V-TWIN Panhead engine ➜ bit.ly/3zaI4ZU NR200 8.6cc ➜ bit.ly/2WpF64Q

The engine's them selves didnt leak oil, they had an external drive chain oiler that dripped engine oil on the chain and it was adjustable. Awesome engine for sure.

the sound scales better than i thought it would. beautiful little thang!

WOW! Someone finally got a scale engine to actually look and sound like an engine! Now, if you can get it to leak reliably you will have created perfection! Well done mate! Cheers!

Harley spent a lot of engineering muscle to design an engine that sounds like it will die at any second while producing as much vibration as mechanically possible without falling apart.

my friends and i rode for years , i still have my flathead walla in the shed , 25 years ago we often discussed whether anyone would produce a harley miniture , reasoning it could be done as RC helicopter models were getting bigger and you could see it would be possible , amazed it took so long but great to see ,made my day , thanks for sharing

That would look SICK on the front of a Morgan!!

wow, der Sound ist wirklich cool. Da kommt tatsächlich ein "Harleyfeeling" auf.

Yesss. Shakes itself to death like the real thing. I love tractor engines.

It definitely sounds just like a mini version of a pan!👍🏻

That’s a beautiful work of art, can’t wait to see what you put that in. Very nice.

3:54 "And that's where you stick your shaft in. Stick it in there. And uh. You're good to go."

Bro wow !!! Ive been waiting for this oh my gosh I totally love that! Time to send this to my brap folks!!

That sounds absolutely amazing it sounds like a real Harley I've been doing have a great day

Wow !! My first bike was a 55 pan . This is Amazing !

Sounds real and has that lope. The mounting flanges are not tapped on originals, just bolts thru with spacers on the frame as needed. The engine mounts were bolts/nuts front and rear also with a skid plate.. I do like what they did for getting close to the original sound.

I’m loving these minis that work..from guns to engines I’m fascinated by this

Very nice!!! The sound of a Harley engine in a mega miniature scale is music to my ears❤️❤️❤️❤️❤️❤️

I love these miniture engines. Just amazing!

Yup, that is a Panhead. One of the better copies of one I've seen. Cool little motor.

nice movie great to the idea from start to finish well done

I had one , wish I had it back after seeing your quarter scale . Mine was full scale ninety eight cubic inch built by S&S motors exactly like yours . Enjoy , Thanks

That hole you pointed out as a possible starter mounting was actually the location of the generator on the older style Harleys. I rode Panheads for 10 years, m last on was a 1965 Electra Glide .The starter was mounted on a cast aluminum Primary cover and engaged with a flywheel on the clutch drum on the transmission.

super little work of art

Awesome man, what a great job you did

If gas prices keep escalating, we'll all be putting one of these gems in our CVOs!😂

That would be sweet in a custom large scale "Baja buggy" build.!

This lts about time for this nastalgick mini masterpiece to surface and become available to any and all quite beautiful very impressive "Old School"

I don't even have that motor in my Harley but just being a Harley guy that sound is unmistakable. They nailed it!

That’s awesome!

That is so freaking cool! Well done!

MIND BLOWING ! VERY VERY COOL 🤘

That is a work of art right there

Good vibrations dude! Pan head? May want to keep a shop towel under it if it’s based on the infamous pan head😂! What are you gonna put this in? Nice little kick scooter motor! Very nice brother!

YO that would look epic in a rc motorcycle!!!! And making an oil feed would be an interesting project.

That idle is impressive, I didn't expect it to be that authentic. Impressive.

I know a guy that built a v twin engine similar to this one years ago, but it don't sound like a harley. Yours does. Very cool 😎

this in a boat might be a new project for me, sounds awesome, would be great out on the water, just difficult to cool it

Sounds better then my 2021 107 Heritage Classic stock exhaust!

I LOVE THAT LITTLE V TWIN !!!

Every Harley Biker needs one of these, turn it into an alarm clock and you'll really have something!

Would be absolutely awesome to see this in a tiny little motorcycle or three wheeler type vehicle

These are so cool I have a 3 year old nephew that can already use tools i would love to get him some of these in a few years.

Looks like a cool desk prop 👍🏽

Really cool. Shakes and sounds just like my Harley, just smaller.

Damn I luv this⚡⚡👍would luv to c this mounted in some kind of frame to c what kind of speed it would reach

A living breathing mini pan. Now we got to build Stuart Little a real Panhead Bobber and get him a little leather vest- Starts grown up and joining a 1% club!!

Nice, it actually vibrates like a HD

It would be an absolutely SICK powerplant for an RC Morgan 3 wheeler.

Mate , this sounds and looks amazing! For it to be a true Harley ot needs to leak oil 🛢 😫 😆 🤣 . But you have definitely have a new subscriber. Good luck with this project 👍

Very simple carb. Cool

that is the cutest thing I´ve seen today!

greetings, from across the pond, over here in sunny Melbourne, Florida. I always wanted to build a little V-Twin, I was even going to try building one with a couple of five horsepower overhead valve lawn mower engines, I may still do that one....but, I can guarantee you that the motor you got there, probably cost almost as much as an actual V-Twin. yeah I'd love to know the price and the specs of this thing, how much power, etc. that thing's super cool. hey, one question. the engine didn't have enough fly wheel weight inside the crankcase, or is that just an extra flywheel on the outside, just too smooth it out on the stand? I'm sure I can help you figure out a clutch setup for that thing as well. just need to know the application, what you're going to put it in, and all..😎💯💯💯

That's awesome. The price they want for these things is insane though.

Very cool! It even sounds like a Harley!

What a stunner....wow

A miniature drip pan to go underneath would really be a nice touch

that would be perfect for a 3 wheel morgan build. maybe c channel rails, the power output would need to be 90 degrees then a chain to a fixed rear wheel, maybe some touring car a arms and steering and a body is gonna be hard but what about a plane model body cut down

The right video to watch while my Harley is stored away for winter.

Now THAT is sick!!!

do a drop tank hot rod three-wheeler from the 1950s 👍✌

Thankfully we can all now have good Japanese motors in our vehicles that run quietly, smoothly and reliably.

Awesome man

That is nuts

Does it leak oil like the original “Harley Davidson” too? 😂

Thats awesome!

absolutely awesome.

Now that is beautiful.

FREAKIN AWESOME!!!!

How cool is that :D Great sound

Awesome!

That’s amazing. Now all you have to do is make it leak oil from the primary cover located on the left of the engine because of bad seals or o-rings as well as make it leak oil from the drain plug and starter areas.

Man that’s SICK!!

Extremely friggin COOL!

This is amazing sick I want one

Sounds very similar to the Harley for sure. LOL that is nice.

Where you talked about mounting a starter is where the original 6 volt generator would mount. The very last year models were made with a 12 volt generator and only the last year had an electric starter that hooked onto the primary drive at the clutch/transmission location

Perfect H/D sound

PLEASE build a Morgan 3 wheeler that would be great and I've never seen something like that before

That is sick! If i had the extra i would...

That is cool!

Brilliant. Great vid!

It shakes wow.

That’s badass,you should make a knucklehead next you could amaze the world

Now you need a custom twin Harley Davidson exhaust 👍😂

Wow, realy cool 👍👍👍

Clutch goes on transmission jack shaft not on the engine. Built and rode my 65 panhead bobber many years ago. This brings back great memories thanks for posting

Nice sound

Very cool Very cool Do a Reverse trike with 60. Derometer tire With it pushing on the rear tire Was an air cylinder for adjustment for tension

Great!, would look super in a mahogany R/C chris craft, it does sound like the real thing!

Frickin cool man!

When I heard the sound and saw it vibrating. Wow that made me smile 😁 so cool. Thanks for posting.

Incredible workmanship.

Have to say that is so cool !

Super cool.

That's cool !!!

Rad little Panhead.

Nice mate. 👍🤠

That is very cool

When the RC threewheeler comes out...... holla.......🙃