Great video- thanks a lot. I was actually wishing I could get those wheels for my X595. Nice review. I'm not buying a new one until new models are released... not sure when that will be.

Gd day I will be getting this tractor in a month torn between the 48 accel deep dish vs the 54 HC deck.I mow less then a half acre.I I know total overkill.Thanjs for your input!!

I'm still use my 08 x720 with 3800 hrs, hauling stuff around and putting around the yard everyday, but her grass cutting days are over since the pto clutch went out In her last summer and that's just gonna be why to expensive to fix. I ended up getting my first zero turn instead.

Their is an air ride seat available for this tractor. Made a huge difference for me. The seat is from deere and their is some auxiliary power from the seat air pump to hook up but it absolutely worth it.

Nice mower and good review. I certainly agreed with your reasons for buying the new mower over a used unit, so much so that I also purchased a new mower and took delivery about one year ago. In my case, I replaced an X300 with an X354 and I very much enjoy the 4-wheel steering for my residential sized needs. I have the same styled seat as your X758 but without the armrests. I like it.

Where do you post what you have for sale? I enjoy your videos. I am somewhat a collector of the 200 and 300 series and still use them all. I am looking for a front blade for a 318. Thanks, Dave

I found your channel several months ago and appreciate your commentary full of logical and well explained commentary. It looks as if I am going to order a new X754 for my property next spring and add an aftermarket shovel (maybe a little bull). There are basically none of these JD models (X754 and X758) here in Canada that are used, and the very few that I have seen have close to 1000 hours on them and listed basically at almost full MSRP (!)...so new seems to be the only way to go for me. Just curious, do you think that JD will add an electric version in the future?

Your x758 is one very nice machine I was going to buy an x750 but I decided against it and went with a Kubota bx1880 because it was 11,280.00 for the tractor and with a loader deck and weight box it was 18,985.00 and to get an x750 with a front blade wheel weights a cat 1 3 point and a rear pto I would have been 24 thousand dollars for a garden tractor

Thanks. I have a 2016....179hrs. 4 foot deck.

Have you noticed a louder noise than normal if you engage the mower deck it the highest raised position, once I lower mine to the cut height I like it's fine but mine doesn't like to be all the way up with the pto engaged. Just curious if your machine was the same way

Often people don't link the seat and are worried about the aluminum rims. If the rims are not eaten by salt and are torqued to the right speck they should last for a long long time.

Will that seat fit on a X580? Thanks.

Did you have any trouble w the spring jumping off that holds the deck belt tight. I did just under 4 hours

What transmission is used on the 758 the data suggests a k90?? I can’t find any information on these units. Thanks

Thanks for the review. I just got one a few weeks ago. Does your deck vibrate when the gauge wheels hit the ground? I've noticed when they bottom out I feel quite a bit of deck vibration. Occurs in a hole or when mowing a steep side slope. This does not occur when the deck is off, only when pto is engaged.

I can't get mine to mow level without allowing the anti-scalp wheels to ride along the ground and act as height control wheels. Dealer has tried to figure it out but no answers.

I have a question when you take the deck off or on can you drive over it

Well good for you

Can you do a comparison mowing video of the 455 x748 and x758

How easy is the auto connect to install?

Does it ever bog down in tall grass? Lack of power?

And more then likely it will not come back down on price, Should this mess change for the good!

How many hours would you guess you can get over the life of this unit?

How is it different from the x748

Nice mower but can’t be purchased in Australia 🇦🇺 .

Nice video! I have about 80hours on my X738 and I have to agree with your comments. I would like to add the CUP HOLDER!!! lol it needs to be larger.

Nice machine. To each their own but your land looks like prime zero turn mower territory. Then again I don’t like mowing and want it done as fast as possible. Anyway, cheers.

Not designed for a 3 pt??? Your missing out..... I pull a 4 ft land plane with mine.

its a strong mower but thats it. big difference between it and a compact tractor that 3 point lift and mid and rear pto. and icompact tractor is strong enough to have a front loader and bucket and even a mini backhoe attachment. this thing is not strong enough for loader or backhoe its just a mower. I used one this morning the exact same x758 and couldn't figure out how to lower the deck. I'm used to a grasshopper zero turn. but this is a good strong mower that can run a long time on little fuel. I mowed about 5 acres. grasshopper 227 is much faster with 72" deck and much more maneuverable. what I didn't like about the 758 is when backing up even a little bit the mower deck clutch shuts off so you cannot mow at all in reverse . this about drove me crazy.

What transmission is used on the 758 the data suggests a k90?? I can’t find any information on these units. Thanks