I can’t seem to match up the mode tables across my 5 old devices and one new one. I tried the “mode table switch” mentioned in the video (5 times S- or S+) but that doesn’t seem to do anything. The existing devices have mode names such as “rainbow”, “swan dancing” etc.. but the new one just has “M1”; “M2”, etc. to “M9”. How do I synchronise this? thanks. (All lights are RGBW and all controllers are MiBoxer WL5)

no support??? Hi, I have the miboxer 5in1 wifi. Now I've noticed that one miboxer lights up green when connected to WiFi and the LEDs have full brightness immediately when switched on and the other miboxer (bought at the same time from a dealer, optically no difference) when connected to WiFi lights up white and the LEDs softly ramp up from 0 to 100% when switching on and slowly softly darken when switched off. Is definitely on the device, could reproduce it with several devices and exchange. Green led on miboxer = 100% brightness immediately, White led = Ramp 0-100& in 1-2seconds. This is not good if you have 2 or more LED strips in a room and one stripe in the living room is immediately bright 100% and the other dims up and down in seconds. Do I have the wrong settings? I connected them with Tuya app and wifi out of the box. set with uni colored white LED strips (the same everywhere in my rooms). do you have any idea what that could be? firmware problem? description doesn't help. Or are there 2 versions of the box?

I cant link the remote....i click 3 times link after turning on the lights, but its just not linking at all....what do i do?

Is there a demonstration of some better dynamic modes? The flashing and blinking are quite annoying on the FUT044 MiBoxer unit I have. There are many other drivers out there that do music synchronization, and sequential color changing where the color change travels along the LED strip. Do Mi Lights do this? I'd like to stay with 24v

what powersupply did you use for the controller?

must i press the set button for different kind of light strips (rgb, rgbw, rgbcw, white,ww?) i found a video in this the guy says i have to set it, did not find any description about this in your manual. he said red light is rgbw, white light for white strips, and so on. thanks for reply.

In fut095 saturation does not work

Hello how to purchase and prise

This could not be any more of a confusing product.

Контроллер не реагирует на попытку подключиться, думал что попался брак, взял второй, так же не хочет подключатся, безполезный контроллер