Piaggio Fly - CVT Installation - variators, belt, rollers, clutch

Piaggio Fly - CVT Installation - variators, belt, rollers, clutch | Mitch's Scooter Stuff

Рет қаралды 1,301,127

9 жыл бұрын

In this video I show you how to install variators, rollers or sliders, drive belt and cover back together on Piaggio Fly scooter.
Dr Pulley Sliders - amzn.to/2GFUUCC
Drive belt: amzn.to/2Bsz0n3
**TOOLS I USED:
Torque wrench - 10-150 lb/ft 1/2 drive - amzn.to/2ysC3XS
#2 Phillips Screwdriver - amzn.to/2fgdZDL
Breaker bar 1/2 drive - amzn.to/2HenuMI
1/2 to 3/8 drive socket adapter - amzn.to/2xGFAUG
Ratchet 3/8 drive - amzn.to/2hhmnUs
19mm socket 3/8 drive - amzn.to/2CiXNqo
Ratchet 1/4 drive - amzn.to/2xcJEu1
3” / 6” extension set 1/4 drive - amzn.to/2wDuzzW
8mm socket 1/4 drive - amzn.to/2xMhsBl
A zip tie
Knife / scissor to cut off the zip tie's end
Bar - to lock the wheel
Variator / clutch bell holder - amzn.to/2YC8L6B
SHOP MY SCOOTER STUFF: amzn.to/2CbqQku
Want more free Scooter Tip / Tutorial videos - Please support MicBergsma!
Paypal donation: bit.ly/2fghrwN
IMPORTANT
Please only use and share this embed code of the original video.
Third party downloads and distribution is not permitted.
If you are interested in buying footage or for booking information please contact:
hire.micbergsma@gmail.com
*******************************************************
Website - bit.ly/2gvBRyI
KZfaq - 2nd channel - bit.ly/2g4i5d5
Instagram - bit.ly/2fB8gay
Facebook - bit.ly/2gEsYpt
Google Plus - bit.ly/2fPb423
******************************************************
Filmed by Mitch Bergsma
#mitchsscooterstuff #piaggiofly #cvt #scooter #tutorial #diy #howto

Пікірлер: 149

@johndoe-tk6en 2 ай бұрын

Thanks A LOT !!! I bought a 2010 Piaggio Fly from an elderly couple who'm used it on vacations only. 10k kms on it... On my first day to my work the belt got destroyed... Got new rollers, sliders znd a belt in 2 days and it back running in 3 hours. Thanks to you!

@allangilbert77 6 жыл бұрын

best visual guide i have ever seen

@Frari747 2 жыл бұрын

Absolutly!

@allans7281 4 жыл бұрын

Hi Mitch love watching your videos! they’re all very helpful and fun to watch happy riding!

@irfanmanij6111 4 жыл бұрын

F 1

@MitchsScooterStuff 6 жыл бұрын

Dr Pulley Sliders - amzn.to/2GFUUCC Drive belt: amzn.to/2Bsz0n3 TOOLS I USED: Variator / clutch bell holder - amzn.to/2YC8L6B Torque wrench - 10-150 lb/ft 1/2 drive - amzn.to/2ysC3XS #2 Phillips Screwdriver - amzn.to/2fgdZDL Breaker bar 1/2 drive - amzn.to/2HenuMI 1/2 to 3/8 drive socket adapter - amzn.to/2xGFAUG Ratchet 3/8 drive - amzn.to/2hhmnUs 19mm socket 3/8 drive - amzn.to/2CiXNqo Ratchet 1/4 drive - amzn.to/2xcJEu1 3” / 6” extension set 1/4 drive - amzn.to/2wDuzzW 8mm socket 1/4 drive - amzn.to/2xMhsBl A zip tie Knife / scissor to cut off the zip tie's end Bar - to lock the wheel SHOP MY SCOOTER STUFF: amzn.to/2CbqQku Want more free Scooter Tip / Tutorial videos - Please support MicBergsma! Paypal donation: bit.ly/2fghrwN

@muhammadsajeem5992 5 жыл бұрын

Mitch's Scooter Stuff

@gilmamoura8096 5 жыл бұрын

@complexi8692 7 жыл бұрын

Your vids helped me alot with my piaggio zip thx man.

@MitchsScooterStuff 7 жыл бұрын

Awesome! You're welcome!

@complexi8692 6 жыл бұрын

Do they have piaggio zip where u live ?

@blizzard8298 8 жыл бұрын

Very helpful. Thank you for putting that on line.

@marianezziii 9 жыл бұрын

Hello Mitch, i follow you from Italy and I want to compliment you for your tutorials! Can you tell me the difference between the stock rollers and the dr. Pulley? Thank you!

@davidsstfarrelltighe 4 жыл бұрын

Hey mitch just started watching you lately love the videos I recently just built my first motorcycle and now I want a scooter aswell and I'm blaming you 😂😂😂

@paulquiroz4070 4 жыл бұрын

Mitch, if it wasn't for your videos, I would no be able to work on my new scooter project. You are sooooo talented. Thank you

@johnfra74 5 жыл бұрын

👍 Se notan los dr.pulley? En qué? Qué peso tenían los que quitaste y lo de.pulley que pusiste?

@Rebuild-ub5cu 6 жыл бұрын

Thanks again for the clear, concise video. Much appreciated.

@MitchsScooterStuff 6 жыл бұрын

You're welcome!! 🙌🏼

@fishwithme1 4 жыл бұрын

This was one of the best videos I've seen I definitely subscribed to your Channel good job buddy

@MitchsScooterStuff 4 жыл бұрын

Thank you Richard!

@salingenier 4 жыл бұрын

Hi mitch, your videos so cool!,

@abangjoe 8 жыл бұрын

Thank you for sharing. I like your video, cos you don't need to talk too much to explain what is what and the visuals are self explanatory with minimal narrations needed.

@azeckhd524 7 жыл бұрын

Don't forget to add some copper grease to the bolts that you put into the CVT cover, you don't want that to rust.

@shashatheonly 5 жыл бұрын

Hey how heavy are the standard weights in the fly 125 ?

@muddybrudda5160 3 жыл бұрын

Hey mitch and tips on getting to the timing marks on these things? I need to reset a customers valves

@jimmys1219 4 жыл бұрын

Hey mitch slider and ball replacement should be same weight on stock ball? Planning to change from ball to slider

@coursespagnolgeneve2099 7 жыл бұрын

Hi Mitch! I love your videos! You do a great job! Would you please show us how to change the piston and cylinder on a fly 125? thanks a lot, Alex

@MitchsScooterStuff 6 жыл бұрын

Thank you so much! I will if there is one that need to be replaced I will make video about it.

@zannanurhawaazel1604 4 жыл бұрын

Mantaaap mas bro. Tolong dong. Skema pengapian motor bajaj pulsar

@honest3797 6 жыл бұрын

thnx your video helps us alot . please I have problems in my scooter there is many oil out from engine to the air filter can you tell me where its the problem.

@Cydro12 5 жыл бұрын

an engine builds up pressure in the oil resevoire (bottom of the engine), normally there is a hose which vents out to your intake or to the atmosphere which gets rid of the built up pressure, check if that hose isn't bent or something. same thing happened to my ktm.

@erkanmustafa4495 6 жыл бұрын

Hi! My variator plate does come off. How can i get it ?? Please help me. (The scooter is Piaggio Liberty 125 2006 year) :(

@rickrudge9349 6 жыл бұрын

I’ve heard that you need to buy sliders that are 2 grams lighter than the comparable roller weights. Is that true?

@tamaszsoller4749 5 жыл бұрын

this is an ASMR!!

@greatnugie7476 4 жыл бұрын

Nice video broo!,greetings from vespa lovers indonesia

@MitchsScooterStuff 4 жыл бұрын

Hey, thanks!

@baben5062 3 жыл бұрын

@@MitchsScooterStuff hey bro I have a piaggio fly 50cc I have big problem to start the engine when the motor is cold I really suffer I cleaned the carb changed the air filter change the plugs but still the same problem. I need almost 1 hour to start the engine.

@kalyangautam7345 4 жыл бұрын

Can we use this roller on aprilia sr 150?

@alberjamon1 4 жыл бұрын

Fantastic!!!!

@NoUroll 2 жыл бұрын

Where did u get the tool to hold the Variator in place while u tighten? As I don't have a impact and always have to take my scooter to a friends to change belts...that tool would help me out

@davidlewis7986 9 жыл бұрын

Mitch, just discovered your vids, jealous of where you live! My question for you, why do you prefer the sliders versus the rollers? Does it "feel" better, or is there some longevity or performance enhancing magical powers they possess? Just curious!

@mikeespinoza4067 Жыл бұрын

Has this question ever been answered?

@elromancero1158 4 жыл бұрын

Tengo problemas con mi moto honda beat scooter 100cc el variador esta devastado y no lo consigo por ningun lado ¿ por cual variador lo puedo reemplazar ?

@shwanabdulqader5096 6 жыл бұрын

Good job.........iraq

@sonlamthien1190 5 жыл бұрын

Clip chia sẻ mơ thu công rat hay.

@303Conceal 4 ай бұрын

How familiar are you with a 2012 piaggio Typhoon 50cc 4T? Looking to remove the restricter and which best rollers to give it better power off the line and especially going up hill....

@Pmz604 3 жыл бұрын

Thank you Mitch

@baben5062 3 жыл бұрын

hey bro I have a piaggio fly 50cc I have big problem to start the engine when the motor is cold I really suffer I cleaned the carb changed the air filter change the plugs but still the same problem. I need almost 1 hour to start the engine. Is the valve adjustment can be solution??

@tahir534 2 жыл бұрын

I have a question i have liberty125 year 2004, can i install starter kick in it?

@jmjahmed2202 2 жыл бұрын

Thank uuu for that.it'svery good to New it.

@audrey6277 2 жыл бұрын

Very informative…👍

@steely95 3 жыл бұрын

Many thanks dude

@CEINAR_ 9 жыл бұрын

Yeah and have you tried riding without the washers? To get more top end.Oh and what roller weights do u prefer? Thanks Mitch

@Raiffi323 Жыл бұрын

7 years later I’m about to do what you just said 💯thanks

@nixonn3 2 жыл бұрын

Much appreciated, thanks

@cryingfreeman1105 5 жыл бұрын

good job

@MitchsScooterStuff 5 жыл бұрын

Thank you!

@dangnguyen9376 6 жыл бұрын

hi , at 8:27 , how many mm socket exactly at the back clutch , is it 39mm ? , i hope the answer from you asap , thanks

@Cydro12 5 жыл бұрын

15mm

@AKKAD1 5 жыл бұрын

👍

@knirpatMechanical 4 жыл бұрын

Nice

@riadhsahlaoui7968 5 жыл бұрын

un vrai mecano

@tahir534 2 жыл бұрын

Thanks for the video. I have a question: i have liberty125 year 2004 it consume too much fuel. What have to do?

@virgilarce 2 жыл бұрын

Cleaning the air filter , when open this box see that had a lot oil filter , more the grease , with dirty filter you 'll need 4 turn in the sprea , clean all and put a little oil filter or changue the filter if its very dirty , and now only with 3 turns in the sprea ...ok ?

@virgilarce 2 жыл бұрын

Another , change your Spark , I buy Denso Iridium , for me the best , I have one 2004 Piaggio Skipper with 7,500 kms , and check the lines of gas in my case was broken , check your oil too ! Respect the viscosity always. in my case 5w-40 put Repsol Scooter Synthetic , and the air of tyres with one digital calibrator 29psi its ok. Good Luck Friend

@djalaltayara7986 4 жыл бұрын

هل يمكنني ان اعرف مانوع الدراجة بضبط لو سمحت صديقي كما اتمنى لك كل التوفيق ....وشكرا

@TamirciAbi 3 жыл бұрын

Güzel video kardeşim

@Frari747 2 жыл бұрын

Kind of meditation 🧘🏻‍♂️🔧🥰

@dmitryrozhdestvenskiy3987 6 жыл бұрын

I have Fly 125(same as 150 but from Europe) 2008. Do I need to strip plastic? Thanks.

@MitchsScooterStuff 6 жыл бұрын

Hi, yes you might if you can't take the CVT cover off with plastic cover on

@dmitryrozhdestvenskiy3987 6 жыл бұрын

Mitch's Scooter Stuff, thank you. Fantastic design :)

@AikenAiken417 3 жыл бұрын

What kind of tools i need?

@TheStefanM91 5 жыл бұрын

it goes faster with sliders than rollers?

@MitchsScooterStuff 5 жыл бұрын

depends on weigh of sliders.... sliders get better rpm at high speed... and a lot last longer than rollers.

@federicodevincenzi4284 4 жыл бұрын

Muy bien mitch

@MitchsScooterStuff 4 жыл бұрын

You're welcome Federico!

@donpablos1971 Жыл бұрын

Hola, Me podría decir si lo puedo montar en una Piaggio X8 200cc (2004, ZAPM36200) el cilindro de la X8 125cc? gracias!!

@berndb.b4509 2 жыл бұрын

Danke für die NM Werte .

@nickvas19 Жыл бұрын

how much nm for the 10bolts in 5:44?!

@HangKhach-ck7uj 5 жыл бұрын

clip kg có tiêng nói vẩn hiểu cảm ơn ban

@mohamadhalwan8005 4 жыл бұрын

👍👍👍👍

@pirexfranky3808 7 жыл бұрын

un grand MERCI.......

@elkhalouis 4 жыл бұрын

Bonjour mec Je voulait vous demander si possible de faire une vidéo sur le nettoyage du carburateur piaggio fly 50cc 4t Comment démonter es remontage du carburateur Merci d'avance

@mrmavridis6782 Жыл бұрын

Does fly100 has same engine mounts with fly125?

@MitchsScooterStuff Жыл бұрын

Yes should be

@bitalijsburijs5795 5 жыл бұрын

Gelera runner 50, 2005 , ремонт.

@MotherPuckerVids 9 жыл бұрын

mitch why did you put the restrictor washers back in ?

@MitchsScooterStuff 9 жыл бұрын

Hey, I read a lot of people saying leave the washer on... I don't want to risk anything... :-/

@MotherPuckerVids 9 жыл бұрын

Mitch's Scooter Stuff oh really? ive never heard people say leave it in, in that case im not too sure. I believed that the washers were just there to prevent the variator reaching "max power"

@danguy2009 8 жыл бұрын

+MotherPuckerVids They aren't restrictor washers, they are there to ensure correct spacing of the outer pulley. if you take them out then the variator nut will bottom out on the thread and the pulley wont be held tightly causing the pulley splines to strip, or even worse the crankshaft splines can get damaged. Variator restrictor washers slide over the silver cannon bush that mitch slides into the variator at 1.05

@michalisrx7 Жыл бұрын

thank you frend

@MitchsScooterStuff Жыл бұрын

no problem!

@Sidg2 4 жыл бұрын

In gearless scooters, Should we apply little bit of grease on rollers and roller-grooves in variator for smooth spinning of rollers in variator? Or will it make more issues after some time like dust deposit, vibrations etc ? Please tell what should we do with proper reason.

@MitchsScooterStuff 4 жыл бұрын

I wouldn't use grease but I used this amzn.to/2REKN99 for sliders so they won't be sticky or stuck

@CEINAR_ 9 жыл бұрын

I believe that belt is upside down. I think the smooth side rides the variator not the notced side. At least on the Honda Ruckus it did.

@kalyangautam7345 4 жыл бұрын

In my scooter there’s too much noise coming from clutch box I already changed belt, clutch shoe, clutch shoe bearing but still now coming what should I do?

@MitchsScooterStuff 4 жыл бұрын

what about rollers?

@Wael-Sawires 3 жыл бұрын

Hallo, also mein roller ist ein piaggio zip 2t und beim gas geben geht er einfach aus Kann mir jemand weiter helfen

@terry2xb 6 жыл бұрын

Why u do not remove the Rost a little bit when u have open the Cover?But good Job!

@blackheavyblans 8 жыл бұрын

how did you put the cvt cover so easily? i fight with this cover such a time and few minutes ago it goes on place. and then i start, so there hear something strange little9 noise. so then i was take a test drive, i hear huge strange noise in cvt and i dont know what is would it. my bike is piaggio fly 125. ps. im finnish and sorry about a grammar.

@Kendisesin 4 жыл бұрын

I have piaggio fly100 and My speedometer not working.How can i fix this ? @Mitch's Scooter Stuff

@duccati1000 4 жыл бұрын

Cable problem

@Kendisesin 4 жыл бұрын

@@duccati1000 Yes but I can't find repair video by step by step about it . 🤔

@MitchsScooterStuff 4 жыл бұрын

@@Kendisesin Remove the headlight cover and you will see the speedometer cable screwed on the bottom of dash... kzfaq.info/get/bejne/n96hf9xjq7O-nIE.html

@Kendisesin 4 жыл бұрын

@@MitchsScooterStuff Thanks but I asked 5 Month ago :( (For TUV inspection) My service found problem.its not cable problem They changed tires speedometer adapter and İt worked.Consequently ı pass inspection.

@shhadiamar6841 4 жыл бұрын

فل

@roymichaeldeanable 6 жыл бұрын

I would have greased the Case bolts...

@telosfd 8 жыл бұрын

What is that black box at 7:45 ?

@garrysutcliffe6254 7 жыл бұрын

Mitch my scooter keeps chewing my pulley wheel and front washer any help.great vidros

@mdzeeshankhan8103 4 жыл бұрын

Have kabeh ufPlmncsi

@bginting6624 4 жыл бұрын

@@mdzeeshankhan8103 m

@danielalves6015 29 күн бұрын

👏

@jamesconner3437 2 жыл бұрын

Had to take my clutch to a scooter shop and I gave the counter guy $20 just to spread the pulley and get the belt in...( I'm 74 with pretty bad arthritis....lol ) Just an idea, for any others having this problem. HINT: If you have someone do this for you, make sure that the belt is facing where the writing can be read, looking down at the clutch as it's spread. If there are also arrows, they face going left (counter-clockwise).

@ilufuadi4722 4 жыл бұрын

saya blajar

@motohuligani8680 4 жыл бұрын

1:37 Blokada

@mopedboys6669 4 жыл бұрын

U didn’t do Notting with the clutch or cvt

@eduvigesrodriguez5903 4 жыл бұрын

Sitemas electricos de moto yutin

@mercedes91407 9 жыл бұрын

hi i can add you on fb? pls i am italian i say to with you

@harviecz 4 жыл бұрын

1:50 why are there teeth on the pulley when there is no chain? :-)

@harviecz 4 жыл бұрын

OK, there is starter on the top which is only engaged during start.

@MitchsScooterStuff 4 жыл бұрын

yup! 🤙🏼

@nguyenminhhoang4336 4 жыл бұрын

repair instructions for boiling water

@joseguillen-ou3mz 4 жыл бұрын

Estación pero avla

@ashokarajapaksha1385 5 жыл бұрын

Asoka rajapaksh

@jmjahmed2202 2 жыл бұрын

Salam

@tufcluf 4 жыл бұрын

2000 eme like

@SanMaiero 7 жыл бұрын

Great Video But The Noise in the background omg horror !

@FishingwithCristina 4 жыл бұрын

I was about to point out the same thing it sounds like a rattlesnake

@xpen-mopxivi 4 жыл бұрын

Зачем поставил шайбу во внутрь рабочей поверхности вариатора, ремень же будет рваться и изнашиваться при контакте с этой шайбой!

@laurentluca2366 5 жыл бұрын

Bravo.ma qualcuno gli ha detto che deve o può respirare!? ;)

@irinapristupa445 4 жыл бұрын

И в чем тут смысл?

@strikermaximus365 4 жыл бұрын

No parts no bike you know.

@ShafiShafi-ug2ij 4 жыл бұрын

@philippemidoun5720 Жыл бұрын

Pas d essais 😮😮😮😮

@mcguevarra3326 5 жыл бұрын

scary rattlesnake....

@eduardosaravia1883 5 жыл бұрын

Bad jobs

@denwerfox2028 4 жыл бұрын

С помощью гавна и палок я собрала пылесос

@johanzh2550 4 жыл бұрын

why not talking?

@joykinder 4 жыл бұрын

He is voiceless

@MitchsScooterStuff 4 жыл бұрын

@@joykinder I use voice and I can talk but not perfect pronoun...I'm deaf :) almost full deaf haha