Mini cooper S wastegate vacuum lines

  Рет қаралды 23,830

joey mtnjunkie puig

joey mtnjunkie puig

Жыл бұрын

2009 mini cooper s r56/r57 n14 engine vacuum to wastegate/ actuator lines diagram. hope this helps!!!

Пікірлер: 22
@user-cy8pp7bt6s
@user-cy8pp7bt6s 4 ай бұрын
Thank you so much for this video. I am basically rebuilding my engine right now, because it decided to blow up my turbo, not the engine, and I remove the exhaust manifold, and there was this tube, I didn't know where it went, and I watch this video, and you help me out, find where I went, so thank you very much for not giving me a panic attack.
@CLAUDIOILTEXANO
@CLAUDIOILTEXANO 8 ай бұрын
This is gold !! Thank you very much ! I love the zip ties to secure those lines . I'll do that on my R56 n18 tomorrow
@kenteichmann8292
@kenteichmann8292 8 ай бұрын
Good clear photography and well defined descriptions. A must see for r56 owners
@peterabrego2895
@peterabrego2895 3 ай бұрын
Thanks so much brother this is exactly what I need to put back the vacuum lines.
@brucewayne9412
@brucewayne9412 3 ай бұрын
I've been looking everywhere for this thank you so much!!
@seanmichael374
@seanmichael374 Жыл бұрын
Exactly what I was stuck on. Thank you. And I somehow how one extra nut; one extra 10 bolt and an 8 bolt. Now the fun part of figuring were those belong
@mini_special
@mini_special 5 ай бұрын
Thanks for doing this video, helped me a lot. It was exactly what I needed
@bigzman143
@bigzman143 6 ай бұрын
Great vid n alot of help. Thank you
@user-yn7wo3ux5f
@user-yn7wo3ux5f 10 ай бұрын
could you tell me if it makes a difference if the main vacuum line and the one to the actuator get swapped around.. Is this simply a vacuum chamber that they plug into
@olipessino6294
@olipessino6294 Жыл бұрын
Thanks man helpful video 👍
@joezyamahar1
@joezyamahar1 Жыл бұрын
Very welcome!
@christrites4251
@christrites4251 Ай бұрын
Thx, I was wondering where the hell the wastegate was...
@AIRCOOLEDLIFE
@AIRCOOLEDLIFE 6 ай бұрын
HELLO, good information thanks. How do you like the MAMBA turbo? Are you tuned for it and if so what's your HP?
@rajivr104
@rajivr104 4 ай бұрын
Thanks bro.
@Globbs
@Globbs Жыл бұрын
How did it do? Did the motor stay in one piece?
@joezyamahar1
@joezyamahar1 Жыл бұрын
Yes
@AndreaArd
@AndreaArd Жыл бұрын
What's your take on that Mamba turbo upgrade? Yay/Nay?
@joezyamahar1
@joezyamahar1 Жыл бұрын
Absolutely love it! Best upgrade with the tune. Currently at stage 3 at 25lbs of boost
@AIRCOOLEDLIFE
@AIRCOOLEDLIFE 6 ай бұрын
​@joezyamahar1 Is that on stock internals? Where you get your tune? I have the Mamba turbo also😊
@single_cam9199
@single_cam9199 2 ай бұрын
Have you eliminated the vacuum box at all and just ran the vacuum line to the solenoid like an actual traditional turbo setup? My stupid hoses keep popping off on highways going upgrade 🗻 Reason I ask is because im under the assumption that that reservoir is there because the vaccume pump pulls more inhg that what a car can do itself and that box brings it to a balance. Its so fucking stupied that there’s no nipple at the ends of the barbs on the vaccume resivor so the stupied hose doesn’t come off and so you can put a zip tie or hose clamp on the stupied thing. But know that I think of it Evan more it has dot airline shoved into a 2 inch hose that gos to the Resivor so the nipple grabs probably wouldn’t do anything anyways. Idfk mannn jbweld around dot airline fittings to the box and solenoid to just run hard lined I think Because every barb that the vaccume lines run too are different fucking sizes bro like a 2 year old designed this shit so Evan running real rubber vacuum lines instead of that NOODLE SHIT wouldn’t work just because of that
@thecocofury7241
@thecocofury7241 2 ай бұрын
Hi, I'm having the exact same issue, car through a check engine light on Monday, and after loads of investigation I have found both the lines have come off the vacuum chamber, did you figure out a way to keep them attached despite the lack of any barbs?
@single_cam9199
@single_cam9199 2 ай бұрын
Hey I looked mine over every was connected started it following days it was fine? Pile of shit.
How to rebuild the vacuum pump on a Mini Cooper S R56 (N14)
12:37
Project Mini
Рет қаралды 16 М.
Задержи дыхание дольше всех!
00:42
Аришнев
Рет қаралды 3,6 МЛН
КОМПОТ В СОЛО
00:16
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 31 МЛН
Iron Chin ✅ Isaih made this look too easy
00:13
Power Slap
Рет қаралды 36 МЛН
2008 MINI Cooper S - Vacuum Pump Replacement
7:40
Jeff Causey
Рет қаралды 74 М.
Remplazar intake manifold de mini cooper turbo
4:41
MkNk FACIL
Рет қаралды 25 М.
Vacuum Operated Wastegate/Turbocharger Setup
12:58
jmturbocoopers
Рет қаралды 78 М.
MINI COOPER 1.6 THP CODIGOS 28AA  2B64 PIERDE POTENCIA EN ACELERADAS BRUSCAS
16:45
LEONARDI high performance
Рет қаралды 33 М.
Mini Cooper low boost repair
1:39
Turbo Lab America
Рет қаралды 31 М.
Mini Cooper S R56 N14 PCV Valve Cover Fix (for non-genuine)
12:40
How to clean the carbon on the intake valves on a 2011 Mini Cooper S
17:13
Maic Salazar Diagnostics
Рет қаралды 125 М.
Задержи дыхание дольше всех!
00:42
Аришнев
Рет қаралды 3,6 МЛН