Mini Lathe - drilling without drill

  Рет қаралды 345,931

random technician

random technician

Жыл бұрын

A few weeks ago I got some used micro boring bars. With them it's possible to make holes without drilling before. In this video I make a mount for the micro boring bars and test it.

Пікірлер: 106
@johncharleson8733
@johncharleson8733 Жыл бұрын
Love the video--no music or hoopla--very relaxing.
@Jeff-zc3wl
@Jeff-zc3wl Жыл бұрын
I've used mini bars like these for years at my work, but never thought to try one without drilling a hole first. Well done, Sir!
@randomtechnician
@randomtechnician Жыл бұрын
Thank you!
@bokor2727
@bokor2727 10 ай бұрын
The tool looks like a typical mini boring bar from ph HORN. I admire the willingness to make your own frames, although they are available in several sizes. From an economic point of view, making a hole in this way is a big waste of time, especially when you need to make a deeper hole, in a harder material and in addition in a series of, for example, 1000 parts, but the idea itself is very positive in terms of a DIY enthusiast.
@MASI_forging
@MASI_forging Жыл бұрын
Profestional friend. Yoy did very well. Great job.
@randomtechnician
@randomtechnician Жыл бұрын
Thank you very much!
@cvz8849
@cvz8849 Жыл бұрын
Subscribed! Wonderful video, thank you
@randomtechnician
@randomtechnician Жыл бұрын
Thank you very much!
@edmedlin2936
@edmedlin2936 9 ай бұрын
Another great video! You do good work.
@randomtechnician
@randomtechnician 9 ай бұрын
Thank you!
@kylewatson6739
@kylewatson6739 Жыл бұрын
I love this format of video no bullhit just straight up good machining work and its kinda like an ASMR for dudes that love shop work like myself lol great video!
@randomtechnician
@randomtechnician Жыл бұрын
Thank you very much!
@luismontesinos2734
@luismontesinos2734 Жыл бұрын
Fantástico y preciso me encanta Gracias 🙏
@paullehmor982
@paullehmor982 Жыл бұрын
I bought a similar second hand set from Bengs. I think the brand is Paul Horn. A new set is very expensive! They work wonderfully, but I got serious chatter on tin bronze which is rather hard and brittle. These tools are normally used with internal cooling in CNC machines, behind a screen. Be careful not to crash them. Flying carbide fragments can penetrate the body. They need some sharpening on a diamond wheel after a while. Maybe I will build a simple tool grinder.
@randomtechnician
@randomtechnician Жыл бұрын
Thank you very much for the good tips! I have a Diamond wheel for a dremel engraver which i use for the sharpening of tungsten electrodes. I will try this if it becomes necessary.
@vladoodalv1102
@vladoodalv1102 Жыл бұрын
AqqqaqaqQQqaaq
@wilfriedhautel2131
@wilfriedhautel2131 Жыл бұрын
Qq
@wilfriedhautel2131
@wilfriedhautel2131 Жыл бұрын
@@randomtechnician KÄRCHER defekt
@randomtechnician
@randomtechnician Жыл бұрын
@@wilfriedhautel2131 No,works fine 😅
@Bianchi77
@Bianchi77 Жыл бұрын
Nice video, thank you for sharing it :)
@randomtechnician
@randomtechnician Жыл бұрын
Thank you!
@Armanufacturingskills
@Armanufacturingskills Жыл бұрын
Nice video
@TangThanh-ow8uz
@TangThanh-ow8uz 11 ай бұрын
Mình rất thích khi được xem bạn chế biến món đồ trên các máy công nghiệp. Chúc bạn luôn được bình an, nhiều sức khỏe và tràn đầy niềm vui trong công việc nhé 💞👍
@Armanufacturingskills
@Armanufacturingskills Жыл бұрын
Good work
@randomtechnician
@randomtechnician Жыл бұрын
Thank you very much!
@machinist_matt
@machinist_matt Жыл бұрын
I use these tiny boring tools on my micro lathes, they're excellent! I prefer the Sandvik and Iscar branded ones because they have an ordinary round shank which makes things much easier. 👍
@randomtechnician
@randomtechnician Жыл бұрын
Thank you for the tip, i will look at that
@1crazypj
@1crazypj Жыл бұрын
I'm not sure if it's a problem or advantage to have round shank boring bars? Sometimes you want to change top angle so you can rotate them in holder but other times they can be a pain to get 'dead level'
@machinist_matt
@machinist_matt Жыл бұрын
@@1crazypj Some of them have a flat spot on them to make leveling easy. 🙂
@olivvapor4873
@olivvapor4873 9 ай бұрын
Good to know … what is the name of these tools for the search fonction please ? 😊
@machinist_matt
@machinist_matt 9 ай бұрын
@@olivvapor4873 Iscar picco 👍
@PHIL5750
@PHIL5750 4 ай бұрын
Horn bores you can have coolant running through them used many of these very good for a finish turn brings out a good finish if used properly
@randomtechnician
@randomtechnician 4 ай бұрын
Yes, i know ;)
@se38005
@se38005 Жыл бұрын
12:40 I have he same set of drills and taps, bought mine at Lidl 😀
@randomtechnician
@randomtechnician Жыл бұрын
I dont't even know where i got this. 😅
@OWSNubbles
@OWSNubbles Жыл бұрын
Very fun! That is the cutest little multifix-style toolpost. What size is it, AA?
@randomtechnician
@randomtechnician Жыл бұрын
Thank you, yes it's AA
@antoniojosefdzotero2738
@antoniojosefdzotero2738 Жыл бұрын
Es bueno, asta para hacer fresado y roscas
@JanBinnendijk
@JanBinnendijk 5 ай бұрын
Je kan inderdaad in veel gevallen met een Boorbaar een gat maken zonder voor te boren. met een 12 mm Iscar boorbaar met wisselplaatjes gaat het ook.. Je hebt deze boorbaartjes gekregen schreef je, er bestaan er ook met gewoon een Cilindrische schacht, dus volstaat in dat geval een gaatje boren en daarna ruimen voor een goede passing, en dat zal een stuk stabieler zijn dan dit gat, de achterkant van deze boorbaartjes heeft een schuine kant, die kun je gewoon af laten steunen op een klein Paspennetje dat je dwars door je houder perst, en dan heb je meteen een diepteaanslag Als je een slijpmachine met Diamantschijf hebt, kun je ze ook zonder al te veel moeite zelf slijpen uit versleten of gebroken freesjes van VolHardmetaal, werkt perfect, ik maak zelf ook zo mijn boorbaartjes, en gebruik ze in Titanium
@Jack79439
@Jack79439 Жыл бұрын
Top
@randomtechnician
@randomtechnician Жыл бұрын
Grazie mille!
@fabientuizat1129
@fabientuizat1129 Жыл бұрын
merci de ce partage ..
@randomtechnician
@randomtechnician Жыл бұрын
merci
@1crazypj
@1crazypj Жыл бұрын
Neat tool holder but are the mini indexed boring bars cheaper than a drill of same size? I like what you made and could possibly have a use for it but I think I'll stick with conventional drill bits and boring bars
@randomtechnician
@randomtechnician Жыл бұрын
No, the advantage is that you can make very precise holes with any (small) diameter, but i also would suggest to drill before, so the boring bar works much smoother
@howardosborne8647
@howardosborne8647 7 ай бұрын
@@randomtechnician I use these type of carbide bars when making bush bearings for model engines. You can get them right down to 3mm diameter which makes it easy to bore precise bronze main bush bearings dead on size.
@sergeyzhukov3422
@sergeyzhukov3422 Жыл бұрын
Половина видео про изготовление квадратного проката из пластины :)
@rubinelemoura593
@rubinelemoura593 Жыл бұрын
Boa noite amigo muito bom este ferramenta grande abraço amigo fica com Deus 👌👍👊🥰
@randomtechnician
@randomtechnician Жыл бұрын
Muito obrigado!
@magiaycia
@magiaycia Жыл бұрын
Buf!! la precisión brilla por su ausencia!!, la herramienta te canta como una campana a pesar de ponerle una chapa, teniendo comparador, has metido el latón a las bravas, además no veo el motivo de castigar a la herramienta sin un taladro previo, en mi taller no te contrataba con esas referencias, aunque yo me dedico a la industria del molde y es muy exigente
@chalecalmala387
@chalecalmala387 Жыл бұрын
Como dicen en mi Pueblo: "mucho circo para una maroma"
@kgregory666
@kgregory666 4 ай бұрын
I did this on accident a couple of years ago on a citizen swiss lathe. The drill broke on a copper job and the ph horn boring bar kept making holes. I couldnt believe it.
@lohikarhu734
@lohikarhu734 Жыл бұрын
btw, where did you get that marking/measuring tool?
@randomtechnician
@randomtechnician Жыл бұрын
Do you mean this?: www.contorion.de/p/holex-streichmass-mit-flachem-schieber-c85173285?$ps=1&measuring_range_max_mm=250&simple_sku=58134045
@ingvarbergstrom7260
@ingvarbergstrom7260 4 ай бұрын
I can't help it but wounder if boring via the tailstock gives better precision. At least on a mini-lathe where cross-slide is so unstable, or........
@stewanish
@stewanish Жыл бұрын
Hi I noticed most of your machine tools come from EMCO. Possible to have a workshop tour in future video? Thanks.
@randomtechnician
@randomtechnician Жыл бұрын
Hi, not planned yet, but possible yes. I like the old Austrian machines. They are from the early 80s.
@stewanish
@stewanish Жыл бұрын
@@randomtechnician Me too was a trained toolmaker in the 80s then we used Deckel and Aciera mill. Then wanted to get an Emco lathe for hobby but way beyond my means :(
@stewanish
@stewanish Жыл бұрын
@@randomtechnician Hi me too trained as a toolmaker in the 80s. I think I have the manual of your Emco round column mill. If you need it PM over.
@randomtechnician
@randomtechnician Жыл бұрын
@@stewanish Thank you, i have it, too 😅
@laurentthommet8313
@laurentthommet8313 Жыл бұрын
Hello where do you buy thèse tiny tools? Greetings
@randomtechnician
@randomtechnician Жыл бұрын
www.bengs-modellbau.de/werkzeug/werkzeuge/mini-bohrstangen-zum-innendrehen?number=3692
@olegf8805
@olegf8805 Жыл бұрын
Unusual sharpening of the cutter. Why?
@randomtechnician
@randomtechnician Жыл бұрын
Do you have a timestamp for me?
@anthonylee2535
@anthonylee2535 Жыл бұрын
Why the 2nd angle at 9:20 is 30 degree? The mini bar angle is 40 degree (at 7:52) , and you set the 1st angle is 20 degree (at 8:44), then the 2nd should be 20 degree. What am I missing?
@randomtechnician
@randomtechnician Жыл бұрын
It's the other side of the vise-scale, 50 degree is zero here, so 30 is -20 degree.
@restorator2635
@restorator2635 Жыл бұрын
Привет! Можешь снять видео про фрезерный станок? Это emco fb-2?
@randomtechnician
@randomtechnician Жыл бұрын
Да, это 40-летний FB2, может быть, я сделаю видео, что вас особенно заинтересует?
@wotan308
@wotan308 11 ай бұрын
2 drill holes in the right size works also and is much faster to made…….
@giannimassarenti7808
@giannimassarenti7808 Жыл бұрын
Avete visto che per fresare il parallelepipedo stretto in morsa , vengono usate quelle che vengono chiamate "parallele" ? ( devono essere di acciaio temprato ) Ebbene , quella fu una invenzione di un mio amico , Beraglia Elio , fresatore stampista provetto , nell'anno 1968 circa nella ditta di Coppo Andrea (stampi) ; tempi di grandi inventi .
@stalinesssteel4256
@stalinesssteel4256 Жыл бұрын
почему их надо закаливать? Там нет НИКАКИХ усилий после зажатия тисками. Их можно даже из картона сделать, если эта точность будет желаемой
@giannimassarenti7808
@giannimassarenti7808 Жыл бұрын
Queste parallele , vengono sottoposte a duro lavoro di compressione perché il pezzo da serrare in morsa , viene cacciato contro le parallele, dal martello di piombo, per ottenere una perfetta aderenza contro le parallele che stanno sotto , in maniera che non si devono muovere/muoversi ; parliamo di 0.01 centesimo di millimetro max , in orizzontale . @@stalinesssteel4256
@stalinesssteel4256
@stalinesssteel4256 Жыл бұрын
@@giannimassarenti7808 "тяжелая работа по сжатию" с применением молотка нужна только для расположения заготовки максимально близко к параллелям. Если посчитать удельное давление на параллели со стороны заготовки во время ударений молотком, то станет известно, что эти удары распределяются по плоскости прикосновения заготовки и параллелей, и являются очень слабыми даже для дюралюминия, не только для простой стали и тем более закаленной. А губки тисков работают вообще в другой плоскости, в которой как бы Вы не прижимали деталь к параллелям, днталь все равно смещается, пусть и незаметно. Так что закалка - мера избыточная и бесполезная
@giannimassarenti7808
@giannimassarenti7808 Жыл бұрын
Mi dispiace ma LEI non non faceva punzoni e matrici per stampi ma , noi si .
@rrickyx
@rrickyx Жыл бұрын
Sig. Gianni lei mi ha aperto dei ricordi della mia prima gioventù meccanica... le attrezzerie di costruzione stampi, trancia forma lamiera, rettifica con mole a profilo, punzoni, matrici, acciaio temperato, guide... un mosaico meccanico, forse precisione superiore, la si trova nella F1 e in aeronautica, ma tutto nasce dalle macchine utensili. Mi parli del suo amico Andrea, omonimo di un mio... Non sapevo avesse inventato lui gli "spessori".
@kylebennett3073
@kylebennett3073 3 ай бұрын
What is that measuring tool callled that you use to layout
@randomtechnician
@randomtechnician 3 ай бұрын
It's called measuring gauge or marking ruler with flat slide(Streichmaß in germany) i use this one: www.contorion.de/p/holex-streichmass-mit-flachem-schieber-c85173285?q=streichmaß&$ps=1
@user-zs7fg6zo2h
@user-zs7fg6zo2h Жыл бұрын
И что я посмотрел ? И для чего ?
@randomtechnician
@randomtechnician Жыл бұрын
Расточные оправки для выполнения точных отверстий любого диаметра
@CMAenergy
@CMAenergy Жыл бұрын
A side is not an end
@user-xf4ib7gu6p
@user-xf4ib7gu6p Жыл бұрын
Расточка это не сверление.
@2012PACCBET
@2012PACCBET Жыл бұрын
что за перевод? Наверное должно быть "Мини токарный станок - сверление БЕЗ СВЕРЛА"
@randomtechnician
@randomtechnician Жыл бұрын
Точно
@delmarmorschel458
@delmarmorschel458 Жыл бұрын
Bom dia. Tens placa Pead 15mm inteiras. Qual o preço. Obrigado.
@randomtechnician
@randomtechnician Жыл бұрын
Boa noite, não somente sobras
@jesusrenatoramadevillavice4781
@jesusrenatoramadevillavice4781 11 ай бұрын
Este tornero es niña tiene las uñas muy limpiezitas y arregladas
@guerrilheiro54
@guerrilheiro54 9 күн бұрын
Onde vende esse kit???
@randomtechnician
@randomtechnician 3 күн бұрын
Eu só construí uma, peguei as barras chatas daqui: Só construí uma, tirei daqui as barras chatas: www.bengs-modellbau.de/Mini-Bohrstangen-zum-innendreh/36941?
@christianlaurent9326
@christianlaurent9326 Жыл бұрын
mini tour - perçage sans perçeuse mais pour réaliser les outils faut un tour a métaux MDR!!!!!!!!!!🤔🤔🤔🤔🤔🤔😚😚😚😚😚😚😚
@user-ww1sv3uk8b
@user-ww1sv3uk8b 11 ай бұрын
Бронза то клас,а сталь так слабо ? Покажи.
@aligonzalez5289
@aligonzalez5289 9 ай бұрын
Te voy a dar un "like", pero en este tema soy un neófito. Tantas máquinas me atolondran. Prefiero las cosas menos sofisticadas. Gracias.
@randomtechnician
@randomtechnician 9 ай бұрын
Gracias
@MF175mp
@MF175mp Жыл бұрын
Try exciting bars next time
@randomtechnician
@randomtechnician Жыл бұрын
🤣
@jaimealban4605
@jaimealban4605 Жыл бұрын
????????
@randomtechnician
@randomtechnician Жыл бұрын
???
@user-lz2kr2yx4e
@user-lz2kr2yx4e 11 ай бұрын
Непонятно ,что пытается изготовить автор видео
@bendiclub
@bendiclub 4 ай бұрын
Зачем так называть ролик,
@moulyjeanlouis7302
@moulyjeanlouis7302 Жыл бұрын
le titre est faux!! un perçage sens perceuse!!!c'est quoi si ce n'ai pas une perceuse le tour!!!
@wilhelmnelles5398
@wilhelmnelles5398 Жыл бұрын
Schuster....völliger Mist!
@bobuk5722
@bobuk5722 Жыл бұрын
Bored.
@randomtechnician
@randomtechnician Жыл бұрын
Thats the problem with boring bars 😅
@makkeymann
@makkeymann 9 ай бұрын
А где тут мини токарный станок?
@jarekjarek9557
@jarekjarek9557 Жыл бұрын
he video can be, but you would cut those claws ... ughjjjj
This innovative lathe tool is not shown in any school
25:02
Mekanik Mesin
Рет қаралды 126 М.
ТАМАЕВ vs ВЕНГАЛБИ. Самая Быстрая BMW M5 vs CLS 63
1:15:39
Асхаб Тамаев
Рет қаралды 4,3 МЛН
Which one of them is cooler?😎 @potapova_blog
00:45
Filaretiki
Рет қаралды 10 МЛН
Let's face it, no one does this on the lathe.
38:51
NBR Works
Рет қаралды 145 М.
The most used tool in the world !!!!!
8:10
بيت الهيدروليك & Hydraulic house
Рет қаралды 1,4 МЛН
Turning Broken Drill Bits Into Lathe Tools
10:40
Artisan Makes
Рет қаралды 117 М.
Mini Lathe - simple carriage stop
28:20
random technician
Рет қаралды 33 М.
How to make barrel rifling from old steel bolts
19:25
Mekanik Mesin
Рет қаралды 2,3 МЛН
Genius innovations and tricks you've never seen before
17:50
بيت الهيدروليك & Hydraulic house
Рет қаралды 827 М.
Fixing Everything Wrong With My Mini Lathe
13:52
Camden Bowen
Рет қаралды 269 М.
Making a BOLT ACTION Pen || INHERITANCE MACHINING
17:58
Inheritance Machining
Рет қаралды 2,9 МЛН
The Infamous Mini Lathe!
28:19
This Old Tony
Рет қаралды 5 МЛН
How to make high-quality hand thread tap(don't forget the like)
24:11
Master mind
Рет қаралды 1,4 МЛН