Excellent, clear and to the point. It gave me the confidence to do it myself, and it worked like a charm.

Great video, it only took me minutes to take the old one out after watching your video. I really appreciate the time you took to make such a detailed video. I'm already subscribed to your channel, but I gave your video a "Like".

You saved me. Chicago winters are ruff. My car was turning on whenever it wanted to all summer and i had seen this video so when i went to the junkyard for something else I grabbed me one. The car had stopped acting up until now so i just had the switch in my trunk but today it finally gave all the way out. I was mad at myself for being lazy but i said "ok" now i have no choice but to switch and hope that was the problem and now? So far, it starts like a dream!👍

Thank you for this video! I was able to see what the ingition switch was attached to and was able to order the right part. Bless you!

Common problem for lancers. FYI to others it might be worth the 40 dollars to try this, than to assume your perfectly running car doesn't have an issue with this part. Common symptom is having to rip the ignition to start your car. That's how I diagnosed it. Mine has to be in the exact right position

Excellent video. Very well explained step by step. Thank you.

Very well done tutorial. Made it look easy. And i hope it saves me the trouble of needing a starter.

TY Kong, worked great on my 07 Mitsubishi 380 made the job easier. Much appreciated

Done fixing my lancer. Thank you,sir...

Great video, thanks! I find all of your videos very useful for my 03 O-Z, but this one especially. Car starts like a charm every time now.

Awesome and very descriptive video much appreciated thank you!!

Great video thank you so much I just did some work on my lancer and let me tell you that your video came very very handy thanks so much keep up the good work 👍🏼

Thank You much for this Video!!! I now replaced my ignition switch for my M. Lancer 2004... Post more videos for your car man!! Thanks!!

Very clear tutorial on replacing the ignition switch, you have given me confidence to do it myself, thanks champ.

So helpful!! Thank you very much!

Thanks for the video worked like a charm and my OZ Rally

Worked like a charm!!!

Thanks bro. Just did this on my 03 evo lol

I just followed step by step and it’s working as new. Lancer Es 05

Great video! Thank you.

thank you! VARY CALM and easy going tutorial!!!

Great video! Thanks.

Excelente tutorial

Is a very good video thanks a lot

Great DIY video

Good job....nice video.

Very usefull.. Thabk u so much

Thanks for this

Tyvm

Ty so much' awesome video. I'm gonna order a new ignition switch and try this fix on my 02 es because it only starts when I try multiple times. and I've replaced a ton of other crap and now it's time to get it right. Same on my 93 impreza. Just wont crank.. ' thanks again

What brand was the old switch and was it interchangeable with a different brand? My car is currently in need of this and the last time I bought a part it wouldn't fit

Hey bub I have the aame car just 2006. I was wondering do you know where the starter relay is for this car? Ive channged the starter, battery, and ignition switch as shown in this video. Any help would be appreciated!

Thanks

Thanks, good video!

thanks

On my 03 OZ when I turn key off and remove the car engine and all electrical stay on. Would this be the cause?

What is the wire on the ignition switch called ?

Forgot to say this but thank you!

Well done, excellent even has the tools used. I am going to use this for my 2006 Outlander thanks :)

Hi, do you have the OE Part Number for the switch? I also need to change mine. Thanks and very helpful video :)

Did you have to get a new key?

Thank you for this clear and helpful video! My 2004 Lancer had been getting harder and harder to start - whenever I turned the key to start nothing would happen though the dash lights and radio came on. I'd have to turn the steering wheel and try again. This week it finally would not start at all for me. Today, I replaced the switch per your instructions and it seems to have fixed the problem - however, now the key does turn smoothly in the lock. I noticed when I took my switch off, it had a graphite lube inside the hole that faces the key. I did not put any in the new switch, and I am wondering if that could be why it doesn't want to turn as smooth?

Hi! I bought a secondhand car from the dealership and he told me that he kind of replaced the ignition of the car that’s why he change the key of it I think the key is a bit older than the car, now I have this problem every time I turn the car on it won’t start until I jiggle ( shake )the key in order for it to start, and not just that when I turn off the car it will stock before the lock or final turn of the key in order for me to take out the key so what I always do is jiggle it again and push the key until I manage to fully turn the key into the lock mode, which will allow me to take the key out from the ignition, do you have an idea what’s the best thing to do for this? I’m your new subscriber here thanks

Also, may I kindly ask on the back side wheels area of my vehicle (Mitsubishi Lancer ES 2002) is Getting Bold From the inside both sides of the Tires.? Which Part do I Replace to Purchase.? Muchly Appreciated for A Prosperous Response... thank you

Good evening Mr. Chang. I'm thinking I'm having some problems with my ignition system. What it does: I put the key into ignition and turn to Acc, all dials and sounds come alive. I turn to ON and I hear nothing. I have to take my key out of the system and keep attempting to start the vehicle for it to work. When it does start, it runs smoothly Sometimes I have to turn it all the way to ON really fast to get it to start. What would the cause be? Cheers!

At 3:24 you remove that white connection, what is that connection for? It's missing from my car that I'm currently trying to get going

what's the part number

Muy bueno el video pero lo podrían traducirlo en español?

Sir mine is mitsubishi lancer 1997, when i start it,sometimes its just one click start and sometimes theres no response but the only the "tak" sound (sounds like lowbattery but i have new battery)and you have to turn many times the key before it start,what is the possible problem?

Will you need new keyes/coded? For the remote to work etc.

What does the two green wires do for the ignition

Is there any way to repair the switch instead of replace it?

Do you need a new key 🔑 with the switch?