Vespa GTS CVT Removal / Installation (belt/variator/rollers/clutch)

Vespa GTS CVT Removal / Installation (belt/variator/rollers/clutch) | Mitch's Scooter Stuff

Рет қаралды 209,754

2 жыл бұрын

In this video I show you how to remove and install CVT cover, clutch, variator, drive belt and rollers on Vespa GTS / GTV / GT model scooter also Gilera Runner too!
More tutorial videos on this model - bit.ly/VespaGTSscooter
*** Tools I used in this video:
Torque wrench 0-150 lb/ft 3/8 drive - amzn.to/2Crqq4R
3” / 6” extension set 1/4 drive - amzn.to/2wDuzzW
Long Phillips screwdriver #2 - amzn.to/2fwGABn
Variator / Clutch holder tool - amzn.to/2ZuYJEA
10mm socket / wrench - amzn.to/2hqqYDW
19mm socket 3/8 drive - amzn.to/2CiXNqo
8mm socket 1/4 drive - amzn.to/2xMhsBl
Breaker bar 3/8 drive - amzn.to/3lrjIWj
Flathead screwdriver - amzn.to/2jN7lpE
Ratchet 3/8 drive - amzn.to/2hhmnUs
Ratchet 1/4 drive - amzn.to/2xcJEu1
Hi temp grease - amzn.to/2wXw8Zy
Magnet stick - amzn.to/2CkmFhx
Two bolts 3/8-24x2
Old toothbrush
Towel / rag
** Shop all the scooter tools and gear I use HERE **
bit.ly/MitchsScooterStuffSHOP
Shop Mitch's Scooter Stuff Logo Merchandise
HERE: bit.ly/MSSteespring
and HERE: bit.ly/MSSspreadshop
Want more free Scooter Tip / Tutorial videos - Help support this channel!
Paypal donation: bit.ly/PayPalMitchsScooterStuff
** Help translate my videos to your language HERE **
bit.ly/ADDYOURLANGUAGE
Follow Mitch's Scooter Stuff:
Website - bit.ly/Scooteronly
Instagram - bit.ly/2fB8gay
Facebook - bit.ly/2gEsYpt
My other KZfaq channel - bit.ly/2g4i5d5
Filmed by Mitch Bergsma
Edited on Final Cut Pro X on Mac
Scooter Intro edit by Erik Lauritzen
Check out his websites: bit.ly/2gQe8d4
Like the music? Check out this great library for KZfaq videos here:
bit.ly/MICTUNES (try it for FREE!)
#MitchsScooterStuffVespaGTS #MitchsScooterStuff #MicBergsma #vespascooter
******************************************************
IMPORTANT
Please only use and share this embed code of the original video.
Third party downloads and distribution is not permitted.
If you are interested in buying footage or for booking information please contact: hire.micbergsma@gmail.com
******************************************************
About Mitch's Scooter Stuff:
This channel is all about scooters! Tutorials, How to, DIY Maintenance, Reviews, Mods, Vlogs, Just for Fun, and more!
Vespa GTS CVT Removal / Installation (belt/variator/rollers) | Mitch's Scooter Stuff
• Vespa GTS CVT Removal ...
Mitch's Scooter Stuff
/ mitchsscooterstuff

Пікірлер: 160

@MitchsScooterStuff 2 жыл бұрын

*** Tools I used in this video: Ratchet 1/4 drive - amzn.to/2xcJEu1 Ratchet 3/8 drive - amzn.to/2hhmnUs 3” / 6” extension set 1/4 drive - amzn.to/2wDuzzW 8mm socket 1/4 drive - amzn.to/2xMhsBl 10mm socket / wrench - amzn.to/2hqqYDW 19mm socket 3/8 drive - amzn.to/2CiXNqo Long Phillips screwdriver #2 - amzn.to/2fwGABn Flathead screwdriver - amzn.to/2jN7lpE Magnet stick - amzn.to/2CkmFhx Variator / Clutch holder tool - amzn.to/2ZuYJEA Two bolts 3/8-24x2 Breaker bar 3/8 drive - amzn.to/3lrjIWj Torque wrench 0-150 lb/ft 3/8 drive - amzn.to/2Crqq4R Towel / rag Old toothbrush Hi temp grease - amzn.to/2wXw8Zy

@KatanaRIDERS. 2 жыл бұрын

Hey love you man ❤️❤️❤️🌹🌹🌹🌹

@Dniaprians Жыл бұрын

Roni

@Jepson07 Ай бұрын

💯❣👍

@teckshengtay166 Жыл бұрын

Really enjoy all your videos! No power tools, no loud music, clear, precise and those comforting pigeon call! I have been servicing my scooter for the last 8 years and are still learning something new! Thank you!

@MitchsScooterStuff Жыл бұрын

Thank you!! Thanks for stopping by! You're welcome!

@ranxer0n954 8 ай бұрын

The video has an almost meditative effect on me - no silly music, no superfluous information, just the facts presented in a perfect way. 10 out of 10 possible points! PS: Have I already praised the chilling atmosphere - I love the chirping birds in the background. 👍👍👍🦜

@giuseppecancemi8686 Жыл бұрын

Perhaps the best video tutorial, clear, slow... dummy proof..! Thank you!

@christoff8750 2 сағат бұрын

Great video...I followed it step by step and the procedure went flawlessly. Much appreciated!!

@Gapri3474 12 күн бұрын

Fantastic video. Super easy to follow. I especially love the Jurassic Park background sound effects!

@ddvan5947 6 ай бұрын

The knowledge shared regarding how to disassemble and assemble a Vespa CVT is very clear and detailed, friends

@josephmuglia4204 Жыл бұрын

The best, clearest video I’ve seen yet on this. Thank you so much!!

@tobyfoster1899 8 ай бұрын

super informative, and great production value on the video! Thanks for the obvious extensive effort to make this so easy to follow.

@user-yc4dk2tw3h Жыл бұрын

Очень хорошо видно, спасибо, ❤❤❤👍👍🛵🏋‍♂️ мне 75 лет катаюсь на Vespa-300, Москва...👍

@dankinsler1930 2 жыл бұрын

Thanks for the time and effort to make such a detailed video. I have a Buddy 125 and love your Buddy videos.

@MitchsScooterStuff Жыл бұрын

Happy to help!

@plankthomas5997 Жыл бұрын

Super Anleitung und für jeden leicht verständlich 👍👍

@1speedbrian 2 жыл бұрын

Thanks so much, I was just contemplating taking on this job, seeing it step by step is so much better than reading about it.

@MitchsScooterStuff 2 жыл бұрын

😄🙌🏼

@kevenchen8144 2 жыл бұрын

Wow,the Italian schtoor has much more complex design at cvt case than made in Taiwan! In Taiwan country side, every family has several schoors for family guys. It's so conveient and useful in our daily life. Thanks for your job and great work.

@MitchsScooterStuff Жыл бұрын

Interesting! Thank you! Ride safe!

@lanceferraro3781 Жыл бұрын

Thanks, Mitch. I hear light, metal scraping sounds from the clutch. Thanks for showing me what is in there. Time to put the Vespa on the lift.

@deepkendo 8 ай бұрын

The best maintenance video on a Vespa that I have seen! THANKS

@MitchsScooterStuff 8 ай бұрын

Wow, thanks!

@markoleary1601 Жыл бұрын

BEST ive seen so far dude....

@cesardea.castro2313 Жыл бұрын

Muito bom o vídeo, bem explicativo sem correria. Nem precisa de áudio para entender. Parabéns...

@jeffreyhurst9552 2 жыл бұрын

Excellent instructions. I think that even I could do this. Thank you Mitch. Wish you were here in Tampa, Florida.

@MitchsScooterStuff 2 жыл бұрын

😄🙌🏼 you’re welcome! Same here! Let’s see if lightning will win another cup!

@kylehandyman 2 жыл бұрын

Done about 20 just this year. Mitch rocks 👍👍👍

@MitchsScooterStuff Жыл бұрын

Awesome Kyle!!

@bungaloboynes 2 жыл бұрын

You maid me the mechanic I am today your videos are no 1 on KZfaq for scooter repair thanks again

@MitchsScooterStuff Жыл бұрын

Glad to help

@h.teomanince4310 3 ай бұрын

Mitch your tutorials are the best.Thank you so much mate😊

@MitchsScooterStuff 2 ай бұрын

Glad you like them!

@willvapes301 2 жыл бұрын

Hey mitch love the maintenance vids and it's been a while but much worth it I just made a payment on a used 2010 vespa 250ie I'm so excited ty for the tips and can't wait for me and blue to hit the road

@MitchsScooterStuff Жыл бұрын

Thank you Will! Awesome!! You will love it!

@bryanyoutubechannel 6 ай бұрын

The best hot to video ever, perfection. Thank you!!! I’ll do this job tomorrow.

@MitchsScooterStuff 6 ай бұрын

😄🙌🏼

@sandwaves5642 2 жыл бұрын

Your clip makes this job look like FUN ☝☝😃😃👍👍

@davidpost6902 2 жыл бұрын

That's Mitch, another well put together Video Most helpful !

@MitchsScooterStuff Жыл бұрын

Glad you enjoyed it

@mdmotorcycles10 2 жыл бұрын

Thanks for the video as i have to change the drive belt and rollers on my x8 125 keep up the good work 👍

@MitchsScooterStuff 2 жыл бұрын

👍🏼👍🏼

@sergio0159 2 жыл бұрын

Bravo, il linguaggio internazionale dei gesti è migliore di qualsiasi parlato......👍👍👍👍👍👍👍

@salva6318 5 ай бұрын

Dear Mitch you have very nice and so informative videos, thank you so much , these are really the very best Maintenance Videos , best wishes from Sardinia.

@MitchsScooterStuff 4 ай бұрын

You are very welcome😄🙌🏼

@wojciechs.4278 Ай бұрын

Very clear, perfect instruction.

@MitchsScooterStuff Ай бұрын

Thank you!

@patriot4359 7 ай бұрын

Speechless best tutorial ever for driving belt many thanks man 🔥🔥🔥how often do you replace the belt? Its about 15000km If im not wrong? Thanks again

@fabiopinzani3044 6 ай бұрын

Bellissimo video, bravo.

@onemanmob6756 Жыл бұрын

Quality tutorial! Will use it when working on my Aprilia!

@MitchsScooterStuff Жыл бұрын

😄👍🏼🙌🏼

@onemanmob6756 Жыл бұрын

@@MitchsScooterStuff what weight sliders by Dr Pulley do you use with the 300cc (OK - it is 278cc in reality)? There are four or five different weights ranging from 11 to 22grams available for this (and the 200cc) engine. Also: do the lighter weight sliders give better acceleration/higher rpm at a given speed while the heavier ones provide lower rpm at a given speed and thus better fuel economy? Do you know the weight of the original roller/slider?

@sbirulino3548 Жыл бұрын

complimenti e grazie per il video ! ✌🏻

@waynefoster2875 2 жыл бұрын

Great video keep them coming👍👍🇬🇧🇬🇧

@MitchsScooterStuff 2 жыл бұрын

Thanks, yup!

@DH-ns5lh 8 күн бұрын

Cheers mate - really easy to follow

@MitchsScooterStuff 5 күн бұрын

😄🤙🏼 Thank you, great to hear!

@arcadia5607 10 ай бұрын

Fricken awesome video bro.

@MitchsScooterStuff 2 ай бұрын

Thank you!

@mpampispinakis738 9 ай бұрын

Τά κάνεις όλα τόσο όμορφα , καί πολύ προσεκτικά 👍👍, σίγουρα στα συνεργεία δεν γίνονται ετσι, όσο μπορούμε μακριά από τά συνεργεία

@IceAge20017 11 ай бұрын

You saved me $100's. Thanks.

@youssefidbella5979 2 жыл бұрын

perfect and so clean job, thanks!

@MitchsScooterStuff Жыл бұрын

Our pleasure!

@andrewfitzman Жыл бұрын

Hi Mitch. Any recommendations on getting some more power/speed out of a pre leader 125 LX?

@the_fearless_explorer1213 Жыл бұрын

High great video do you think on a 125 vespa GTS super that it might seize the scooter the heat not sure how true this is. Your videos are bang on..

@lastairhead Жыл бұрын

Thank you sir. I want the 300gts Vespa. I owned only Japanese X-max so far, how reliable would you say vespa is? would you do a long trip with this one? My x-max is 50K and had no issues with it all those years.

@robf5550 11 ай бұрын

Great TUT!!!! thanks mate!

@MitchsScooterStuff 2 ай бұрын

Thanks!

@moss8448 2 жыл бұрын

Excellant as usual 👍

@MitchsScooterStuff 2 жыл бұрын

🤙🏼🤙🏼

@kevinchapman4408 4 ай бұрын

Superb tutorial thanks

@muhamadhamami3811 2 жыл бұрын

Saat penggantian roller sehrs nya pully primer & scunder nya bersihkan dan kasih Grease/gemuk pd sliding pully secunder (maks 3 bln).

@Mckscooter Жыл бұрын

is it recommended to apply degreaser and clean heavily soiled parts or best not to? i noted here you did a dry only cleaning perhaps on purpose? If cleaners can be used, what kinds? Awesome videos. Thank you.

@MitchsScooterStuff Жыл бұрын

Yes you can if it’s hard to clean off dust and dirt, just careful not spray in hole where grease are… I use gunk engine cleaner “foamy” Thank you!

@bizcom75 Жыл бұрын

Respect to you really you explain it very well thanks bro

@giuseppecancemi8686 Жыл бұрын

One question: I had the belt replaced at 20,000 km, now I have 29,000 and when I accelerate at the start it whistles, but it responds well to acceleration. Then warming up he doesn't do it anymore. Can it be solved with some spray or do I have to replace it already? thank you.

@francescoconti9100 Жыл бұрын

Bravo bravo bravo 👍 ciao dalla Sicilia 😁

@MrNessuno61 2 жыл бұрын

Excellent job👍

@MitchsScooterStuff 2 жыл бұрын

😄👍🏼

@vladanpesic5804 7 ай бұрын

Thank you. Excellent video..

@MitchsScooterStuff 7 ай бұрын

You are welcome!

@Monkeybongoes 2 жыл бұрын

Would graphite powder be a suitable substitute for the high temp grease?

@qualityreno9689 2 жыл бұрын

@ Mitch's Scooter Stuff: Hi Mitch. I'm an avid watcher of your videos. just a quick question, please. why are some CVT belts grooved from both sides, inner and outer? inner, its understood, to give more grip with the pulleys, just like in cars. but why does the outer side have to be grooved too? thanks in advance.

@bachnguyenvanbang8846 2 жыл бұрын

According to Honda, in esp+ generation, dual teeth vbelt will reduce vibration and enhance fuel consumption: Double cog belt The drive belt used for shifting gears is a double cog belt with cogs on both the outside and inside. Compared to the single cog structure, the double cog belt is softer in the direction of bending and has higher rigidity against pressure from the sides. This characteristic reduces the resistance generated while bending and suppresses friction. The deformation caused by the pressure applied from the pulleys to the sides of the belt is suppressed, resulting in highly efficient output transmission with less loss of driving force, and low fuel consumption

@qualityreno9689 2 жыл бұрын

@@bachnguyenvanbang8846 Much appreciated. You'd be surprised of how many motorcycle mechanics don't know that. Thank you sir.

@Cali3077 Жыл бұрын

Hi Mitch, once again i love your videos and i do the same job on my GTS 300 after i study your video :-) do you also have a video where you chnged the silent block!? Greeting from Germany

@liviudodo 3 ай бұрын

Hello from Romania . Quick question : i have a 2023 Vespa GTS 300 HPE Super Sport with 4000 km , and i recently upgraded it with a Polini Speed Bell Evolution , Polini Black Rollers 13 grams , but also changed the belt with a Piaggio original belt and also a new original Piaggio V-Belt Pulley . The clutch remained the original one , but at some low speed acceleration and then braking , or when i release the throttle at low speeds , i can hear a metallic rattling sound coming from the transmission , It sounds like some keys are dangling in your pocket over some coins , something like that , for a short period of time , maybe 1 second . Have you experienced this sound after changing things at transmission ? Many thanks

@dacallins0884 Жыл бұрын

Should you use high temperature grease on the spacer?

@MrHydromarine 7 ай бұрын

Danke! Greetings from Rosenheim Bavaria Germany

@MitchsScooterStuff 5 ай бұрын

Thank you for the big support! 🙌🏼❤️

@emiliobersani4521 Жыл бұрын

19/10 molto chiaro fatto bene

@abhimonnubiswas2334 Ай бұрын

while opening of scooter parts like shown on the video make sure to clean the parts with wd 40 and clean the clutch pad using 80 grit emery paper it will work better

@glennwood6141 2 жыл бұрын

Changed my rollers it’s still rattling so I’ve ordered the bearing , and new pulley someone said it should help now .

@IceAge20017 11 ай бұрын

Would it be a good idea to grease the spacer and rollers? Or would that make the belt slip?

@paulgoodwin9753 9 ай бұрын

No! No! No! (No grease on sintered bushes.)

@maxromero6066 Жыл бұрын

Excelente video

@MitchsScooterStuff Жыл бұрын

Thank you!

@Mrcustomwerkz 2 ай бұрын

dudeeee u are awesomeeeee

@MitchsScooterStuff Ай бұрын

You are!

@rob_scooter6199 Жыл бұрын

Top! This video shows that the variator must be tightened with the correct torque! If the torque of the vario is incorrect, there can be performance problems when cold/hot. With Minarelli engines, for example, this is about 30-40 NM. Threadlocker would be good too. 👍👍

@jacu255 Жыл бұрын

Exactly the same CVT as in Gilera Runner 125 ST, you can add in tags, thanks so much!

@MitchsScooterStuff Жыл бұрын

Thanks for the info!

@rafaelcolon6991 2 жыл бұрын

Good job.

@MitchsScooterStuff 2 жыл бұрын

Thank you 👍🏼

@petergatial4427 Жыл бұрын

Perfect 👍!

@nickvas19 10 ай бұрын

how much nm force we need for cvt cover 10 bolts?!

@kiriltsabalas9195 2 жыл бұрын

Best scouter

@MitchsScooterStuff 2 жыл бұрын

😄👍🏼👍🏼

@baskanahmet61 29 күн бұрын

Türkiye istanbul SEN ÇOK SAYGIDEĞER BİR İNSANSIN 💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙 istanbula gelirsen seni misafir etmekten gurur duyarım 🙏🙏🙏

@AeroFlip 5 ай бұрын

Do you k ow the cvt tightening torque spec for vespa GTS150??

@MitchsScooterStuff 4 ай бұрын

Oh no :( maybe same like lx 150, I have lx 150 video with torque setting on my channel

@nikoesko9225 2 жыл бұрын

No grease to the front?

@user-rm7fl2un7z Жыл бұрын

Bravo....

@abnerbjorn1106 2 жыл бұрын

Shouldn't you clean the CVT air intake filter when you do this?

@MitchsScooterStuff 2 жыл бұрын

Yes can do that, easy to service that part alone too

@geraldscott4302 Жыл бұрын

I don't recommend using 2 bolts to lock the clutch bell to remove the cover. I cracked a cover that way. You can get a very inexpensive tool for doing that, or if you have a picture of it, you can make one.

@nagypedro Жыл бұрын

I cracked it too

@noydooms1598 2 жыл бұрын

how many grams (dr.pulley) you recommend for gts300? thanks

@MitchsScooterStuff 2 жыл бұрын

11.5-12.5

@noydooms1598 2 жыл бұрын

thank you . . I'm a fan of yours and a subscriber. keep it up. still waiting for a great result from your VW.

@mohdhifzi7024 10 ай бұрын

@@MitchsScooterStuff how about gts250? How many gram u recommend brother?

@glennwood6141 Жыл бұрын

What is the outside casing called ? I wanna spray it black

@MitchsScooterStuff Жыл бұрын

I called it "CVT cover"

@allskoolguru 9 ай бұрын

best part of the video is he didnt even use any special vespa tools to remove the cvt

@MitchsScooterStuff 9 ай бұрын

❤️🙏🏼

@claudiotolardo3368 Жыл бұрын

lavoro ben fatto!

@MitchsScooterStuff Жыл бұрын

Thank you 🙏🏼

@Evgeny1012 2 жыл бұрын

Hello 👋 . How many miles run? to make a service

@JDMz 2 жыл бұрын

It tells you in your manual book what you should of got with the scooter.

@abnerbjorn1106 2 жыл бұрын

9,000 miles if you drive a lot of freeway, 12,000 miles if mostly city.

@Evgeny1012 2 жыл бұрын

@@abnerbjorn1106 thank you very much 👍

@thephotomatic Жыл бұрын

¡Gracias!

@MitchsScooterStuff Жыл бұрын

You're welcome!! Thank you for the support!

@thephotomatic Жыл бұрын

@@MitchsScooterStuff my pleasure, thanks YOU!!

@lassetapani69 5 ай бұрын

Loistava video 👍🏻👍🏻👍🏻

@DH-ns5lh 8 күн бұрын

Thanks

@MitchsScooterStuff 5 күн бұрын

Thank you for being a big support! 🙏🏼❤️

@RonConsumer 2 жыл бұрын

Hope that's not one of the wife's good towels... 🤣 Yes, I know I've seen that towel before, or maybe a similar one. Great job as always better than those who always jabbering about what goes on or off next and the reasons why... The beauty of silence.

@MitchsScooterStuff 2 жыл бұрын

Haha! That’s work towel 😆👍🏼

@srikichaa 3 ай бұрын

Can u ship these cvt rollers to india

@MitchsScooterStuff 3 ай бұрын

I don’t sell parts but you could try eBay or Amazon?

@madisonscott4677 Жыл бұрын

You can damage fan propellers

@user-ki6ub9tu9v 2 жыл бұрын

👍

@MitchsScooterStuff Жыл бұрын

🤙🏼🤙🏼

@konnakonstoulia7352 Жыл бұрын

its the same setup to a gillera runner st 200

@MitchsScooterStuff Жыл бұрын

Awesome, good to know, thanks! I want a runner so bad! 😄

@Patrick82. 2 жыл бұрын

Top

@MitchsScooterStuff 2 жыл бұрын

Thanks

@paololaurozeta2339 4 ай бұрын

Not good but very good....👋👌✌👍👏💪(from Italy)

@MitchsScooterStuff 4 ай бұрын

Thank you!

@NshsShdh-jx9ob 10 ай бұрын

🥰🥰👍👍👍👍👍

@asedalkhalas3221 2 жыл бұрын

great excellent

@MitchsScooterStuff 2 жыл бұрын

👍🏼

@kevinchamberlain7928 2 жыл бұрын

Good vid but airline and 6 tins of brake cleaner would have been nice!

@viarnay Жыл бұрын

The only flaw CVT has is the bad braking power because of the rollers and you lose engine braking too.

@onemanmob6756 Жыл бұрын

It is not bad with this engine at least - I use almost no brakes in situations where cars in front of me use them a lot - I just roll off the gas to achieve the same braking, but yes on super-steep hills engines braking on my scooter is not enough and I have to use brakes on top of it...