Milking parlour DESIGN | Why ROBOTIC parlours are a BAD IDEA? | £436000 milking parlour

  Рет қаралды 39,622

FarmTheory

FarmTheory

Күн бұрын

This week we go on a deep dive into the design decisions behind our 'new' milking parlour!
Follow us on:
TikTok - / farmtheoryni
#smartfarming

Пікірлер: 154
@patrickbuckley7832
@patrickbuckley7832 8 ай бұрын
Probably the best parlor video ever made. Totally agree with robotic views, to be fair they do save physical labour but certainly dont save time and as for running costs, its better not to go there. Personally i still prefer my individual throughs in a sequential bailing.
@gethinjones1348
@gethinjones1348 8 ай бұрын
What a thoroughly comprehensive video on your parlour! Thanks for taking the time to make it- I enjoyed every minute of it! 👍🏻
@ciaranconeely8579
@ciaranconeely8579 8 ай бұрын
Comment for the algorithm to help the channel 👍 I'm a Beef Farmer. I don't know a whole lot about Dairying but that looks like The Fendt of Milking Parlours. Excellent video and excellent content though 👍👍👍.
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Thanks for that!
@Tullyvernon
@Tullyvernon 8 ай бұрын
Fantastic video Andrew, brilliant detail and all your decisions well explained! Really enjoyed it
@10thgenerationdairyman61
@10thgenerationdairyman61 8 ай бұрын
That is a really nice parlor. Ours does not have nearly as good of cow flow although we spent a lot less. You made a great point about people comparing robot milkers to old worn-out parlors. I agree, I'd rather spend on an efficient parlor that is not running 24/7.
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Thank you! We have an old harvest store bin like yours and it was nice to see how it was meant to be used in your videos! We only ever used it to store barley but it has the forage shoot etc.
@10thgenerationdairyman61
@10thgenerationdairyman61 8 ай бұрын
@@FarmTheoryNI Those Harvestore silos are pretty good for storing quality feed but are costly to maintain.
@joshcables4804
@joshcables4804 8 ай бұрын
Great video! Very informative! We are in Tasmania, Australia and are about to build our first parlour a 20 double up herringbone. Lots of inspiration with your video, I hope to start a channel soon to record how it goes.
@patmurphy7539
@patmurphy7539 8 ай бұрын
Well done great video,pays to hold tough and get what you want ,great parlour
@jgdairysmart8948
@jgdairysmart8948 8 ай бұрын
Totally agree with your collecting yard philosophy. For a short period we push one group in through the front and it's such a time waster having to turn them around. Also the slight incline is great 👍
@earlepriest2544
@earlepriest2544 8 ай бұрын
I have really enjoyed listening to this video and it has been explained so well. I used to relief milk many many yrs ago and the parlour was a lot smaller 12/12 but the head room didn’t help a 6ft tall milker, so your right a working space that is easy and light to work in is a big advantage great video. Oh and I agree parlour over robot
@trevormccullough312
@trevormccullough312 8 ай бұрын
Great video Andrew. Gives a clear insight on your decisions.
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Thanks!
@joemalone9380
@joemalone9380 8 ай бұрын
congratulations on a wonderful achievement . i hope you reap just rewards from your endeavours .
@keithaspin5160
@keithaspin5160 3 ай бұрын
Congratulations on producing such engaging and enjoyable content.....if i was upgrading a milking parlour...i would like to follow your intelligent and well thought out example. well done!!
@dave291973
@dave291973 8 ай бұрын
Great video on the subject of water heating you should get heat capture from your bulktank compressor when it’s cooling its warming water to feed the boiler up to 40c. It’s making a great difference and I’m saving loads
@rpark8265
@rpark8265 8 ай бұрын
A good explanation of your reasoning behind your decisions. I have a double up parlour with a wide pit 25 years old GEA and most of the equipment is the same as yours .I put ADF in last year and like the upgrade with 2 people milking its a great work environment.I was surprised that robots would have been cheaper but in the long run much more expensive running costs .As long as you can attract and keep staff parlours would still be the most cost efficient way to harvest milk I think 👍
@JohntyNich
@JohntyNich 8 ай бұрын
Excellent video. A much better parlour than a certain TP’s. When I did milk 20 years ago it was a similar wide pit, not as wide but it was an enjoyable place to be. TP’s is a good pit but you’ve taken it up a level or two to an excellent pit IMO.
@7018cowboy
@7018cowboy 8 ай бұрын
Great video. I do agree how people go from a bad parlor to robotics and see an improvement because that is what I did. We milk 530 cows in 11 a4 robots. We really do like the robots but some days it would be nice to do a milking in a parlor and know that the shift is done. Thanks for your time and info.
@grahamsmith9756
@grahamsmith9756 8 ай бұрын
Totally agree with a doubled up parlour with a wide pit Good idea with the pig slats and pit below
@sachinjadhav5440
@sachinjadhav5440 27 күн бұрын
It's cool and very helpful. Honestly you have passed on your knowledge with rational logic.
@charlotteashleyfarm
@charlotteashleyfarm 8 ай бұрын
Superb video!! We are transitioning into dairy and thoroughly enjoyed all of this 🎉🎉
@conor-breathnach
@conor-breathnach 8 ай бұрын
Best of luck with the test and the silage!
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
1 positive out of 470 animals...
@tonymckeage1028
@tonymckeage1028 2 ай бұрын
Great Video, my only (long term) experience milking milking cows was in a 28 aside herringbone milking 500 jersey cows, I have since had experience observing customers using robots, rotaries and herringbones, very few people use double up herringbones in NZ, robots change the whole dynamic (family) in terms of involvement with cows and the dairy farm, the technology and people issues are far more family friendly, the specific example i remember well was a similar sized herd to yours with the "share" milker stressed out and overworked because he was the "farmer" introducing 4 robots meant that the 3 generation (s) of the farming family became involved in the operation, the sharemilker was a lot less stressed because he didn't have to get cows in at 5 am, he simply came to the shed at 7am, did some cleaning and set up the gates for the paddocks for the day, at 9am his wife (ex teacher) would come down and do the computer stuff she was not involved with the Herringbone system before, but she loves the technology and animal focus! the children (pre and teens) love being involved and the farmer, (the share-mikers father-in-law) is happy to run the farm when the family is away! my son has extensive experience in big rotaries (
@Andy-ix2ox
@Andy-ix2ox 8 ай бұрын
I am one of the five. Delighted with this video. Maybe I am not as daft as I thought I was, we are currently milking 150 through a eight swing over and it is not the best way to spend your life. We have considered robots but for exactly the same reason as you have rejected them and we are still not deciding on the exact parlour to go with but have decided to go with sequential baling and I was very interested to hear what you had to say about the individual troughs versus what you have. Like the idea of the tunnel and moving the stuff out of the pit also . For me it was a hugely informative video thanks for posting it.
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
You have got very lucky you seen this! 😅A mistake in your design can be very expensive! Another point i didnt mention, make sure you earth EVERYTHING really well. I have steel mesh in the floor joined to the frame all grounded to a deep stake.
@Andy-ix2ox
@Andy-ix2ox 8 ай бұрын
@@FarmTheoryNI I am an electrician by trade so I have a pretty good understanding of the importance of a good earth , put in 3 phase this year in preparation for the build, GEA seem to be popular with KZfaqrs at the moment, did you have any particular reason for going with them? I am loath to go with a machine that I am not confident about the back up service although I suppose if you include enough redundancy’s you would probably negate that issue. I am not convinced that a double up is the best option however I am fairly well convinced that as we have the potential to go to 200 cows we need at least 24 units and of course acr’s and meters etc however as we have a split herd 40 percent autumn, 60 spring I think that feed to yield may be beneficial however I am definitely going to look very carefully into the stats in this regard, at the moment we run them as 2 different herds ( just to slow things up even further) . I would like to have the new unit as close to possible a one operator system as labour is just not affordable where we are.
@bobuncle8704
@bobuncle8704 8 ай бұрын
You should be on the milk parlour debating team. Great explanation 👍👍
@eoghanhayes7699
@eoghanhayes7699 8 ай бұрын
Great video, I love Tom pemberton great man for advocating agriculture to those who are a bit fresh to it, your for the die hards proper info👌🏼
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Absolutely what I'm aiming for. Trying to do something different and adding detail.
@macfarms
@macfarms 8 ай бұрын
Smaller scale but we milk in a similar GEA parlour. Had it 10 years now, little more I guess. Good overall, lots of features to it we should have took advantage of and didn't. We'll be going robot next though.
@wdfew8888
@wdfew8888 8 ай бұрын
Great video great insight you will definitely give Tom P a run for his money on KZfaq in a few months time!!
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Thanks! Its takes way more work than I imagined to make one video a week! Fair play to Tom managing 2 or 3!! 😂
@aidenowens1486
@aidenowens1486 8 ай бұрын
Great video, good details, so your high yielders get same amount of nuts as low yielders
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Not really, they are feed to yield but they can steal a bit of their neighbours feed.
@conneill8190
@conneill8190 8 ай бұрын
Great video... well done
@michaelking9254
@michaelking9254 8 ай бұрын
I am one of those people who never needs to know anything about dairy farming but I watch similar videos all the time because I enjoy them. I have just subscribed to your channel because I like your style and your logical explanations. Excellent.
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Thank you! 😅 I watch alot of videos on Rocket engines for some reason. 🤣
@georginafort5749
@georginafort5749 8 ай бұрын
Really interesting video. I'm in early stages of planning a new parlour. Some of things you've put in I had thought about and other bits never thought about doing. Totally agree on the robots view. Only thing you hadn't mentioned was why GEA? I've GEA now but not buying another one! Interesting what your thoughts were on picking the brand
@FarmTheoryNI
@FarmTheoryNI 7 ай бұрын
Honestly its just the "look and feel"?! GEA just make quality parts which make a quality parlour. Its a small extra cost over the lifespan of the investment.
@njomeara
@njomeara 8 ай бұрын
Starting install of my GEA swingover next week. Wish I'd seen the pig slat idea earlier
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Sorry! We can pretend they arnt as great as they are.
@davidkimmel4216
@davidkimmel4216 8 ай бұрын
Very interesting video. Thank You
@aidanquinn5498
@aidanquinn5498 7 ай бұрын
Great video content, and good luck
@markocarroll9424
@markocarroll9424 8 ай бұрын
Interesting video, very good job and good luck with the milking parlour What about a robot for smaller herds ? My dad milks 70 cows in Kerry but is slower
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Some situations they make sense for sure.
@danmurphy6541
@danmurphy6541 8 ай бұрын
Great stuff ta
@geraldbeard856
@geraldbeard856 8 ай бұрын
I think also something you didn't mention is with a conventional milking parlour if you have a grazing system you milk your cows in the morning turn them out in the field then get them all in for milking later in the day whereas robotic milking i don't really think a grazing system will work very well especially if your cows have to walk down a road or track to the other side of the farm .........cows cant open and shut gates very well on there own also i've heard some cows dry themselves off early like 6 months after they've calved or something cos not every cow likes being milked whereas a conventional parlour every cow that needs to be milked gets milked
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Oh yeah, how did I miss that one. 😆 Grazing only works well with a normal parlour, grazing on robots is forcing a square peg into a round hole.
@MrDavidSThompson
@MrDavidSThompson 8 ай бұрын
Would that gate at the back of the collecting not be better hinged to swing the other way, flush back against the rails to make it easier to close them in? Nice parlour and design. Also I would still go with the sort system. Have the cows going down the race every milking and it won't affect flow when you sort.
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
The gate works as part of the crush race so has to go that way! I maybe will try one at some point, i see what you mean about cows getting used to it!
@bobokeeffe4036
@bobokeeffe4036 8 ай бұрын
Great video, I would agree with your comparative advantages over robots but how would you rate your double up to a rotary milking parlor? 44 or 50 unit, less walking one man milking and cow flow and I would imagine cost is simular especially when looking at a shed width to facilitate rapid exit
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
I felt like I was just a little bit to small for a rotary, the cost was a fair bit more for a 50pt and I'm not convinced there is a benefit to going rotary on anything smaller.
@brenttonks4249
@brenttonks4249 8 ай бұрын
Agree with everything you’ve pointed out. What was the reason for going to a double up parlour over a Rotory style, I’m more so curious on your thoughts!
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
My future potential/desire to expand is limited so I figured I would never be able to take advantage of a rotary. You have extra capex and maintenance cost to balance.
@mervynrodgers9465
@mervynrodgers9465 8 ай бұрын
This is the best video I've seen explaining important parlour purchase decisions. Keep up the good work Andrew.
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Appreciate it! Condensing days or research into a 30 minute video. 😂
@tonyroberts779
@tonyroberts779 8 ай бұрын
Great video. Thanks
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Glad you liked it!
@josephhester8500
@josephhester8500 8 ай бұрын
Great video
@dekdek551
@dekdek551 8 ай бұрын
Fabulous share, very interesting. I agree that robots may seem a time saver, but you are tied to your phone or laptop.....who wants to go and chase up unmilked cows at 11pm!. Good luck with the silage, it has been raining cats and dogs here in Scotland for 24 hours solid!.
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
The silage was messy. Monday isnt going to be fun!
@johnforrestal9975
@johnforrestal9975 8 ай бұрын
Nice job.
@johnroliver
@johnroliver 8 ай бұрын
Andrew, what distance have you got from the kerb of the pit to the block wall that the feeders are mounted on? Are you you pleased with the space you have given the cows to stand?
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
I can't exactly remember, I feel like it might be 1760 maybe? The size is perfect, never had any issues.
@christianjoly4351
@christianjoly4351 8 ай бұрын
Good morning, what brand is your milking parlor and why not have a swing over installed? (you may have talked about it in the video but I'm not an English speaker....). Sincerely.
@toonseten
@toonseten 8 ай бұрын
Never tought about robots this way. Thank you.
@SimonStevensonJD6810
@SimonStevensonJD6810 8 ай бұрын
Brilliant video! A fantastic investment! We put in a new parlour in 2013 and it made a serious difference to our workload and the cows. Did you ever consider heat recovery to help heat your water? Tankcare fitted heat recovery for us back in 2020 and it noticeably reduced our electric bill! Ours has definitely paid for itself already. I know people have fitted oil boilers, they can give a ton of trouble and I’m told some suppliers have stopped fitting them?
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
I cant see a heat exchanger working well for us, our water is only leaving the cooler at 16 degrees. I didnt hear about the reliability issues of oil!
@SimonStevensonJD6810
@SimonStevensonJD6810 8 ай бұрын
@@FarmTheoryNI I didn’t see one working here either, I was proved wrong. We are similar to you where our tank is only about 50% full, we have plate cooler with well water & ice water from an ice builder. Our tank is doing very little work and I didn’t think the compressors would be running long enough for heat recovery, but every morning I have water to 55 degrees, it pumps to my parlour boiler, taking majority of work off it, re fills my tank boiler which isn’t as efficient as it fills straight after a wash so it goes in hot and has to sit for 48 hours until it’s used, also provides the hot water for my calf feeder and there’s still water left over. On a day where milks collected it may drop to 40 degrees if calves are busy on the feeder. It’s definitely one of the most cost effective things I’ve bought with no service required and works purely off waste heat from compressors.
@winstonfoster6009
@winstonfoster6009 8 ай бұрын
I was waiting for this,very informative ,are your cows at 2,2 centres,what width is the pit?would a heat recovery unit save your energy use at heating water
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
I cant remember the centres, its 2.8m. I priced all the above and it doesnt add up. My water is leaving my plate cooler at ~17 degrees, thats only 5 degrees above the water in temp.
@gaslight5
@gaslight5 8 ай бұрын
Excellent video. You should take real data on your electric heating costs, I could believe that it's costing 2 - 3 times more per kW of heat energy. A new boiler and tank is going to be very economical to buy in comparison to that production cost. Someone in a different industry will probably buy that electric system from you in a heart beat.
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
I have recorded all energy use in detail, the capital cost doesn't make sense to change. Current paying 15ppkwh for night tariff and oil would be around 10ppkwh.
@KennethMcCarthy35x
@KennethMcCarthy35x 8 ай бұрын
That was a brilliant video. Love the parlor. I'm late to your videos. But do you have solar panels to help power the boilers?
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
We do not, heat them at night on the cheap tariff for a single hot wash in the am. Solar energy is mid day when I don't need it
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Also, thanks!
@pjdee5879
@pjdee5879 8 ай бұрын
Very interesting points on your new parlour design. It is impressive and looks like it could do another fifty years. I can see you sweat the details. Impressed with your Python as well. 2 questions 1. Can you milk singlehanded or does it need a pair? 2. Not your design choice of course but would there have been much of a price difference with a swingover line?
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Thank you! You can milk on your own, it adds 15mins or so but it's not a nice experience. It needs two. Swingover was ~10% of the total project cost less.
@ypeveldhuis4527
@ypeveldhuis4527 8 ай бұрын
Glad you doubled up, clear vision but more important: less wear on the milkers hips pulling clusters from one side to the other. It is the main reason for retirement in NZ ! !
@AllanKeatley
@AllanKeatley 8 ай бұрын
As someone who is looking a new parlour i found this very informative. What made you go for GEA?
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Yep, GEA. Very happy with it, it's old tech and bad software but it just works and the quality is really good.
@jameswilson9142
@jameswilson9142 8 ай бұрын
100 per cent agree about robots, been involved with commissioning robots and most farms have had a very small parlour so robots made a difference. But a good parlour would have made a bigger difference, when you have milked your cows you have the rest of the day.
@johnhynes3911
@johnhynes3911 8 ай бұрын
Fantastic design and video. Any drafter?
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Thanks! No drafting gates.
@Alejandrogarcia-fp1fr
@Alejandrogarcia-fp1fr 7 ай бұрын
nice video very interesting
@alexgood5584
@alexgood5584 8 ай бұрын
Whats your thoughts on a rotary dairy with a robotic arm for cupping up, post spray etc? Essentially the same as normal milking but instead of milking staff you have a robot so problems will only occur when you or another staff member are there pushing cows in or feeding calves etc. I'm looking at this maybe 5 years down the road as my dad can't physically milk in our doubled up parlour due to a back problem but he loves being around the cows and rarely goes on holidays 🤣
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Robotic twice a day miking is the future for sure on large scale systems.
@kierandaly7186
@kierandaly7186 8 ай бұрын
Very interesting parlour design video! As a fellow tall person getting into dairy spring 2024 I'm just wondering what depth your milking pit is?
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
1m from cows standing to floor!
@kierandaly7186
@kierandaly7186 8 ай бұрын
@@FarmTheoryNI Thank you!
@johnmann2904
@johnmann2904 4 ай бұрын
What angle are the cows at in the parlour? Do you have auto ID? Can you still attach a kick bar with those screens? I wanted to do a similar thing 👍
@FarmTheoryNI
@FarmTheoryNI 4 ай бұрын
80°, yep, tag RFID. You can still get a kicking bar, it's rare we need one. 👌
@daireharlin181
@daireharlin181 8 ай бұрын
A heat recovery unit from the milk tank may help reduce your electric costs
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Priced all that, the ROI was pretty bad.
@robhall912
@robhall912 8 ай бұрын
Even with the price of oil at its highest, would it still make sense if you had the hind sight at the beginning to go oil instead of electric for the boiler?
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Yeah, it definitely would have. Electric is a bad way to heat water.
@Collinsstephenr
@Collinsstephenr 8 ай бұрын
Two things. Given that your is a double up does it not lend itself to been two person job milking in order to get the most efficiency out of it?? One person milking will always have a lot of clusters not milking? Also on your entrance to collecting yard. Cows turn three times to face back of palour. Not great for cow flow?? Possible to have them entering straight in from back corner of shed and turn in once
@Collinsstephenr
@Collinsstephenr 8 ай бұрын
Should also added great video. Your reasons for your design was very well explained
@jamesoconnor4641
@jamesoconnor4641 8 ай бұрын
Looking like a great place to milk . What way do the economics of it work out ? That aspect needs a bit more explaining. What’s cost per litre of maintenance and original capital costs? When you say 1 hour in morning and 50 minute in afternoon is that including start up and wash down? A lot of units to wash and concrete. Pigs slats look like great idea.
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Savings in meal were greater than the repayments, small increase in milk yield. Cost for labour to have staff for every milking was more than expected but it affords me a lot more time and flexibility. The time includes washing and starting.
@pauldoc567
@pauldoc567 3 ай бұрын
With electric being a major cost in your milking cycle is there any solar options would help cut that cost down you think?
@FarmTheoryNI
@FarmTheoryNI 3 ай бұрын
I need the energy when there is no sun. Solar makes no sense on dairy farms.
@columbbrazil70
@columbbrazil70 8 ай бұрын
Best dairy video produced, honest fair ,must add !!all the promotional videos about new systems and farmers (wait for it) you see all these dairymen with 100k thousands of investments and the f Dirt and filth of them clothes covered in shit ,you are immaculate, a credit to your mom 😂😂😂
@user-uo7nc3ty2j
@user-uo7nc3ty2j 8 ай бұрын
Hi, how many milking points are there? We are looking into putting a rapid exit in, We will be milking 150-180 high yielding cows through it. Just trying to decide how many milking points in a double up would be best for one man milking?
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
16 would be okay for one man. 20 is too many imo but I'm not sure if you would ever regret going bigger. 🤷
@DM-eq1fq
@DM-eq1fq 8 ай бұрын
Does having those 180deg turns at the front and rear of the parlour have any effect on hoof health?
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Nothing I have noticed.
@georgemitchell1223
@georgemitchell1223 8 ай бұрын
Fair enough reasoning but would strongly disagree about robots. Had them 3.5 years coming from an auto tandem loaded with everything which was a joy to work in and couldn't go back. Got rid of so much labour, next to no mastitis/antibiotics and the 24/7 on call isn't anywhere near as bad as made out to be; alarms are rare. You're tied to animals anyway, and no more so than milking 2x/365. If you train them to need fetching then that's what you'll do. But agreed, they don't suit everyone
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Fair point, I knew that bit would encourage some engagement!
@samfisher8056
@samfisher8056 7 ай бұрын
New viewer here, great video! Was just wondering what is your opinion on cross breeding?
@FarmTheoryNI
@FarmTheoryNI 7 ай бұрын
It can work but it seems to me it's not all sunshine and roses like some people say. Holstein is the number one breed by far for a good reason.
@jamesmccambridge7457
@jamesmccambridge7457 5 ай бұрын
So interesting, loved every min of it, your a cool dude, and my goodness at 6feet 5 inches that's a brave height, you might need a hard hat working in the parlour😂😂
@FarmTheoryNI
@FarmTheoryNI 5 ай бұрын
Lots of head room! 😆
@patrickkelly1055
@patrickkelly1055 8 ай бұрын
Opinions on gas for heating the water ?
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
I would prefer oil, gas is a bit cheaper but it was my understanding your tied to one supplier who installed the tank?
@Tiagbenasen
@Tiagbenasen 8 ай бұрын
Would you be able to share a plan of your build?
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
If I can find one sure. I will have a look tomorrow.
@johnh1353
@johnh1353 8 ай бұрын
Some things are more maintainable when they're analog ... complexity doesn't always == efficiency ... as an computer engineer i'm always wrestling with these eternal questions
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
"Keep it simple stupid" is a Moto to live by.
@ericdineen4842
@ericdineen4842 8 ай бұрын
Brilliant video
@DM-eq1fq
@DM-eq1fq 8 ай бұрын
Do you have any solar panels that would help offset your electricity usage?
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Would it? We use most electric at milking times, which is at 7am and 5pm. The one time we don't use energy is in the middle.of the day.
@DM-eq1fq
@DM-eq1fq 8 ай бұрын
@@FarmTheoryNI no idea tbh, but panels storing into batteries would that help? Assumed you had looked into it.
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
@@DM-eq1fq I did, conclusion was nothing gives a return on investment quick enough to make sense re: energy. Savings where all in small wins which are free.
@kerrsloan2952
@kerrsloan2952 8 ай бұрын
Cracking setup
@colinn08
@colinn08 8 ай бұрын
Please tell me the name of the company that done your polycarbonate sheeting/dung guard! I can’t stand all the dung that comes down in the pit of our parlour 🤔
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Betebe! It's great!
@colinn08
@colinn08 8 ай бұрын
Sorry I can’t find much on a google search? Is that the name of the company or product? Do they measure and fit for you etc. thanks
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
@@colinn08 betebe.de, they make the stall work and do the polycarbonate sheet as part of it. Not sure if they do retrofit.
@colinn08
@colinn08 8 ай бұрын
Understood thanks
@telmoazevedo8958
@telmoazevedo8958 8 ай бұрын
how the hell are 4 robots much cheaper i don't understand. How many people are doing the milking? How many milkings a day? How many milking places?
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
When I build this four gea robots where under 300k and there is much less infrastructure. Tbf it is probably a lie and 4 robots would have been more but we would have only required 3.
@richardspeakes2883
@richardspeakes2883 8 ай бұрын
Says hi to little lad from lad Hanford
@DjDj-ww6rh
@DjDj-ww6rh 8 ай бұрын
Totally agree. Robot is over priced
@finbarreburn5112
@finbarreburn5112 8 ай бұрын
My neighbour of 57yrs and lifelong good cow-man no tech wizard put in a robot system 4 years ago and is forever tortured now with animal health problems, Late detection of sick cows ( milk fever, chills etc) resulting in exceptionally high cull & mortality rates. 'The biggest mistake of my life' 😠 😡 FT index 💯
@PVAglue-fi4kc
@PVAglue-fi4kc 7 ай бұрын
The sales man had all the answer.
@robinhill9414
@robinhill9414 8 ай бұрын
Big numbers. Rotary only answer
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Absolutely agree. I think the tipping point is 250 cows?
@robinhill9414
@robinhill9414 8 ай бұрын
40 point 200 up
@Tullyvernon
@Tullyvernon 8 ай бұрын
​@@robinhill9414I agree
@Andy-ix2ox
@Andy-ix2ox 8 ай бұрын
I have actually looked at the figures for a 40 point rotary, I worked in one years ago and I was impressed with the throughput but you realistically can’t justify it on borrowed money for any less than c. 300 cows provided they are at over 500kg’s of solids and you would need more if you aren’t at that point. The cost of the infrastructure to accommodate a 40 point rotary is considerably more than a 24 point swing over with sequential baling, obviously Andrew has gone for a much more expensive option however and I don’t know how he would have faired with a comparison.
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
@@Andy-ix2ox interesting. I guess the ability to spec up or down a parlour applies to rotaries also so the comparison you make is probably still valid.
@matthewshaw3718
@matthewshaw3718 8 ай бұрын
Heat exchanger will pay for itself in a year or so 👍🏻
@richardwilson4379
@richardwilson4379 8 ай бұрын
Not be long till robots will be working in your parlour.😂.well explained ,but there's new inventions all the time ,hard to keep up
@Charinater69
@Charinater69 8 ай бұрын
Wow wouldn't u just love to be a cow here very stylish place u designed here much love 💕 😊
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Thanks!
@pixie706
@pixie706 8 ай бұрын
Hands on twice a day is of great value to monitor cow health . are you aware of whether or not your herd is content ?
@FarmTheoryNI
@FarmTheoryNI 8 ай бұрын
Cows seem to be happy enough not the weather has improved. 😅 They didn't enjoy September rain.
@daireharlin181
@daireharlin181 8 ай бұрын
You are more tied to the farm with the robot than with the parlour.
1 класс vs 11 класс  (игрушка)
00:30
БЕРТ
Рет қаралды 3,9 МЛН
Василиса наняла личного массажиста 😂 #shorts
00:22
Денис Кукояка
Рет қаралды 7 МЛН
FOOLED THE GUARD🤢
00:54
INO
Рет қаралды 49 МЛН
THE FULL WASH ON A 24 48 GEA PARLOUR
34:16
Sisters in wellies
Рет қаралды 19 М.
Small dairy farm tour in Saskatchewan
21:20
Sc H
Рет қаралды 14 М.
This Dairy Has A Robotic Feeding System!
14:44
SaskDutch Kid
Рет қаралды 66 М.
How MUCH does it COST to make 1 TON of SILAGE??
23:38
FarmTheory
Рет қаралды 9 М.
MOWING our SECOND CUT!   |  SILAGE SHORTAGE COMING?!
25:58
FarmTheory
Рет қаралды 9 М.
Никто не сможет поймать...
0:42
AnimalisTop
Рет қаралды 15 МЛН
Smart Sigma Kid #funny #sigma #comedy
0:19
CRAZY GREAPA
Рет қаралды 13 МЛН
БАТЯ ПЛАКИ-ПЛАКИ
0:47
LavrenSem
Рет қаралды 3,3 МЛН
Неприятная Встреча На Мосту - Полярная звезда #shorts
0:59
Полярная звезда - Kuzey Yıldızı
Рет қаралды 2,9 МЛН
Брось вызов чемодану😱
0:33
FilmBytes
Рет қаралды 2,8 МЛН