Modifying My Equipment Trailer Ramps From Slide In To Hinged

No video

Modifying My Equipment Trailer Ramps From Slide In To Hinged

Рет қаралды 25,714

Күн бұрын

“I get a commission every time you purchase a product through my Amazon affiliate links below.”
Amazon link for Weld On clevis shackle mount set- amzn.to/3ScamhO
More clevis shackle mounts - amzn.to/3VFTkdo
In this episode of Projects with Paul, I am modifying my trailer ramps from slide in to hinged. Please like, share, comment & subscribe. Thanks for watching.

Пікірлер: 41

@enginebae3471 3 жыл бұрын

Great idea about the pins in the bar stock. I want to do the same to mine and I was going to weld them in solid. I like the thought of making them removable for different situations 👍

@wanderingtravels8812 2 жыл бұрын

Thanks for sharing Paul. Getting ready to do same project to my 20ft trailer with 2x5 ramps and going to copy your pattern. Thanks! Kentucky

@HamiltonvilleFarm 3 жыл бұрын

Nice work 👍

@johnbrandonjr Жыл бұрын

Thanks for offering a solution to my problem with your trailer ramp hinge design.

@ProjectsWithPaul Жыл бұрын

Awesome, I'm glad it helps. Thanks for watching.

@jdub229r 2 жыл бұрын

I’ve got the exact same setup as you had, what a P.I.T.A. sliding the ramps out. Thanks for the info!

@ProjectsWithPaul 2 жыл бұрын

It made a big difference. Thanks for watching.

@garymccarver5006 2 жыл бұрын

Good job. Just suggestion, instead of just chain to hold the ramps upright, use turn buckles with the chain. Pulls the ramps up tight to your stop brackets. No banging and rattling on the road.

@RockhillfarmYT 3 жыл бұрын

Awesome

@beardedprepper8606 2 жыл бұрын

Great job!

@richcreager7877 2 жыл бұрын

I. Process of doing this myself, thanks for video

@georgenettlesjr1466 Жыл бұрын

I like thay setup!

@ProjectsWithPaul Жыл бұрын

Awesome, Thanks for watching

@signmasters99 Жыл бұрын

Have you thought of cutting the edge of the clevis you welded to the trailer at an angle in order to bring your hinge point up slightly higher than the trailer deck - by doing this, the ramps can hinge down flat onto the bed of the trailer. Just an idea...

@ProjectsWithPaul Жыл бұрын

I have not, but that is a good idea. Thanks for watching!

@traceysmith2749 3 жыл бұрын

👏🏻👏🏻👏🏻👏🏻

@rayv8355 4 ай бұрын

What did you weld with I have a 170 Chicago mig welder I’m wondering if it could handle those 1 “ pad eyes

@ProjectsWithPaul 4 ай бұрын

I use a miller 211 on 230 volt

@rayv8355 4 ай бұрын

Last question where did you get your small 1”pieces from?

@ProjectsWithPaul 4 ай бұрын

@rayv8355 amazon. There's a link in the description

@rayv8355 4 ай бұрын

Sorry I’m meaning the 1” pipe pup pieces that the 1” solid pipe runs through.

@ProjectsWithPaul 4 ай бұрын

Home depot

@davidvonbergen1316 2 жыл бұрын

The hole in clevis mounts are .95 inch. The steel rod I got is 1.0 inch. Still trying to work it out.

@ProjectsWithPaul 2 жыл бұрын

There are 1" drill bits on amazon for around $17 with a 1/2" shank. Maybe that would help. Thanks for watching.

@davidvonbergen1316 2 жыл бұрын

I used a Dremel tool to hone out the hole. Slides in nice now.

@davidvonbergen1316 Жыл бұрын

Dremel tool to hone out the hole.

@rayv8355 4 ай бұрын

How much did you cut off?

@ProjectsWithPaul 4 ай бұрын

1 1/2" from the clevis. Thanks for watching.

@eddieromero740 2 жыл бұрын

Hello Paul, can you share the part numbers of the clevis's that you purchased from amazon? Thanks in advance

@ProjectsWithPaul 2 жыл бұрын

B074Q1TV3S is the part number on amazon. Thanks for watching.

@mackaatya7959 2 жыл бұрын

What are those pieces called that you are willing to the back of the trailer to hinge off

@ProjectsWithPaul 2 жыл бұрын

Weld on clevis or shackle mounts. Thanks for watching.

@jessemarin5044 2 жыл бұрын

Isn't that 1 inch over rated for the 1/4 angle iron your welding too. Seems that the angle iron won't hold to the amount of weight your putting on it. Great design tho,doing a great job.

@ProjectsWithPaul 2 жыл бұрын

The angle holds just fine. I used the 1" because it adds more surface area for the pin to ride on and I think it looks good. Thanks for watching.

@jessemarin5044 2 жыл бұрын

@@ProjectsWithPaul it does look good,I like it and I might copy cat you on a future build.