Modern Waterfall Table DIY For Beginners

Рет қаралды 49,279

4 жыл бұрын

My name is Tyler and this is my first waterfall table. Its a black walnut slab that was about 6 feet long and about 36 inches wide at the crotch. First off I flattened it using my router with a small bit (one day I'll be able to afford a larger router). Then I filled all the cracks with TotalBoat epoxy. After that I made the final pass with my router, trimmed the edges, and then literally cut it in half. That was so scary!!! Then I just used my new biscuit joiner to put it back together. Then I made the opposite leg out of steel tube that I cut and welded together at my father-in-law's shop. I love this table and I can't wait to make more! Thanks for watching!!! :)
My Instagram: / tcwoodshop91
My Patreon: / tcwoodshop
Music:
Tropical Traveller by Del. / del-sound
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/2Putju2
Music promoted by Audio Library • Tropical Traveller - D...
Song: Jarico - Island (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Video
Cold Funk - Funkorama by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
Music promoted by Audio Library • Cold Funk - Kevin MacL...

Пікірлер: 49

@windwalkeraerials4932 3 жыл бұрын

12 min long video with no BS fluff and trying to make yourself look cool. Thanks for this, more YTers need to be like this.....

@codewithkam 4 жыл бұрын

The only DIY project I've seen on KZfaq so far.

@andrewrease7227 4 жыл бұрын

It's always dope to see DIY videos without tons of expensive equipment. Great work! I will be doing one similar soon so this was a huge help!

@tcwoodshop4438 4 жыл бұрын

Thank you! Glad you enjoyed!

@kestutisk9397 3 жыл бұрын

Great job 🎊👍Looks amazing!! 👌

@dariancornish9787 3 жыл бұрын

Great work, thanks for sharing.

@DanHovarter 4 жыл бұрын

I just removed a Redwood for a friend and got to keep the trunk. I’m making a waterfall table after watching this. Need to get me that oval hole saw thingamajiggy you got there. 🤙

@tcwoodshop4438 4 жыл бұрын

Its called a biscuit joiner. I think I paid 160 or something for it at home depot

@mattweaver5196 Жыл бұрын

Awesome job!!! Looks great. Thx for sharing.

@billballeza377 2 жыл бұрын

Very nice, man! One day you’ll be helping your son-in-law on a build. It’s good to have family with skills!

@TreyJones 4 жыл бұрын

Amazing!!!!!!

@tcwoodshop4438 4 жыл бұрын

Thanks bud! Glad you enjoyed!

@kylapowell9750 Жыл бұрын

Beautiful!

@hammerdick82 4 жыл бұрын

Nice work man. About to go practice this on a mesquite serving tray.

@opes134 4 ай бұрын

impressive work man

@richgarland6170 Жыл бұрын

Absolutely ripper finish bud , looks amazing! You did a awesome job . Table top grain Looks really really nice 👍

@garysmith9282 4 жыл бұрын

you sound like a pro already. good job.

@tcwoodshop4438 4 жыл бұрын

Ha! Thanks Gary!

@Joestacemazjojo 4 жыл бұрын

Beautiful job man. Thanks for the instructional video

@tcwoodshop4438 4 жыл бұрын

Hey thank you! It was a lot of fun!

@jamartin1 4 жыл бұрын

Beautiful!💜

@tcwoodshop4438 4 жыл бұрын

Thank you!

@TheRealTurboJesus 2 жыл бұрын

It’s funny cause the metal is second nature to me as a welder but I’m a little intimidated about making these miter cuts without a track saw! Thanks for the video, helpful and entertaining

@joshdiatte50 4 жыл бұрын

Good solid info.

@tommyzegers 7 ай бұрын

Great work!

@mikebaker1044 4 жыл бұрын

Nice job

@chewinggumstudio785 4 жыл бұрын

Awesome!👌

@tcwoodshop4438 4 жыл бұрын

Thank you!

@sierraaleneful 3 жыл бұрын

Beautiful

@tcwoodshop4438 3 жыл бұрын

Thank you!

@thehandynomadthehandynomad843 4 жыл бұрын

Great job bro!

@tcwoodshop4438 4 жыл бұрын

Thank you. I love this table.

@williamguzman6037 Жыл бұрын

Great job thsnks

@mikebaker1044 4 жыл бұрын

Nice

@dushyantpuri Ай бұрын

9:02 jhing jho...chukukukuku....jhing jhon

@cchristensen4 2 ай бұрын

How has the wood movement been? Also is the joint pretty strong?

@MrThenry1988 2 жыл бұрын

Good work man. Again, good work. Did you sell it? Was also wondering what something like that might cost me if so. I've seen things like that for sale. Outrageous to not so bad. I do a little wood working with slabs I've made. Haven't went fully to this level.

@RainDog222222 4 жыл бұрын

that miter joint was woeful

@tcwoodshop4438 4 жыл бұрын

Looked good to me

@kalibbybee4764 3 жыл бұрын

It didn't seem super tight but there wasn't a great shot of it either. Getting that seamless joint is tough with those tools. Exactly why I'm on here looking at videos, looking for tips on the perfect joint without using professional tools

@brewtalityk 4 ай бұрын

yo what's with that line on the miter joint... you're not done yet

@imlivingyourlife7354 4 жыл бұрын

Are you using plain packing tape to prevent epoxy leaking out?

@tcwoodshop4438 4 жыл бұрын

Yep

@bh6984 4 жыл бұрын

I see that you superglued (?) clamping cauls to blue painters tape. How is it that the painters tape withstands the pressure of the clamps and doesn't peel off? I was planning to use a brittle hide glue to adhere clamping cauls to my mitre joint but this method seems to involve SO MUCH less cleanup after the joint has set up. Rather than chiseling off the hide glue you merely pull up the painters tape.

@tcwoodshop4438 4 жыл бұрын

They just barely managed to hold on. In hind sight i would have put the painters tape parallel with the grain. It would have held on a lot better that way. I was more concerned with closing gap than I was clamping down with tons of pressure. The clean up was non existent

@tcwoodshop4438 4 жыл бұрын

If i were you I would use about 6 to 8 inch pieces of tape and lay the first piece on the edge about an inch from the joint and then lay all the subsequent pieces overlapping all the way across the joint. The surface area of the tape with allow for just enough grip to allow you to clamp it into place. Just dont over do it.

@Randy-zq2zo 9 ай бұрын

Except you didn’t record the part in wanted to see 😢

@kevinamymurphy7126 5 ай бұрын

To be honest, that was a really good video BUT at 10:35, I got really nervous that the steel leg would fall and damage itself, or the wood top. Easy to make to error - ask me how I know..... (it has nothing to do with the workmanship - that was beautiful. I'm just trying to prevent the point of a rant / tool throwing etc.)