Miller 215 vs. Lincoln 215

No video

Miller 215 vs. Lincoln 215

Рет қаралды 19,020

Күн бұрын

Baker's breakdown of the Miller Multimatic 215 vs the Lincoln Power MIG 215! We go over all of the differences and give you a close-up look at both machines. If you are leaning towards one over the other watch our complete review and demo on the machine we will link below.
Miller 215 Review Video
• Miller Multimatic 215 ...
Miller 215 Pricing:
bakersgas.com/...
Lincoln 215 Review Video
• Lincoln Electric Power...
Lincoln 215 Pricing:
bakersgas.com/...

Пікірлер: 43

@benvin10365 6 ай бұрын

I learned on a Lincoln and own a Miller 215. Both are really good welders.

@garybrown9719 6 ай бұрын

Mines like brand new barley been used, fan comes on but the screen is dead and no wire feed very disappointed😢

@donsterful 5 ай бұрын

Good comparison.... after doing the settings comparison I would have shut off the units so that we could hear you better over the fan

@9Antonian 7 ай бұрын

Very good comparison, but, that background noise brought down the quality of the video. Still very informative and I appreciate your time, thank you sir.

@Dane_17 11 ай бұрын

Awesome video, big thing to note between them is the miller will do up to 3/8 aluminum with spoolgun but the lincoln will only do up to 3/16 with spoolgun. Just found this out when i was looking at getting the lincoln for doing aluminum welding.

@solerso68 2 ай бұрын

Miller/Hobart has a better spool gun available. The SR 100 and the SR150 are both much better than the magnum 100 ..Lincoln makes better spool guns but they cost thousands of ddollars. You can use a 150 amp Tweco gun with this machine and its basically equivalent to the Spool runner.

@jvazquez53 11 ай бұрын

After one year with my Lincoln 215MPi, all I can say is that I am very happy. My prior welder was a 210 and there were a few things I did not like, luckily, I sold it for more than I paid for! LOL!!!

@sergiooterorubio7969 6 ай бұрын

What was those few things with the 210 ??? because i got one

@horaciosalinas8145 Ай бұрын

Cheap dude !

@hubertrobinson8825 7 ай бұрын

I'm always a Lincoln person although I've used a lot of Millers in my time all my personal welders are Lincolns

@reedsmetalworks6664 11 ай бұрын

Great video.Thanks for posting.I own Lincolns, Millers,ESAB and a Fronius welding machine.What I do notice with my Lincoln 210MP is with that drive roll system you have to keep it clean.Junk builds up in those wire grooves and actually causes wire feeding problems.One thing I found out that makes it stay cleaner is running those Weld Aid clamp on wire cleaners.

@marcanthony854 11 ай бұрын

Andrew, is time for me to call Steve and get another Lincoln! I still have My SP135 & SP175 along with the other 7 Lincoln MiG’s, TiG’s & Plasma’s. Would be a Great Addition! Thanks for another Great Review!

@BakersGas 10 ай бұрын

Thanks for watching! We will let Steve know to expect a call or email :) We are happy to help!

@blackjackfabrication4043 7 ай бұрын

Locally, the Lincoln warranty isn’t something that I can use easily. Which is a big deal. The screen went out on my Lincoln and now I’m without a welder. The Miller I can take to the local welding supply and they will fix it in town, the Lincoln they send off to another state. You might want to check if they can do local repairs on either brand. Otherwise you will be weeks without a machine.

@garybrown9719 6 ай бұрын

My Miller 215 is like brand new barley been used, fan comes on but the screen is dead and no wire feed very disappointed 😢

@SquareBodyK5 3 ай бұрын

Yikes @@garybrown9719

@teak5476 11 ай бұрын

I have the Lincolns 210 mp, good solid welder.

@tomthompson7400 7 ай бұрын

the fan would drive me nuts ,,, it ruined your video ... I will just buy an ewm I think

@jaival_rhaine 5 күн бұрын

Which is better in running 6011? Or 6010 if they can..

@user-qh7rt9ky4g 2 ай бұрын

Would either be good for welding structural or pipe ?

@user-cz7iq5jy4u 6 ай бұрын

Posso adquirir está máquina de salda como eu posso comprar ela

@blackjackfabrication4043 7 ай бұрын

Will an 11lb spool fit on the Miller? That is a big deal that you sort of skipped over.

@justinwharry8148 10 ай бұрын

You can adjust the voltage and wire speed without going into manual cv on the Lincoln.

@BakersGas 9 ай бұрын

Yes

@chadtrahan3262 8 ай бұрын

Can either one of them be run on a generator?

@robertdayberry3682 3 ай бұрын

Yes sir I run my own a champion 7850 runs like a charm doesn’t miss a beat

@user-qh7rt9ky4g 2 ай бұрын

What sort of welding do you use the 215 for ?

@808DC2R 6 ай бұрын

Is this 120v?

@user-cz7iq5jy4u 6 ай бұрын

Quanto custa está máquina de salda

@speedwayman100 3 күн бұрын

what version of everlast machine would be comparable to these two?Also how would these match up to hobarts 200 multi?

@spoolinsvt6489 4 ай бұрын

How is that fan in person? Is it as loud as it is in the video?

@fishuntr 9 ай бұрын

Really liked your Red vs Blue comparison video. I went in almost locked on Miller and now leaning to Lincoln. I do have one question. How do the grounding clamps compare? The mig guns appeared quite different in size and quality. Thank you.

@BakersGas 9 ай бұрын

The Lincoln one is probably a bit nicer but honestly comparable. We have some Black Friday deals on both! Reach out and we can help!

@blasvelasco717 7 ай бұрын

how many fans does miller have? Two like Lincoln?

@martygrajeda3457 2 ай бұрын

Always good videos 🇺🇸

@globofgreen 2 ай бұрын

Can the Lincoln only run 2lb spools? If so how often do you have to change them out

@scooterinvegas1 2 ай бұрын

The optional spoolgun holds a 2lb roll. Inside the welder itself it holds a 10lb roll.

@MrMrsregor 4 ай бұрын

will ether and/or both of these accept 10 pound wire spools ? or just the smaller wire spools ?

@AlastairDEW Ай бұрын

Both will and come with adapters. He mentions this briefly near the beginning of the video.

@whotube357 2 ай бұрын

Had a spoolgun, got rid of it. Too big and clumsy

@user-ri7st8yn2b 9 ай бұрын

la mejor opción miller , compre la linconl 215 una basura

@vadillo1 4 ай бұрын

Puedes ser más específico? Qué fue lo que no funcionó bien?

@speedwayman100 3 күн бұрын

just did some research and everlast blows these two away.they give you a better warranty and include things these two don't including tig torch and foot pedal and duty cycle is better.