Balancer Shaft Belt Delete 4d56

Рет қаралды 54,787

2 жыл бұрын

the Only reason i considered removing the belt is because i cannot find a replacement silent shaft
Gas diesel engine comparison
• Gas vs Diesel Which is...
Engine wash • Engine Wash
How to identify Engine noise
• How to Identify Engine...

Пікірлер: 100

@estrasilla 10 ай бұрын

Excellent video! Thank you. I was having a hard time with Timing Belt A, and watching your video I learned some good tricks on how to hold the belt to make it easier, and also on how to use a pry bar to move the tensioner against the spring pressure.

@mr.e.r.2913 7 ай бұрын

The video is straight forward. I have learned everythinv about replacement of the timing and balancer belt. I love the three scenarios that causes eng8ne vibration. Thank you!

@verdw6587 2 жыл бұрын

Thanks for sharing 👍Great content for us L200 owners. Just stripped down my L200 and found the balancer belt missing 😕Now you've explained balancer, not so worried I found it missing 😉

@marvinmacaisip6983 2 жыл бұрын

What i like most in all your videos sir is that every single second of it is very helpful. Mabuhay po kayo sa inyong pag share ng knowledge.

@MrDIYer 2 жыл бұрын

Maraming salamat po

@DreamingAboutDreams 2 жыл бұрын

Such a good video mate, clear and full of good information. Confidence inspiring

@lawrencedrakes2324 2 жыл бұрын

Thanks for this video was Really worried about mechanic removing balance shaft belt on my 4d56engine

@morrungulobay7785 2 жыл бұрын

Thank you for your content. Highly informative and educational.

@creation.innovation 2 жыл бұрын

Thank you very much for another eye opener and enlightenment

@romellawagan568 2 жыл бұрын

Thanks for sharing knowledge. I learn a lot from your videos

@morandydacruz5995 2 жыл бұрын

I do like the vidoe and very much appreciate for your time the share the knowledge about mechanical of the car engine. Love and peace Timor Leste

@jamesronaldbunag3037 Жыл бұрын

Thanks for sharing sir...very clear explanation from theory to actual....

@bwalyasapwe3397 2 жыл бұрын

I've learnt something about engine overheating. My a engine brought the oil warning light when the electric fan stopped working and I was wondering why and how they were connected now from your explanation I've got it . oil becomes thinner when its heated that's why I had the oil light show up.good video thanks

@jadonjoseph3597 6 ай бұрын

Very useful thanks much I was able to change my balance shaft belt because of your video

@kieranloftus6807 2 жыл бұрын

Great video sir, very well explained, thank you 💪

@pasulongnidondon 2 жыл бұрын

Na open ko na mag isa ang timing belt ko kanina pero di ko matanggal ang balancer kasi wala akong y tool...salamat sir sa video...

@stephenmutanuka3372 Жыл бұрын

You are good and now I understand thank you am watching from Zambia capital city Lusaka thank you

@cbenally82 2 жыл бұрын

Very informative video. Thanks!

@corinphillips4445 2 жыл бұрын

Helpful and informative thanks ☺️

@francissibeso3048 2 ай бұрын

Well articulated thank you

@malcomsmiff5035 3 ай бұрын

fantastic video, best on this subject.

@Dop_Mohammad Жыл бұрын

Thank you for the amazing information and video it really helped me 👍🏽👍🏽👍🏽👍🏽

@andrescampa4258 2 жыл бұрын

I love your videos sir. I feel confident to change my timing belt. Haha

@eliparkinson2834 2 жыл бұрын

I love your video u have helped me alot thank you alot

@peter7998 Жыл бұрын

I deleted the ballancers, too. My only worry was that I hoped the lower one doesn't power an old pump as well, or if the oil pressure isn't going to be lost due to balancing shafts being just filled with oil not rotating... Can someone share some light on it pls?

@harwoods11 2 жыл бұрын

Good clear video 👍

@ryannabo4407 2 жыл бұрын

thank for the information ,, my Pajero also was a problem due to the balancer shaft bore, was already damaged maybe i will condemn the balancer shaft

@stevemcilroy9518 2 жыл бұрын

Perfect, thanks.

@tonyuy1170 2 жыл бұрын

Very informative. I have the same problem with my starex and my mechanic does not know what is causing it.

@morrungulobay7785 2 жыл бұрын

What actually happens to the belt tension during the final stage of the cambelt installation. (i.e.Just prior to locking down the tensioner bolts) By turning the crankshaft clockwise and applying opposite pressure (anti clockwise) to the camshaft sprocket how does the belt tension increase by applying this action. Also is it nescessary to loosen the balance shaft tensioner if only the timing belt (Belt A) is being replaced.

@ronnberalde2300 2 жыл бұрын

ang galing mo po mag explain.. hehehe!

@user-hh1fe1sp7f 2 жыл бұрын

Комментарий в поддержку канала) тоже юзаю 4d56)

@kajju1976 Жыл бұрын

thanks for sharing

@technicmarkus Жыл бұрын

great broo

@kennthtinni3431 2 жыл бұрын

Very informative and also your presentation is second to none 👍. I have a question which I need your help...my 4d56 k34 crankshaft pulley isn't spinning causing a sparkyng sound. What could be the problem 🤷‍♀️🤦‍♀️🤷‍♀️🤷‍♀️

@josetsantos3329 2 жыл бұрын

Saludos desde guatemala maestro

@MrDIYer 2 жыл бұрын

Gracias amigo.

@giftkhomo8247 Жыл бұрын

nice video

@martinxxxmartin Жыл бұрын

Amazing video. It will save fuel to run with those shafts deleted. Not sure if it is a noticeable difference.

@healthymixzemason1397 2 жыл бұрын

Hopefully thank u boss

@Damians-di8lt Жыл бұрын

If the belt was to break on balancer is there anyway it can be 180 out when refitting new belt??

@Footrotflats251 2 ай бұрын

Hey man been watching your videos the last 2 days, going to have a go at advancing my pump timing today, it’s really down on power, lots of blue smoke at idle and hard to start 😅

@MrDIYer 21 күн бұрын

Thank you..you can do it.

@Footrotflats251 20 күн бұрын

@@MrDIYer I adjusted it as far towards the motor as I could, it made a difference, more power and less idle smoke but it’s still not perfect so I’ve bought a new timing belt and going to check the timing when I’ve replaced the belt

@focuscgln4574 2 жыл бұрын

wow! i hope i have the guts to do it with my 4D56 ^_^ more subscirbers to come!

@leonnatala4776 2 жыл бұрын

Hi DIYer, am sorry this question is not related to the topic at hand but mine is on the cylinder head for 4D56T, in reference to the comment you made last time when I had blowby just after rebuilding my engine you advised that if the head is warped that I replace it. Why Can't one skim the head and still use it? Mine was skimmed twice before and it's got a very little warp which I think caused a coolant leak when I used 3notch metal head gasket.

@MrDIYer 2 жыл бұрын

Manual doesnt advice to reface the cylinder head for 4d56 But it can be done at least twice. Maybe even trice. Depending upon the machinist. Make sure the block is flat too. The block as well as th head mas both be perfectly flat

@leonnatala4776 2 жыл бұрын

@@MrDIYer Ok thank you very much. May be I will just get a new one. Is the cylinder heads coming from China good quality, I a shop selling brand new ones but imported from China. Or it's better to go for good second hand which is on standard?

@MrDIYer 2 жыл бұрын

i would personally choose brand new

@rockraholy2298 4 ай бұрын

Sir thanks for this. it is a big help. Btw, what are tools needed to do all this steps?

@user-je3jq4eb6l 10 ай бұрын

Hi my 4d56 adventure have a broken balancer bolt, how can we change or replace it?

@zeledon89 2 жыл бұрын

Very good video thank you so much well explain.

@gracesoncuyasen2304 Жыл бұрын

How did solve the worn-out silent shaft sir? In the video you "deleted" it, but after a year, were you able to solve it? Thank you!

@johnbishop4753 Жыл бұрын

My name is John bishop and I am from Barbados. Can you give some tips on the mk3 mitsubishi l200 k74 crank angle sensor?

@kingmejia3317 2 жыл бұрын

Sir may nabibili po ata na oil pump cover na surplus, kasama na po yung silent shaft :) sana po makatulong :)

@healthymixzemason1397 2 жыл бұрын

Good video as always teach sad u had to delete your balance shafts

@johnbishop4753 Жыл бұрын

I am impress

@Sixfiveagluseg 2 жыл бұрын

Thanks for your videos sir. I learned a alot. i have the same engine l200 strada and the problem is the crankshaft keyways are worned out..is there a better way to fix it.? Tried a machine shop once and it fails.

@MrDIYer 2 жыл бұрын

Make sure theres no play. And when you install the crankshaft pulley there should be no play too. Thats what the thick washer is for.

@GaneshmanLamathinker 2 жыл бұрын

Can you please advice me how to fix the worn oversized balancer bush on block or its ok without balancer too ? From Nepal.

@MrDIYer 2 жыл бұрын

I would say its better to perfom an overall engine rebuild.

@soulotravelor8080 2 жыл бұрын

Hey Mr. DIYer. You rock btw. Looking to pickup a imported Pajero in the US with it being my first diesel. I worked on G54b Astron motors a good bit with my Starion and I know about the balancing shafts and the design of these blocks. I was wondering, is it ok to leave it in like you did? On the Starions, you remove them entirely. I haven't see just the belt/sprocket get removed by itself before like that. Thanks!

@MrDIYer 2 жыл бұрын

its been running without the belt since that video upload, just the belt removed but if you ask me i would so much prefer to have the balancers working.

@GaneshmanLamathinker 2 жыл бұрын

Sir how about mobil circulation if balancer is not rotating ? Does it make problem to mobil pressure to tappet and other parts or have to block the passage in balancer please advice .

@MrDIYer 2 жыл бұрын

Oil pressure would pretty much stay the same

@funnygodlehah2266 2 жыл бұрын

Hello sir Diyer I hope u can help me fix the rattling sound of my L200 whenever I step hard on the accelerator, thank I’m advance 😊

@user-ii8pl8su7j 2 жыл бұрын

Another great video. Thank you so much. And about kia bongo diesel engine. If i use it on my jeep wrangler. Did this will make slow. Or it is the same things like 4d56.

@MrDIYer 2 жыл бұрын

More or less the same with 4d56

@user-ii8pl8su7j 2 жыл бұрын

@@MrDIYer wach one is more fast 4d56 or kia bongo diesel engine

@INVENTEDNERDXX Жыл бұрын

Sir how to remove or loosen the crank shaft bolt ng 4d56 engine? Ikambyo lang din ba sa 5th gear? Need ko kase palitan water pump.

@BobseanPyokol Ай бұрын

Can you show me how to put silent shft

@BobseanPyokol Ай бұрын

Silind sifting how to put

@henriquemoura1344 21 күн бұрын

Você tem o manual

@kisakyetommy 2 жыл бұрын

Thanks brother for sharing knowledge 🙏. I have a mitsubish L200 but keeps breaking the timing belt. Broken 2 belts in 6 months. What could be the problem???? Thanks in advance ☺

@MrDIYer 2 жыл бұрын

I would check the camshaft and cambearing caps. I would check for the torque applied on the bearing caps too. Because if its too tight that would cause the cam difficult to rotate breaking the belt.

@kisakyetommy 2 жыл бұрын

Thanks again brother. Will check them.

@MrDIYer 2 жыл бұрын

Ok brothet. Give me an update. Thank you too

@verdw6587 2 жыл бұрын

Hi Tommy. If your belt failed, didn't it wreck your engine??

@harwoods11 2 жыл бұрын

@@verdw6587 4d56 is non contact engine

@glendysmahabir7288 Жыл бұрын

How to set a inject pump in a 4d56

@dirtdiver634 2 жыл бұрын

gud pm po sir, kung nag balancer belt delet po b, hindi po ba maccra agad yung makina sir,.

@MrDIYer 2 жыл бұрын

Hindi nmn po..pero kung wala namng dahilan e delete wag e delete.

@Centrix1000 2 жыл бұрын

Hello sir, thank you for explaining this video in such a clear way. I would like to share with you a problem that i have lately on my Mitsubishi Pajero 2.5 TurboDiesel (1988). There is coming a big whinning noise from transmission i think. Whatever gear I go in, it whines like crazy expect for the 4th gear. Do you have any idea what may cause the problem. Thank you in advance, im looking forward to get an answer from you!

@MrDIYer 2 жыл бұрын

Just perform the process of elimination. Once you are sure the sound is being cause by the transmission, the only way to know whats causing the transmiision noise is to bring it down. It could be cause by the lining, synchronizers bearing etc.

@clyoest 2 жыл бұрын

It could also be the through out bearing if it a stand shift trans!

@eddymo4564 2 жыл бұрын

Or maybe the gear oil level is down

@Centrix1000 2 жыл бұрын

@@eddymo4564 hi, thank you for your response. Ive checked the oil level and its as it should be. I dont have enough time to dissmantle the transmission and look inside!

@sacredsword7373 10 ай бұрын

Bisay-on nlang nato dong

@MrDIYer 10 ай бұрын

Ani nalang bay, pag buhat kag video nimu dayun mag bisaya ka. Kay wala man naku gi buhat ng video para sa imuha lang kasabot ka dong? Ang youtube dili man para sa pinoy or sa bisaya lang ug labi na dili para sa imuha lang. Simple ra na dong, kung wala ka ganahan sa imung gilantaw o gi paminaw pwede man ka mangita ug lain ug dili na mamastos pa, kay wala ku nimu gibayaran ug labi na wala pud tika gi bastos sa akung video diba?. Pero kay buguk man ka, wala ka kabalu ana. Diba? kay obs obs man ka lol

@randypangan3055 2 жыл бұрын

Good evening sir...when deleting the balancer does it affect the power of the engine? sabi ng iba humihina daw ang power ng makina if putol ang balancer belt..thanx

@MrDIYer 2 жыл бұрын

kzfaq.info/get/bejne/gd51fMyaqqzYcas.html

@eduardodeleon4161 2 жыл бұрын

Sir saan ang, location ng drain ng cooling system nang, Mitsubishi adventure Yung plug sa, engine block

@MrDIYer 2 жыл бұрын

Sa ilalim ng exhaust manifold, malapit na sa transmission may plug don

@eduardodeleon4161 2 жыл бұрын

@@MrDIYer OK thank you sir....

@Sk857. 2 жыл бұрын

your idle is to high sir.

@MrDIYer 2 жыл бұрын

Result of removing the balancer belt

@Sk857. 2 жыл бұрын

Hello Sir, next month lm thinking to change the timing belt and the water pump , but lm not sure what lm gonna do with balancer belt , should l remove or put it new belt, what is your suggestion? hope u are doin good