Monster LED Light Strip Remote Not Working?

Рет қаралды 30,089

Күн бұрын

In this video I show troubleshooting steps on why the remote may not be working on your Monster LED Light Strip. The remote may not be working because of the battery, the IR Receiver location, the USB port the lights are plugged into, or because of interference with the IR Receiver being too close to the TV IR receiver. If these troubleshooting steps don’t help you will want to contact the Monster company to see what they advise for the next step. Thanks for watching!
AFFILIATE DISCLAIMER PLEASE READ:
The links below are affiliate links. This means I will earn a small commission, at no additional cost to you, if you choose to click the link and make a qualifying purchase. As an Amazon Associate I earn from qualifying purchases.
Amazon:
CR2025 Batteries On Amazon (Verify Correct Battery For Your Remote) - amzn.to/3L4fzoA
Basic Safety Equipment - Safety Glasses On Amazon - amzn.to/3IDvbfU
Basic Safety Equipment - Nitrile Gloves On Amazon - amzn.to/3J6BUAx
Basic Safety Equipment - N95 Masks On Amazon - amzn.to/41BrTCy
Basic Safety Equipment - Earplugs On Amazon - amzn.to/3kFfj4u
Intro/Outro Music: RKVC - Tropical Thunder
DISCLAIMER PLEASE READ:
For reasons beyond the control of Todd’s Garage there is no guarantee of the information in this video and/or description. Use of the information in this video and/or description is at your own risk. Todd’s Garage recommends the use of proper safety equipment and taking all safety precautions when working with the tools, items, or other things seen or talked about in this video and/or description. The information in this video and/or description does not guarantee a certain result or warranty of any kind, expressed or implied. Under no circumstances shall Todd’s Garage have any liability or responsibility for any injury, damage, or loss of any kind that may result from the use of the tools, items, information, or other things seen or talked about in this video and/or description. Any Injury, damage, or loss of any kind that may result from the use of the tools, items, information, or other things seen or talked about in this video and/or description is the sole responsibility and liability of the user.

Пікірлер: 26

@MSEAY725 Күн бұрын

Thank you so much! A quick KZfaq search brought me to your channel. I replaced the battery in the remote and wondered why the remote still wasn’t working. The IR Receiver was blocked.

@Mousa_Attrah 6 ай бұрын

Thank you so much. My led’s were not working for a long time, but as soon as you mentioned an ir receiver, I just moved the cable. It worked great after that

@spaceyy66 Жыл бұрын

I pressed reset on accident and the remote works for my other strip but not for the one it came with

@Ejejesksjs 8 ай бұрын

Thank you, it worked!

@robloxweplay Жыл бұрын

Thank you bro

@joyfultillman7194 7 ай бұрын

Thank you sm it works now

@lovemesomrodwave14 Жыл бұрын

Bro thank you sm

@TropicsYoutubeSide Жыл бұрын

I plugged in the light strip, I replaced the battery and the remote, the light is not blinking, it won't change color whenever I press a button

@user-wx6fs7ls5b Жыл бұрын

Thanks. Mine has the wrong battery already in it. A 1220 probably put there by a customer who returned it. Cool product otherwise.

@Audioarchivist 6 ай бұрын

I'll say these low end led strips have some buggy programming, in my experience of having one. I had a strange experience when I bought one - first one I got home had a loose wire to that IR receiver chip board, and would work intermittently as wires were moved. Brought that right back to the store and exchanged for a second one, and it came with a broken remote control. Like, literally a piece snapped off of it like it was stepped on! Brought that one back and got my third one. Okay... It can get "stuck" in certain modes, like certain colours. Purple sometimes locks it up to need a hard power down to work again. I like the slow colour fade mode, and it can take a dozen presses of the reset button for it to respond to the remote again to change colour or mode or power down. Changing colour between pure red, green, and blue are flawless (far left side buttons) but as you get to blending and mixing them to create the other colours, it likes to seize and need to be reset. Finicky. Cheap! They do make a "smart" led strip this size, and it is far more customizable and programmable. I don't have one of the fancy ones... But this one feels like a secondary rebranded knock off piece of junk!

@jaredp1516 Жыл бұрын

How do u make the LED save the color settings, everytime i turn my tv off it resets

@lgh88 Жыл бұрын

My battery is stuck in without the black piece how can I get it out ?

@lgh88 Жыл бұрын

Does anyone know because I can't change the color without this remote and without the black piece it will not work if u read this.. please reply and help me

@lgh88 Жыл бұрын

Please!

@Johnfrm402 Жыл бұрын

Try tweezers

@fabiopineda4688 Жыл бұрын

@@lgh88Magnet

@lgh88 Жыл бұрын

@@fabiopineda4688 putting a magnet to anything electric can seriously mess it up. . But thanks for your idea, the tweezers worked.. thank you again for the idea... just don't EVER put a magnet to anything electric.. it can ruin it forever.. -