Getting Started with Mastercam Mill

Getting Started with Mastercam Mill | Skills Event Webinar

Рет қаралды 71,946

Күн бұрын

To learn about more advanced Mastercam training opportunities, visit mlc-cad.com/mastercam-training/
Mastercam is a fully-featured CAD/CAM solution, and getting started is easy. See our expert Patrik Warren go from a concept napkin sketch to a 3D model and on to a complete NC program for a specific machine in this introductory skills event webinar recording.

Пікірлер: 23

@Repomam2000 3 жыл бұрын

Excellent tutorial. Look forward to more.

@shinkansen4521 2 жыл бұрын

thank you for this excellent tutorial. it was my first time using MasterCam. i was able to follow along and create the same, and figured out how to fix that bad tool path before i saw it in your video (i had assumed i did something wrong, but apparently not :)

@MLCCADSystems 2 жыл бұрын

Great to hear!

@2k9flash 2 жыл бұрын

fantastic tutorial, I learn a lot from it

@MLCCADSystems 2 жыл бұрын

Glad it was helpful!

@umeshkale858 4 жыл бұрын

Brilliant tutorial..

@MLCCADSystems 4 жыл бұрын

Glad you enjoyed it! We've got more Mastercam videos coming on this week, subscribe to see more like this!

@dewanwasif1833 3 жыл бұрын

what is this part called and what is it used for? thank you ! Great tutorial

@MLCCADSystems 3 жыл бұрын

I believe the part was created specifically for this event, we don't have any additional information on its name or origin unfortunately.

@amarnathvm227 3 жыл бұрын

👍

@garrettmack3188 2 жыл бұрын

When i get to the point where i want to cut body for the slots, i do everything you do in the video, then when i the green check mark, a bubble pops up saying thicken operation failed

@MLCCADSystems 2 жыл бұрын

This is very likely related to the file you created or some operation on that file, reaching out to your value-added reseller would allow you get help quickly. If you are an MLC CAD Systems customer you can submit a request on this website or give us a call/email. www.mlc-cad.com/technical-support/

@patrikwarren4355 7 ай бұрын

Hi Garrett. Check to make sure that 'Thin-wall' is not the default selection when you are doing your extrusion. Sometimes it can be activated and cause a problem when extruding. It is found on the second tab in the extrusion window dialogue box.

@jasonshane4606 3 жыл бұрын

Why changing tool position numbers? Thank you

@patrikwarren4355 3 жыл бұрын

Hi Jason. I changed the tool position numbers to match the positions I was using on the machine. You want to set them to the tool numbers that you using so that the machine selects the correct tool to cut the area you have defined.

@erferrera8505 2 жыл бұрын

for find "certification courses of mastercam" where i can looking for ? thanks

@MLCCADSystems 2 жыл бұрын

university.mastercam.com/ contains the courses, prep material, and the exams themselves. Scroll down until you see the courses labeled Certification.

@jimjimfrancis22 7 ай бұрын

Had a couple questions, how did you select everything at 14:21... and if i click on the wrong line how do i unselect with out exiting the entire fucntion?

@patrikwarren4355 7 ай бұрын

Hi Jim. I used the Ctrl+A to select everything. You can also use a window selection to grab it, but I find that Ctrl+A works better for me because it ensures that I get everything. you can simply click on the unwanted entities to de-select them from the selection. I hope this helps!

@MLCCADSystems 7 ай бұрын

Thanks for the clarification Patrik!

@arkarmyint4958 2 жыл бұрын

Sir, can you give me a part file for mill and turn 2, 3, 4, 5, axis

@MLCCADSystems 2 жыл бұрын

There are a lot of example files on the Mastercam website that you can browse and download for review. See if one of the Signature Parts will work for you on Mastercam's website kzfaq.info/get/bejne/hranl8mou5nYias.html