Mini Cooper Halogen to LCI2 Headlight Retrofit

Рет қаралды 8,081

9 ай бұрын

I’ve been wanting the mini with these headlights since I decided I wanted a mini! So it was a bit painful that the one I eventually bought, ticked all the boxes apart from the headlights!
So after a long research I started hunting for the parts on eBay.
To break it down the following are the part numbers for these headlights:
63115A01964 - LCI2 RHD R Black
63115A01963 - LCI2 RHD L Black
90097751 - DRL/ Indicator module for passenger side
90101131 - DRL/ Indicator module for drivers side
9477748 x2 - modules for low/high beam
If you’re doing this upgrade from halogen then you need to rewire the headlights. I compared the halogen wiring diagram against the LCI2, and prepared the table on that paper in the video.
You might also need to update your BDC. There are a couple forums on this, so do your homework before you start buying anything.
You will obviously need to code the new headlights, which is a massive task. I probably did most of the research on that. I used E-sys but got stuck after I got them to light up, so I had someone help, especially with clearing all the errors in the end.
Do this at your own risk, and make sure everything will work, and the retrofit is physically possible.
I got quoted ridiculous amounts for this retrofit ranging from £1200 to £1500! Coding alone ranges from mates rate £50 to £130, done remotely!
All in all I managed to do this complete retrofit for £400.

Пікірлер: 29

@MiniBrothas 13 күн бұрын

Very cool! I may need this info later!

@carcreationsyt 9 ай бұрын

looks good!

@DanielSarvari 8 ай бұрын

It does!

@kopano.raophala 8 ай бұрын

Looks great mate. Tell me would I need to change wiring if I have pre-lci LEDs? Or will coding work

@DanielSarvari 8 ай бұрын

@@kopano.raophala if you already have the LED headlights you don’t need all this effort to rewire. Only plug and code.

@adamsanbarao5 7 ай бұрын

Looks greate mate. Where did you get this table with the pin position relationship? E86 plug pin assignment

@DanielSarvari 6 ай бұрын

I worked it out comparing the halogen to LCI2 headlight diagrams

@TheRedgtv2000 13 күн бұрын

Have you tried the low beam at night? Mine is awful 2 different shape of square even if you adjust the up down or side to side screws, still projects low on the road with square shape not universally even like factory headlights!

@terencejong2409 3 ай бұрын

Awesome video ! I have a 2017 with the pre-LCI LED headlights. Do you know if those also require rewiring or its plug & play ? Thanks mate

@DanielSarvari 28 күн бұрын

Sorry for the late response, no re-wiring required just coding.

@samsexton4039 6 ай бұрын

Hi mate Could I do this to my mini F56 one D. It’s got good spec just don’t have the LED lights im gonna get Pre LCI lights but just didn’t know if the BDC Body Domain Controller might be different stopping me from doing this

@DanielSarvari 6 ай бұрын

As far as I’m aware BDC version 15 onwards will work. Something about some options that need it to be CAN3 equipped.

@mk2016og 4 ай бұрын

If I already have LED headlights would I still need to get all modules or just the headlights?

@DanielSarvari 28 күн бұрын

Yes 💯! The modules are not cross-compatible. Check out the description for the modules part numbers…

@NickiNowotny 4 ай бұрын

Hey - thank you for this. Would you be able to tell me the size of the tool you used on minute 2:10? Thank you!

@DanielSarvari 28 күн бұрын

From memory it’s a 10mm socket with a ratchet.

@ovfbekw5467 3 ай бұрын

Love the look, but I’m curious what the coding does? When you code it is it just clearing the code or do you have to be a specialized coder ?

@DanielSarvari 28 күн бұрын

A lot more than that. It would not work without coding. When the computer off this car came out from factory these headlights did not exist yet. So you are coding it in new… there are so many people doing this for a living and they can do it remotely.

@ovfbekw5467 28 күн бұрын

@@DanielSarvari I have bimmercode expert mode, is that enough ? And if not where do I contact these people to do it for me

@DanielSarvari 28 күн бұрын

No, that’s not good for deep coding. E-sys has to be used which is the bmw engineering software. Search for the Mini F56 Forum, thread “F56 LCI LED Headlights fit pre LCI cars” you’ll find all the info there and shout out for someone that can code it for you…

@ovfbekw5467 15 күн бұрын

@@DanielSarvari so I’m at the coding part now, who did you contact to do this for you? Any reputable people you know ?

@DanielSarvari 15 күн бұрын

@@ovfbekw5467 nobody in particular. Did you try in that forum? Or ask in F56 Facebook groups.