'Gustav Barthel 300' Blowtorch | Restoration

  Рет қаралды 210,966

Mister Patina

Mister Patina

Жыл бұрын

Patreon: patreon.com/misterpatina
Instagram: misterpatina
Facebook: MisterPatina
I hope you have fun with the video! If you have any questions on the used tools, materials or the processes, write it in the comment section - i´ll try to answer as soon as possible!
If you want to support my channel hit the like, leave a comment, subscribe and share my work. It helps a lot! :-)
In this video I restored this old 'Gustav Barthel 300' Blowtorch. After purchasing the first test showed, that this old beauty still works a little bit. But the condition was pretty bad, so its time for a restoration.
I started with disassembling the whole Blowtorch. The tank was cleaned with paint stripper, and sandblasted afterwards. unfortunately i had to remove the old sticker as well. But i spray painted a new sticker with templates from my plotter. The whole paintjob was sealed in 2K clear coat.
After that the tank was done, i restored the brass parts. They were sandblasted with glass beads, after that i wirebrushed them with a brass wirebrush.
The last part was the type label. I removed the old paint, spraypainted the whole label in 2K black matte and engraved the original lettering with my laser.
The final test shows that this beast works perfectly fine now!
What is the small part in the nozzle for?
The small part AND the lever are a cleaning unit. At the tip of the small nozzle there was a little steel brush once. When hitting the lever, the brush cleans the nozzle. Unfortunately i couldnt remake this part.
How does this blowtorch work?
You start by hitting the pump for around 5-6 times. The pressure presses the gasoline at the top of the blowtorch. When preheating (what I did with a second Blowtorch), the gasoline transforms into gas. With the capillary effect new gasoline will be 'sucked' into the nozzles.
Without preheating things could end pretty bad, since the gasoline is still a liquid. it would splash burning gasoline around.
Brand: Gustav Barthel
Model: 0300
Time: around 1950
'Gustav Barthel 300' Blowtorch | Restoration
Thanks for watching!

Пікірлер: 389
@thecone87
@thecone87 Жыл бұрын
When Mister Patina and My Mechanics release videos one day apart from one another, it's a perfect weekend.
@misterpatina
@misterpatina Жыл бұрын
Thanks Colin! :-)
@carolinarlc7554
@carolinarlc7554 Жыл бұрын
👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼 🥂
@BuddyDanger
@BuddyDanger 5 ай бұрын
@@misterpatinaif you didn’t use Oxystrip and just blasted it would you get the same results. Letting a project sit for 28 days to strip off paint seems quite long, I love the way it came out!!!
@misterpatina
@misterpatina 5 ай бұрын
@BuddyDanger 28 days was just a joke (there’s a movie called '28 days later'). I use paint stripper before sandblasting, because I don’t want to have the paint particles in my sandblasting cabinet, nor in my lungs.
@BuddyDanger
@BuddyDanger 5 ай бұрын
@@misterpatina I thought 28 days was quite a stretch but I was like maybe there’s a secret!!! lol. Good job brother!!!
@misterpatina
@misterpatina Жыл бұрын
Hey folks, additional info: The small gear with the 'missing teeth' isnt broke, it was manufactured this way - these teeth are missing on purpose: otherwise this gear wouldnt fit into the housing. On the other hand it controls the "way" of the lever, so it only can make a 90° turn. Thanks!
@mdouglaswray
@mdouglaswray Жыл бұрын
Thanks! I suspected it was something like that since you cleaned it and made no further repairs.
@SachsVDE
@SachsVDE Жыл бұрын
I was just writting about that..😄 ,work safety ,Peace..✌️
@NTRprojects
@NTRprojects Жыл бұрын
Excuse me Mister P but you mixed up the franchise timeline. This is John Wick 2 - Return of the Firethread as John Wick appeard first in my train lantern resto. It seems that Keanu is working with different producers. Let's confront him together while having our next beer. The laser work is really really nice. Overall great job and satisfying video.
@misterpatina
@misterpatina Жыл бұрын
Iam really sorry - thanks for keeping things clear! And iam looking forward to the beer 😎
@NTRprojects
@NTRprojects Жыл бұрын
@@misterpatina 😅 no need to apologize, only shows we once again share the same "humor" 😘😘😘
@misterpatina
@misterpatina Жыл бұрын
@@NTRprojects 🫶
@saschma3543
@saschma3543 Жыл бұрын
Hab ich da Bier gehört? 🤣 schöne Arbeit wieder mal 👍
@cassandre4431
@cassandre4431 Жыл бұрын
Quand j'étais jeune. Je soudais le plomb avec des lampes à souder à alcool, comme celle ci, vous m'avez donné l'envie d'en restaurer une, il m'en reste 4ou 5 dans un de mes ateliers, en exposition 😀 Allé en avant pour un tit boulot Salut à tous 🖐️🇫🇷
@BB_Chaptsick
@BB_Chaptsick Жыл бұрын
Beautifully done, sir. It was interesting to see the brass wheel brush polish the brass nozzle assembly. The torch looks brand new. The stenciling and painting looked spot on. I suspect that’ll go on the self somewhere to be displayed.
@misterpatina
@misterpatina Жыл бұрын
Thanks a lot B! This is one of my favorite pieces and will get the extra high place in the display 🙂
@re-fix9678
@re-fix9678 Жыл бұрын
Good restore brother👍
@misterpatina
@misterpatina Жыл бұрын
Thanks bro!
@viktorbelikov721
@viktorbelikov721 Жыл бұрын
Nice sandblasting process! It works like only air, no dust. I restored Gustav Barthel on board the vessel and use handmade sandblasting camera (material plywood) - excessive dust. All your cinemas are very interesting and useful for beginners!
@mimibae_xo
@mimibae_xo Жыл бұрын
Beautiful restoration like always! Love your content, Mister Patina! ☺🤍
@misterpatina
@misterpatina Жыл бұрын
Thank you so much mimi 🙂🫶
@sebastianoguemmer2830
@sebastianoguemmer2830 Жыл бұрын
28 Tage Einwirkzeit für Farbentferner kann ich zwar nicht glauben aber trotzdem ein super ergebnis
@i.dont.sleep.9718
@i.dont.sleep.9718 Жыл бұрын
Thank you for helping me relax I'm stressed and you're videos help me ❤
@misterpatina
@misterpatina Жыл бұрын
You’re welcome! ❤️
@johnboyd6943
@johnboyd6943 Жыл бұрын
This genius never disappoints. I'm fascinated by his dedication and skill and to be truthful, somewhat jealous. Another highly enjoyable video. Thanks.
@misterpatina
@misterpatina Жыл бұрын
Hey John, thanks, I really appreciate! 🙂
@bolobre4th
@bolobre4th Жыл бұрын
Great restoration, as always. I'm yet to understand why old blowtorches were such complex mechanisms
@mdouglaswray
@mdouglaswray Жыл бұрын
Thank you SO MUCH!!!! I remember seeing these being used when I was a boy! My father was a plumber and this was what you used for brazing copper.
@misterpatina
@misterpatina Жыл бұрын
You’re welcome Doug! Iam glad you enjoyed! 🙂
@mdouglaswray
@mdouglaswray Жыл бұрын
@@misterpatina I JUST got the joke about the wick.... oy! lol
@johnmarquardt1991
@johnmarquardt1991 Жыл бұрын
I still have one of my fathers. I remember him using it in the 1950's and 60's until propane torches became available. Finally cleaning it up this winter, I hope.
@misterpatina
@misterpatina Жыл бұрын
Do it! 🙂
@Blade1310
@Blade1310 Жыл бұрын
"Movie Night" with Mister Patina. Great movie referenced humour along with another great restoration!
@misterpatina
@misterpatina Жыл бұрын
Haha, thanks! Iam glad you enjoyed!
@sleepytabby9113
@sleepytabby9113 Жыл бұрын
Another beauty restored. I loved the brass brush, never knew such things existed. ❤
@misterpatina
@misterpatina Жыл бұрын
Thanks Tabby 🫶
@CHEF1954
@CHEF1954 Жыл бұрын
Es ist mir immer wieder eine große Freude deine Videos zu schauen.. Mach weiter so!
@misterpatina
@misterpatina Жыл бұрын
Dankeschön :-)
@paulinobenito6905
@paulinobenito6905 Жыл бұрын
Cómo siempre, gran trabajo de restauración 👍
@anthonyalfieri927
@anthonyalfieri927 Жыл бұрын
Always great content! My wife and I love watching your videos. It helps us decompress after a horrendously long week. Keep it up!
@misterpatina
@misterpatina Жыл бұрын
Nice to hear, thanks! Greets to the wife 🙂✌️
@anthonyalfieri927
@anthonyalfieri927 Жыл бұрын
@@misterpatina Wife says hello! 😎
@DG-mi2mc
@DG-mi2mc Жыл бұрын
Got me thinking for a second, hmm why does he call it 'John' 🤔 Hmm, a wick, named John.. 😐🤣🤣🤣 Nice video, i like it👍
@misterpatina
@misterpatina Жыл бұрын
😄😄😄
@cangurel6249
@cangurel6249 Жыл бұрын
Mister Patina... I learn a new technique in each of your works and I improve my amateur works thanks to you. thank you so much my dear friend...🙏🙏🙏
@misterpatina
@misterpatina Жыл бұрын
Iam glad you like my work 🙂
@Jarost167
@Jarost167 Жыл бұрын
I just got myself a pretty much similar soviet blowtorch, now I'm gonna know how to restore it properly))) thank you very much for the video)
@misterpatina
@misterpatina Жыл бұрын
You’re welcome Beard! I wish you fun and success 🙂✌️
@little_grey_mouse
@little_grey_mouse Жыл бұрын
..lol “here’s the wick, I call him John!”
@Aleksander_Grigorjev
@Aleksander_Grigorjev Жыл бұрын
Greetings from Petersburg! That's what I like about old blowtorches? The fact is that they work completely cynically, disregarding the quality of fuel, weather and temperature conditions, the condition of the valve and nozzle. And they don't care about their looks. They. Just. Сontinue to work. What about modern blowtorches? Either the gasoline is not the same, then the pressure is low, then the nozzle is a little dirty, then the weather is cold / hot.. Sucks, not blowtorches. As for your work, my friend, I would be pleased to work with such a blowtorch. Health and peace to your family! 🤝🤝🤝
@jackalovski1
@jackalovski1 Жыл бұрын
This looks amazing. I love the paint and the restored brass
@misterpatina
@misterpatina Жыл бұрын
Thanks, iam glad you enjoyed!
@derangeded
@derangeded Жыл бұрын
Lots of respect for you and your work!
@misterpatina
@misterpatina Жыл бұрын
Thanks my friend!
@subramanianiyer2731
@subramanianiyer2731 Жыл бұрын
Amazing job. Like from India.
@Wombatantify
@Wombatantify Жыл бұрын
Love these videos! So satisfying, love your style and you are talented at what you do. Nice work!
@misterpatina
@misterpatina Жыл бұрын
Thanks Dan, I really appreciate!
@davidashmore3929
@davidashmore3929 Жыл бұрын
thanks for the restoration. Have a lovely day.
@markneo1
@markneo1 Жыл бұрын
Excelente trabalho. Parabéns 👏👏🇧🇷
@misterpatina
@misterpatina Жыл бұрын
Muito obrigado 🙂
@DrHutOfHandcraft
@DrHutOfHandcraft Жыл бұрын
🔥🔥🔥 Awesome work bro! Perfect paintjob and the laser is so cool 😄 Can’t wait to see the new shop!
@720ppixel2
@720ppixel2 Жыл бұрын
I think it would be nice if you show at the end the Work hours that you put in the Projekts
@mattholmes8214
@mattholmes8214 Жыл бұрын
So glad to hear that universal grunt when removing the top from the tank 😂
@misterpatina
@misterpatina Жыл бұрын
😄😄😄
@tommymorton4939
@tommymorton4939 Жыл бұрын
The second life for another tool. The most satisfying when a good old working instrument receives the second chance.
@misterpatina
@misterpatina Жыл бұрын
Thanks Tommy, iam glad you enjoyed!
@WinchesterxNL
@WinchesterxNL Жыл бұрын
HAAANNNZZZ!!!! GET US ZHE MINI FLAMMENWERFER!!!!! Seriously great work as always!
@misterpatina
@misterpatina Жыл бұрын
Haha!! Best meme on earth!
@tomswindler64
@tomswindler64 Жыл бұрын
Great video great restoration great content.you brought the torch back to life.very nice,cannot say anymore.keep it up.😎😎😎👍👍👍
@pascaljeske7307
@pascaljeske7307 Жыл бұрын
This is a very amazing Work Mal wieder spitzen arbeit heraus gehauen danke für das sehr tolle Video 👍❤️👍
@user-gv4tn9nb7f
@user-gv4tn9nb7f Жыл бұрын
Beautiful work!
@misterpatina
@misterpatina Жыл бұрын
Thanks!
@NHTGAMING2024
@NHTGAMING2024 Жыл бұрын
You are an artist my friend. Love your work.
@misterpatina
@misterpatina Жыл бұрын
Thanks Nachoboy!
@thierrymaggiorino3664
@thierrymaggiorino3664 Жыл бұрын
Colossal job !! 🛠️ 👌🏼 👍🏼... Very beautiful restauration.. 👍🏼👍🏼👍🏼... 👏🏼👏🏼👏🏼 Thank you so much for the partage 👍🏼 👏🏼 👏🏼 👏🏼...
@IvanKiev79
@IvanKiev79 Жыл бұрын
Отличная работа!!! 👍👍👍
@superdave6889
@superdave6889 Жыл бұрын
Mister Patina, you might be able to fabricate a cleaning brush for the torch out of a set of Carburetor Cleaning Brushes, they are used to clean carb jets, which are pretty narrow. try going down to your local auto parts store and ask about brass cleaning brushes for carburetor jets.
@misterpatina
@misterpatina Жыл бұрын
Dave, thats an awesome idea! Thanks!
@grimnir27
@grimnir27 Жыл бұрын
I like your adjustable wrench, but was surprised it wasn't a Hand Tool Rescue!
@evilsquirrel56231
@evilsquirrel56231 Жыл бұрын
Love it! Great work as always
@misterpatina
@misterpatina Жыл бұрын
Thanks Mile!
@streametal
@streametal Жыл бұрын
Awesome german machine !!
@carolinarlc7554
@carolinarlc7554 Жыл бұрын
John Wick and the Bakelite Boys sounds like a good jazz band! Thank you for that ever-present sense of humour.
@misterpatina
@misterpatina Жыл бұрын
Haha, thanks Carolina! And thank you so much for all of your support :-)
@willieckaslike
@willieckaslike Жыл бұрын
Fascinating ! Thank you for sharing.
@misterpatina
@misterpatina Жыл бұрын
Thanks 🙂
@Gonza768
@Gonza768 Жыл бұрын
Excellent work Mister Patina, one of the best restorations of you I saw, that laser machine Is outstanding. Greatings from Argentina.
@misterpatina
@misterpatina Жыл бұрын
Thanks you so much my friend! I really appreciate! Greetings from Germany! ✌️
@narcism2672
@narcism2672 Жыл бұрын
Nice restoration. Laser machine is very interesting... About how it is working the blowtorch: Start by put 5-6 pumps for pressure, as you said. To preheat the head, you must put a small quantity of gasoline in the "cup" under the head and ignite. After preheating, works as you said. This type of blowtorch use normal gasoline, for cars, which is not so light. That is why the head was covered in soot at the beginning...
@frfrpr
@frfrpr Жыл бұрын
Super filming. Thanks. That laser was awesome
@misterpatina
@misterpatina Жыл бұрын
Thanks :-)
@jeakim4152
@jeakim4152 Жыл бұрын
Wonderful job !
@jaisoncarvalho86
@jaisoncarvalho86 Жыл бұрын
IT WAS AMAZING!!!!!!!!!!!!
@RainWalking
@RainWalking Жыл бұрын
Incrediabley impressive.
@wobber999
@wobber999 Жыл бұрын
Another amazing job mr patina
@rpg2181
@rpg2181 Жыл бұрын
Another good restoration. Getting better and better.
@misterpatina
@misterpatina Жыл бұрын
Thanks!
@andreacrashe9894
@andreacrashe9894 Жыл бұрын
*Wow you are a very talented young fella... love your work.*
@misterpatina
@misterpatina Жыл бұрын
Thanks Andrea! 🙂
@andymiller5611
@andymiller5611 Жыл бұрын
That has turned out beautiful! Excellent video as always, dude! Well done! 🍻🤘💜
@misterpatina
@misterpatina Жыл бұрын
Thanks Andy! 🥳✌️
@lemagaou
@lemagaou Жыл бұрын
Thanks for keeping the casting marks. They're part of the manufacturing process, hence of the tool
@misterpatina
@misterpatina Жыл бұрын
You’re welcome!
@marklammas2465
@marklammas2465 Жыл бұрын
"I bumped into an old flame recently, and rediscovered the fire"...
@isi3978
@isi3978 10 ай бұрын
Excelente trabajo,un saludo desde España 🇪🇦
@restorerestoration4705
@restorerestoration4705 Жыл бұрын
Beautifully executed
@misterpatina
@misterpatina Жыл бұрын
Thanks buddy!
@restorationofdirty
@restorationofdirty Жыл бұрын
Amazing restoration project 🌹❤️‍🔥
@misterpatina
@misterpatina Жыл бұрын
Thanks buddy!
@fernandocastellano6704
@fernandocastellano6704 Жыл бұрын
Exclentent patina!!🙌🙌🙌 Beautifull restoration
@misterpatina
@misterpatina Жыл бұрын
Thanks!
@cesmorf5398
@cesmorf5398 Жыл бұрын
I am only satisfied regardless of whether it works or not, only action and sound are important
@andrewlee5948
@andrewlee5948 Жыл бұрын
That was super impressive. You’re a mad scientist 🤓!
@misterpatina
@misterpatina Жыл бұрын
Thanks!
@marianthelibrarian2274
@marianthelibrarian2274 Жыл бұрын
Excellent video, as always. Was not expecting lighter fluid as fuel.
@misterpatina
@misterpatina Жыл бұрын
Worked perfectly :-)
@josepinasco4305
@josepinasco4305 16 күн бұрын
Incredible!!!
@jfk52
@jfk52 Жыл бұрын
Super restauration !!! Bravo !!! 😀 👍
@misterpatina
@misterpatina Жыл бұрын
Thanks Pascal!
@yttwlouis.05
@yttwlouis.05 Жыл бұрын
I subscribed because of your collaboration video with my mechanics, it was really great, and this is awesome!
@misterpatina
@misterpatina Жыл бұрын
Thanks Louis! Iam glad you enjoyed!
@Ty3OpByH
@Ty3OpByH Жыл бұрын
Like and comment on this wonderful master.
@MarsRestorations
@MarsRestorations Жыл бұрын
We're doing movie references now?
@tombarlow6176
@tombarlow6176 Жыл бұрын
Lovely restoration of the torch
@misterpatina
@misterpatina Жыл бұрын
Thanks!
@54mgtf22
@54mgtf22 Жыл бұрын
Love your work 👍
@misterpatina
@misterpatina Жыл бұрын
Thanks buddy! ❤️
@tarkus3004
@tarkus3004 Жыл бұрын
I like your subtle jokes. Please more! ...I know it may be risky 🙂
@misterpatina
@misterpatina Жыл бұрын
😄😄
@dougieranger
@dougieranger Жыл бұрын
What a superb restoration!
@misterpatina
@misterpatina Жыл бұрын
Thanks!
@scottstump9163
@scottstump9163 Жыл бұрын
Very cool, great work
@harakatabdelmjid9449
@harakatabdelmjid9449 Жыл бұрын
votre travail magnifique
@TheSockMonkeyGuy
@TheSockMonkeyGuy Жыл бұрын
The Bakelite Boys sounds like a retro 1920s jazz band; perhaps a smaller version of Palast Orchester. I'd pay to listen to them! 😁 That laser is astounding. Looking forward to seeing what you do in the new workshop! 🙂🐵
@misterpatina
@misterpatina Жыл бұрын
Haha, yeah I thought the same! Thanks Martin, youll be updated...:-)
@ronnieahman6958
@ronnieahman6958 Жыл бұрын
Awesome restoration. Keep up the good work
@misterpatina
@misterpatina Жыл бұрын
Thanks Ronnie, I will!
@moomae1
@moomae1 Жыл бұрын
Laser is my favorite part really. Cool project! 😎
@misterpatina
@misterpatina Жыл бұрын
Thanks!
@martinpaulovic1110
@martinpaulovic1110 Жыл бұрын
Perfect work !!
@misterpatina
@misterpatina Жыл бұрын
Thanks Martin! 🙂
@churlepatakha
@churlepatakha Жыл бұрын
incredible work!
@misterpatina
@misterpatina Жыл бұрын
Thanks Shahid!
@irvhawke199
@irvhawke199 Жыл бұрын
Excellent restoration!!!!
@misterpatina
@misterpatina Жыл бұрын
Thanks Irv!
@vinceianni4026
@vinceianni4026 Жыл бұрын
Hello mister Patina beautiful restoration beautifully restored good job well done friend
@misterpatina
@misterpatina Жыл бұрын
Thanks Vince! 🙂
@andreacimolin7371
@andreacimolin7371 Жыл бұрын
...ottimo lavoro!
@SusanAmberBruce
@SusanAmberBruce Жыл бұрын
Amazing Job thanks
@TTFILTD88
@TTFILTD88 Жыл бұрын
Brilliant restoration
@misterpatina
@misterpatina Жыл бұрын
Thanks buddy!
@TheKertog
@TheKertog Жыл бұрын
Love the “John Wick” reference 😂 Awesome restoration Mr Patina.👍
@misterpatina
@misterpatina Жыл бұрын
Thanks my friend! 🙂
@jamesalsup9135
@jamesalsup9135 Жыл бұрын
Excellent!
@lancevanbeurden3184
@lancevanbeurden3184 Жыл бұрын
Could sell that back to the original manufacturer for their showroom! Awesome!
@misterpatina
@misterpatina Жыл бұрын
Haha, thanks! :-)
@stevejohnston5191
@stevejohnston5191 Жыл бұрын
Very cool … even with the giggle as the blowtorch was lit using a blowtorch.
@misterpatina
@misterpatina Жыл бұрын
Blowtorchception 😄
@RestoredChannel
@RestoredChannel Жыл бұрын
Nice work! Cool laser you got there😎
@misterpatina
@misterpatina Жыл бұрын
Thanks man!
@billakosl.a3227
@billakosl.a3227 Жыл бұрын
Perfect restoration
@misterpatina
@misterpatina Жыл бұрын
Thanks!
@misterpatina
@misterpatina Жыл бұрын
Thanks!
@adamweilergurarye5422
@adamweilergurarye5422 Жыл бұрын
Bravo!
@masby.gaming
@masby.gaming Жыл бұрын
John Wick 🤣🤣🤣 Love it !
@misterpatina
@misterpatina Жыл бұрын
🫶
@bobjoncas2814
@bobjoncas2814 Жыл бұрын
...lookin' good, nice job. keep well
@misterpatina
@misterpatina Жыл бұрын
Thanks Bob!
@ModyMody-vn9yg
@ModyMody-vn9yg Жыл бұрын
Well done 👍 Good work
@astroareus8572
@astroareus8572 Жыл бұрын
This is the channel i go to when i've finished watching all of the My Mechanics videos 😂
@misterpatina
@misterpatina Жыл бұрын
😄😄😄
@wileycoyotesr8623
@wileycoyotesr8623 Жыл бұрын
I envy you now having a working Gustav Barthel 300' Blowtorch. For years I've been hoping to find one and rebuild it.
@misterpatina
@misterpatina Жыл бұрын
I guess theyre more easy to find here in germany :(
@daddyfrost42
@daddyfrost42 Жыл бұрын
Awesome as always, brat. Keep it up!
@misterpatina
@misterpatina Жыл бұрын
Spasibo brate!
1930's Adriance Wrench | Restoration
19:46
Mister Patina
Рет қаралды 246 М.
Antique Blowtorch Restoration
23:20
LADB Restoration
Рет қаралды 3,3 МЛН
LOVE LETTER - POPPY PLAYTIME CHAPTER 3 | GH'S ANIMATION
00:15
ИРИНА КАЙРАТОВНА - АЙДАХАР (БЕКА) [MV]
02:51
ГОСТ ENTERTAINMENT
Рет қаралды 10 МЛН
Tom & Jerry !! 😂😂
00:59
Tibo InShape
Рет қаралды 62 МЛН
Blowtorch Restoration and Modification | Mister Patina
19:52
Mister Patina
Рет қаралды 196 М.
Antique "Ernst Leitz" Microscope Restoration - Shiny Brass Polishing
19:22
Rusty Handcranked Grinder Restoration | Mister Patina
16:03
Mister Patina
Рет қаралды 376 М.
HYDRAULIC PRESS RESTORATION
21:36
John Keys
Рет қаралды 6 М.
Antique Ratcheting Screwdriver Restoration | Mister Patina
15:40
Mister Patina
Рет қаралды 1 МЛН
Siphon bottle filler - Restoration
24:21
Veradona Restoration
Рет қаралды 65 М.
Antique Belt Lacing tool restoration
26:58
Random Repair and Restoration
Рет қаралды 53 М.
Restoration of an Antique Swedish Calculator (FACIT)
33:23
MY RESTORATIONS
Рет қаралды 41 М.
Large Lighter restoration with 24 Karat gold plating
18:58
Odd Tinkering
Рет қаралды 770 М.
Rusty 1950´s Camping Stove | Restoration
14:32
Mister Patina
Рет қаралды 580 М.
Парень со странностями помог мальчику 🥺 #фильмы #сериалы
1:00
DixyFilms - Фильмы и сериалы
Рет қаралды 3,2 МЛН
😨 24 ЧАСА чтобы найти школьную ПИЦЦУ
0:41
Настя, это где?
Рет қаралды 5 МЛН
Парень со странностями помог мальчику 🥺 #фильмы #сериалы
1:00
DixyFilms - Фильмы и сериалы
Рет қаралды 3,2 МЛН
Just a joke 😂
0:11
ARGEN
Рет қаралды 1,7 МЛН