really thank you for suggestion and help. Ciao from Italy

@BundyBearsShed 5 жыл бұрын

No the only cause will be worn rings or bore or both combined.

@giemme4492 5 жыл бұрын

Thanks Lance, I also thought so but the fact it does neither have blue exhaust nor difficult to start when cold made me wondering… I also get some "smoke" from oil fil plug and oil level rod gauge if I undo then when hot.In your opinion when oil breathe can be considered “huge” and worth to overhaul the engine ? 1lt/oil every 100hours perhaps?