【ミニ四駆】How To Break-In a Double Shaft Motor

【ミニ四駆】How To Break-In a Double Shaft Motor - Complete Tutorial

Рет қаралды 10,177

5 ай бұрын

#ミニ四駆 #モーター慣らし #MachdashPro
Hi Guys, this is my Break-in tutorial for Dual shaft motors like Machdash Pro or Hyperdash Pro motor for your mini4wd car.
Visit the Mandai Circut KZfaq channel "たったやべえCHANNEL"
/ @kagaman-mini4wd
46th Imajin Cup
• [ミニ四駆]第46回ゐまじんカップ
Other Break-In Procedure Video
• 【ミニ四駆】Japan Cup 2023 モ...

Пікірлер: 69

@gusinigo4462 2 ай бұрын

Salamat ulit sir

@_S_K_Y_SaMuRa1_ 18 күн бұрын

Thank you for sharing your ways on breaking in, seems like the Charsoon Antimatter is sold out and or discontinued is there other machine you can suggest?

@keekyung3734 4 ай бұрын

How do you install a metal needle tip on WD-40?

@thesikadchronicles385 2 ай бұрын

Sir, specific ba yang smart charger brand na yan na may “motor break-in” setting o kahit anong smart charger pwede? May smart charger kasi ako e.

@jbfranco999 4 ай бұрын

anu po gamit niug chemical oil?

@arueltagalog3168 5 ай бұрын

tutorial po on how to make from at for ms chassis. thanks

@KonzTech 2 ай бұрын

Hi sir. Question po sa motor. Bawal po ba ultra dash sa bmax? Wala kasi akong nakikita na naka ultra dash na bmax

@crissagun3819 4 ай бұрын

Sir, pwede mo ba ako bigyan Ng tips, bago lng ako mag built bmax, Meron na akong Mach frame at geo glider, set up n lng kulang .

@louiebanal6421 2 ай бұрын

Ano po kahandahan ng na break in na motor bukod sa bumilis?

@miguiopena6755 5 ай бұрын

sir mach dash pro is also good for bmax? or hypder dash lang pwede? hehe

@minivictorydonkey 4 ай бұрын

MDP is good to use too, medyo malakas nga lang

@jokotriyono8064 4 ай бұрын

Hello . Recommended oil brekin sir?

@minivictorydonkey 4 ай бұрын

Some oil released by Tamiya can be usefull and effective too. Try experimenting also what is available in your place.

@jokotriyono8064 4 ай бұрын

@@minivictorydonkey Thanks sir. Good day

@xiaofengchang4437 4 ай бұрын

Hi sir I am wondering how to check the vibration of the motor

@minivictorydonkey 4 ай бұрын

Just feel it with your hands while it running, it's easy to tell which one vibrates alot

@wentiuy7248 4 ай бұрын

hello po yung haba pa ring ng build na ito ay 165mm pa rin?

@minivictorydonkey 3 ай бұрын

Hi, yes sir. It still passes the required lenght and overall clearances.

@avm2986 4 ай бұрын

Good day po. Ask ko lang san nyo na bili ung Antimatter ninyo? Pano po pag walang ganun anong alternative.

@minivictorydonkey 2 ай бұрын

Hi sir, try other brand like "Thunder" or "Reaktor"

@TamiyaSauce 3 ай бұрын

Sir anong name ng app yan gamit nyo for rph checker?

@Kylousz 3 ай бұрын

Giri: Rpm checker

@saxgame8174 12 күн бұрын

This method can Can it be used with a torque tuned motor?

@minivictorydonkey 8 күн бұрын

It can, but don`t give much effect and good result

@jordanepino474 5 ай бұрын

Baka naman sir may full details ka ng setup mo nito? Thank you and Best Regards!

@minivictorydonkey 4 ай бұрын

Yes sir, just tell me what setup or information you want to know. I will share it

@leyfchristian7059 Ай бұрын

Pano po break in kapag single shaft motor sir? Do you have a video po ba for that?

@jennikanovakk6752 3 ай бұрын

Ishikawa po to kuya ah ! Fukui area po ako 😊

@minivictorydonkey 3 ай бұрын

Wow, nice sir malapit lang

@samuelleonchengco1207 5 ай бұрын

anong gamit mong cleaner sir? pwede ba yung loctite? or mas ok kung wd40?

@minivictorydonkey 5 ай бұрын

Hi sir, Any cleaner will do, don't worry what brand to use. Just don't overdo the cleaning, it may affect the internal quality of the motors

@johnmichealmagallanes3451 10 күн бұрын

Senpai, Dito din ako sa Japan and gusto ko din po mag build ng open class yung MS Chasis po. Thank you senpai. Saan din makakabili ng tools dito ako bandang nagoya po.

@minivictorydonkey 8 күн бұрын

try to visit Fukushima Store or anything Mokei Store near you

@heijaydumdum7361 4 ай бұрын

sir baguhan lang po pwede po ba makabili sa inyo ng motor yung naka tune na po???

@minivictorydonkey 2 ай бұрын

Hi sir, not selling anything yet for now, sorry po😔

@Schjoenz 3 ай бұрын

Pwede ba sa lahat ng motor yan? Kasi yong tuned motors at stock motors wala yatang carbon brush? Gold thin brush lang yata at kung ganyan ang gagawin baka maputol na agad yong brush.

@minivictorydonkey 3 ай бұрын

I only recommend this procedure fo dual shafts and hd3 and powerdash. Each motor has its unique procedure depends on class and category. Giving more effectiveness and performance.

@MsBaboybaboy 20 күн бұрын

panu malalaman sir kung subrang ma vibrate ung MDP?

@bienamorpesa 5 ай бұрын

WD40 for deep cleaning? OK lang ba etong method mo idol across all motor types? salamat. more power to you idol!

@minivictorydonkey 5 ай бұрын

Thank you sir for comments This methods is effective eith hd3 and powrdash, but its fails sometimes with sprints and tuned type motors

@bienamorpesa 5 ай бұрын

Applicable din ba sa LD?

@mohdfarihan 2 ай бұрын

Only 36k rpm??

@kulasnicolas1359 4 ай бұрын

sir ask lang . mas okay ba 3.7 kesa sa 3.5 at 4.1 sa bmax setup ?

@minivictorydonkey 4 ай бұрын

Although I recommend 3.7:1 for bmax, of course you can change gear ratio depends on track layout

@jhadeanvlogs8601 Ай бұрын

Same procedure po ba sa Light Dash Dual Shaft?

@minivictorydonkey Ай бұрын

Hi sir, iba po procedure sa mga tuned type motor at light dash

@user-mc9nw7gk9s 4 ай бұрын

San k Japan sir new poh ako mini4wd 2 weeks plng

@minivictorydonkey 2 ай бұрын

Toyama sir🙂

@jbfranco999 5 ай бұрын

anu po gamit niung rpm app?

@minivictorydonkey 4 ай бұрын

Giri sir, its free to dowload

@leyfchristian7059 Ай бұрын

Kuys. May alam po ba kayong alternative or ibang brand na may featute pang break in gaya ng charsoon antimatter mo? Hehe. Been trying to search charsoon antimatter but it's nowhere to find 😅 Thankyou po 😊 more power!

@minivictorydonkey Ай бұрын

Thank you sir for asking. May ibang brand na kagaya ng mismo ng AntiMatter, "Reaktor" at "Thunder" po name nila

@leyfchristian7059 29 күн бұрын

@@minivictorydonkey ano po pwedeng alternative sir maliban po sa Thunder, reaktor at antimatter? Halos lahat sold out eh. 😅 hirap po makahanap haha

@skyl1ne199 5 ай бұрын

Hello sir, applicable po ba yung break-in method na ito sa single shaft motor?

@minivictorydonkey 5 ай бұрын

I only recommend for HD3 and Powerdash

@nasirdekboy2711 5 ай бұрын

@@minivictorydonkeyfor single shaft brek in dinamo still same ?

@Chillector 2 ай бұрын

Gusto ko po sana ulit mag start mag tamiya Kaso hindi ko alam kung Saan ulit ako mag umpisa haha

@minivictorydonkey 2 ай бұрын

Start sir with fma chassis, since ito ang popular sa bmax. Hindi rin sya expensive

@Chillector 2 ай бұрын

@@minivictorydonkey sorry sir boob question ulit. Yung gamit niyo sir Yung red Meron ba ganyan nabibili sa glorietta? Gusto ko po sana mag try ulit sana Kaso di ko alam Saan ako mag start haha

@Carrot747 4 ай бұрын

BREAK-IN naman po ng battery paano paabutin ng 1.52v fujitsu batts sa SKYRNC2200 charger po thanks in advance po

@minivictorydonkey 4 ай бұрын

Ok sir, will upload soon🙂

@user-mc9nw7gk9s 3 ай бұрын

Sagad n b un 34-35k rpm sa machdash

@minivictorydonkey 2 ай бұрын

Hi, Depende po, I usually measured from 2k to 5k rpm increase. In my personal xp, the best rpm with torque is from 34k to 38k. The higher the rpm the less torque.