i know Im randomly asking but does any of you know of a way to log back into an Instagram account?? I was dumb forgot the password. I appreciate any assistance you can offer me

@Westley Clayton instablaster ;)

@Brooks Salvador thanks for your reply. I found the site on google and I'm in the hacking process now. Looks like it's gonna take a while so I will get back to you later with my results.

@Brooks Salvador it worked and I actually got access to my account again. I am so happy! Thank you so much you saved my account!

@Westley Clayton You are welcome xD

Thanks man

It can Be a head gasket hard to tell without seeing it but if you have a bad injector you will have white smoke too. Is the coolest pushing out of the rad Or bubbles in the coolant with the rad cap removed. Make sure you take the cap off when the engine is cool you can get burnt. If that looks good I would loosen one of the injector lines at a time and see if the engine sounds different when loosed taking it and open another one and see if the engine runs differently till you do all do you injectors. If you find one that when you loosen off and the sound of the engine doesn’t change I would remove that injector get it checked.Hope this helps have a good one

cheap homesteading coolant is pushing out everywhere when I started it cold this morning when I took it off the trailer. No white smoke but coolant was blowing everywhere, from somewhere. It was difficult to start also. The engine wanted to “lock” as I was spinning it over to start it. I don’t see any signs that there is water in the oil.

It sounds like a he’d gasket. You probably have to pull the he’d off And take a look.

cheap homesteading I have a mechanic coming to look at it. If it’s the head gasket I found a Fel-Pro Top Gasket kit for the Perkins AD3.152 at my local O’Reilly Autoparts for $78. Part number HS21118C.

cheap homesteading Where can I purchase new head bolts? My mechanic looked at the tractor and it did blow the head gasket.

Here is the link thanks for watching Installing the oil pan on the Massey 231 /Perkins 152 engine. kzfaq.info/get/bejne/bJhzdrGH07yqdoE.html

@@cheaphomesteading - Thank you very much, Sir!

@@cheaphomesteading - Thank you very much! I must've missed it on the playlist. VERY helpful and much appreciated!

Been doing them for almost 50 years, probably done a few hundred by now, using a straight edge to check the head is flat is fine, it ain't formula one! they rarely warp anyway, it is more important, on these engines to make sure the liners have not sunk too far below the block surface, most gasket failures on these engines are caused by sunken liners as they move about when the engine is running and wear the sealing rings, on the gasket, away.

@@stevefuller1779 do you like the Perkins AD3.152 engines?