As an electrician, the way he fed and pushed the fish tape through the raceway is almost too hard to watch

Vince..... if you hold the black handle and just feed the fish tape.... goes a hell of a lot quicker

Would have liked more info on the battery powered fish tape. Good vid though

Great video. I like the products. But most of all you guys do a great job showing what all products can do or don't do . Keep up the great work. Philly love here.

I've been waiting for someone to post about this. Awesome man

If you'r like me. You are probably hating Milwaukee tools right now. All this amazing innovation and tech in their tools and if you'r a tool guy your probably thinking like I am. "Damn I got to get this. For me the Milwaukee obsession began with the M12 - 3/8 drive ratchet. Then I waited for Christmas in March. When I could finally get my hands on their new M-12 Stubby Impact gun. That was it. I was hooked. I went all out after that. With their M12 system. I carry their M12 ratchet, reciprocating saw, jig saw, hammer drill, 1/2 impact gun. All in my rolling tool box at work. I also have a pretty large investment at home in Dewalt XR 20 volt. Heres' the part where I believe maybe, I need an Intervention. I have a double whammy. I am a gadget guy and a tool guy and Milwaukee is kicking some serious ass and I am seriously considering replacing my entire Dewalt tool system and getting the M18 Milwaukee system. ( gotta have it ) I know, I will start a new movement. Like the "Me Too" and "Just Say No" movements. I will get a Tee shirt in Milwaukee red and I will call mine The "Gotta Have It Milwaukee " movement. I used to think more voltage translated to more more power. That's not true. Trust me. I am an industrial maintenance mechanic for a large corporation and the M12 system it's compactness of design and it's light weight. Makes it an amazingly Ideal system to carry in a rolling tool chest . So you don't have to run back to the shop when the need arises for a reciprocating saw ( ie Sawz all , Jig saw. ) The M12 system is a 12 volt system. I know your probably thinking 12 volts is this guy nuts ?. Trust me, the M12 system has certainly disproved my old school of thought on Voltage = power. Only one question I have to ask Milwaukee after I start replacing my Dewalt tools. How many Milwaukee replacement tools are required to be purchased before Milwaukee will supply a free divorce attorney. ( I am probably going to need one. ) Oh yeah, did I fail to mention. " I hate Milwaukee". lol "Semper FI " Milwaukee

Great demo of the fish tape! Thank you for getting this video up. Keep up the great work.

First demo I've seen on the M18 Fish Tape Puller. Thanks !

Would have liked to know more about the power fish tape, 360 bends amazing.

Been searching for this. Great review!! Definitely getting this for my team

I wish the demonstration had some wire inside the conduit. I'm constantly adding wire to conduit.

Awsome video .. ;) I just ordered the milauwkee 100ft polymer w/ metal tip fish tape ;) really can't wait to get it now .. Thanks

I now refuse to use another fish tape until I have that powered one in my hand... and I'm dragging my apprentice on a pallet with cinder blocks. Amazing product, great video!

what happens the end breaks off , how do you connect the wire

I've beyond given up on Dewalt whenever my tools die lol. Milwaukee or Makita!

I need that fishtape vince love it milwaukee..

Do you think it would be storing enough to pull 200 ft of 1” poly we’ll line through 3” conduit with some 22s and 45 degree bends

You can’t pull out/push the tape with one hand while holding the handle with the other? In other words, do you have to turn the case to get the tape out?

Those fish tapes look really nice. I'm a little iffy on the power fish tape just because you can't feel if the wires hit something or if the guy on the other end stops because he got a tangle

Are those fish tapes already available? If not, when will they be?

Anything to run conduit inside a wall without breaking the dry wall?

Great vid showing actual use. How easy was it to pull the tape out of the angler power tape? Or did it actually push the tape out?

How does it do with flex ? Emt is smooth inside

I’m not en electrician, I have a drain cleaning business, I could on occasion use this...I do sometimes use the hand crank ones when I need to fish something out of a sewer line... sometimes tree roots will fall off the cable after cutting them loose, then you have to try snagging them again or pushing out into the city line..... occasionally they are just too big and you have to keep going in with the cable .. it can be a pain in the ass....a fish tape with a treble hook sometimes will work,, also if you have a ton of wet wipes a fish tape and hook are faster... but that’s a lot of money for use maybe once a year

Great video Vince

Does it have a remote on and off to pull alone?

Regarding the electric fish shaped the only thing I do wish is that it had a setting for what gauge wire or you know what you could pull on it foot pounds before I stretched it or broke it does it have a safety to where it doesn't snap the wire hundred feet down the pipe

I am very impressed normally a non conductive fish tape would be a real pain. Thanks guys you are the best

And this is why I love the air compressor, jetline, and rat combo

Wow that is powerful! Keep up the great videos

Now if we could only have an indicator that let us know when it exited the pipe, this would be the ultimate fish tape

wow it is amazing only electrician know how difficult is that thanks i wanna one like this

Why about if there is wire already in the conduit and ya had to add another circuit? How well will the tape work?

Good job Vince. Nice video lol !!!!!!

When will this be available???????????????????????????????????????

Well done 👍

Those are pretty awesome

@vcg construction have you ever use greatlakes power tools im just trying to see if they are legit thanks in advance!!

Vince you did it again gotta go to the bank and pre order it when it comes out. As always great video

I went fishing today... I was at work and it took me 3 hours to reel her in..

Whats the warranty on the fish tapes?

I bought a Milwaukee tape today!!! 🤗

Fyi when pushing fish tape hold it by the handle with one hand and as you feed it with the other hand it will unwind as you feed it

Someone show that man how to properly pull fish tape out of the roll!! On the power pull only issue I would be afraid of is when I hit a snag pulling a long run sometimes it has an issue that requires attention on the other end, this beast would just rip the wire apart, right?

CONGRATS TO VCG ON 89,000 SUBSCRIBERS !!! 👍👍

Absolutely need these vids! Actually doing the thing start to finish!

Pretty awesome fish tape. But I wish the Milwaukee guys would have showed you how to unspool it the right way while pushing it.

I want to see it go through a 150 ft run with 540 degrees of bends and cheated couplings every 10 feet

Where was this? At a convention maybe? Interested as I am an Electrical Company and want to go experiment for myself.

That’s a cool piece of tool

Makita needs to pick up their game as Milwaukee is coming out with better suited tools. Might have to start changing my collection over.

Well still Its steal pipes, so smooth and easy to pull , I would like to see you do that with the pipes we use in Norway .

I would add a detachable wind up knob on the hand held fish. Winding up a 100' fish seems to take forever.

That was hard to watch. Shouldn't there be some sort of handle on the casing to spin the reel??

Where the 3/4 pvc underground pipe with wather test ?

No information available on the powered fishtape anywhere. More info would be great id definitely pre-order this tool.

Nice tools

Did they give a price and release date for that m18 fish tape puller?

Dude just hold the handle on the fish tape when you unwind it..

I'm sure this will help me a lot in my work I can not wait to get it .... Watch from Iraq

I'm still really jealous. Love thoes expressions Vince makes, dang haters

thats pretty nice id like to see it go in pvc pipe .i find pvc has more drag then metal pipe

I do not know why, but it bugged the hell out of me that he didn't hold the handle and pull the tape out as he was feeding in. Like the video and Milwaukee Tools.

That doesn’t go through most EMT…we rarely use that snake…unless it’s 2”+ PVC. It works real nice and it’s very sturdy but the TIP is like 10” too long.

I need it to go through grey 1” PVC conduit for swimming pool lights. I can’t get anything but meatal fishtapes past like 60’

Well that’s cool!

Yes! Yes! Yes! Milwaukee is stra8 killin it

Lol the commentary is dank af

Milwaukee is showing Klein how to make tools.

Obviously not an electrician.. at 5:00 that's not how you pull a fishtape out... you hold the handle and pull out the tape. Backward winding causes binds.

New Milwaukee tool cart at 02:35 ? Or just a cart with a Milwaukee sticker?

Was anyone else kind of hoping for it To pop out and poke him in the eye for the way he was feeding that fish tape..

Yo show the electric fish tape

what is that electrical power fishing tape called

First and great video

I'd trust Milwaukee any day! Their tools get the job done

What's the price on that power tape?

Forget a fish tape puller give me a fish tape feeder. Now that would be awesome

You could have pulled the fishtape out instead of spinning it to make it comes out

Did you mean: "very cool guys, like Adam over here."

That’s a nice shirt

Good job on feeding that fish tape in😂

"I will say this"...

Vince best

once i saw him fish i hopped right to the comments, wtf hold the handle dude.

It would have been easier if you just held the handle and pulled the fish tape out instead of rolling it out. If that was a steel tape it would have been all screwed up on the inside.

Here's an idea... put a little nub handle on the red part and reeling it back in will be a lot easier... 👍 Just give me 10k for the thought. 😂

Has option to use the electric fish tape : uses basic one instead

You feeding that fish tape the hard way brotha.

I bet those fish tapes don’t push too well in any pipe larger than 1”

So much hate in the comments. Not everyone is an electrician by trade. That’s how you roll it up not completely unreasonable that it would come out the same way. The guy demonstrating could have let a brotha know though

89k

The point of a nonconductive fish tape is to fish through pipes that already have live wires in them. I think this demo missed that very important point.

Buddies forearms have never burned so much in his life. That was tough to watch. And people wonder why electricians charge so much

Come on bud... always pull from a fish tape and use the handle and body to wind it back up.

ASMR. Lol. 89k also

Lmao I worry about someones wire getting stuck and ripping an entire wall out

OMG now your making videos of you going fishing LOL

Vince your perfect men

In my line of work in the oil feild my boss would kick my ass if I even put three 90 dagree bends in with out pull points