Monster NOS Race Engine in a Bush Plane - Part 2

Monster NOS Race Engine in a Bush Plane - Part 2 | Scrappy #40

Рет қаралды 186,528

3 жыл бұрын

Mike installs a 250 shot of nitrous oxide on his experimental bush plane named Scrappy.
Scrappy & Mike Patey Merchandise
www.mikepatey.com
Check out some of my Favorite Aviation Companies:
Best Tugs
www.besttugs.com/
Worlds Greatest Zip Tie!
www.griplockties.com/mikepatey
Avionics Systems
www.avionikits.com
Pratt & Whitney
www.pwc.ca/en
Turbine Service
www.covingtonaircraft.com/
BRS Parachute
brsaerospace.com/
Aircraft Engines
www.lycoming.com/
Carbon Cub Kits
cubcrafters.com/
Aircraft Lighting
aeroleds.com/
Garmin Aviation Products
garmin.com/Aviation
Aircraft Fabric
www.stewartsystems.aero/
Aircraft Lighting
flywat.com/
Alaska Bushwheels
www.airframesalaska.com/
King Shocks
www.kingshocks.com/
EarthX Batteries
earthxbatteries.com/

Пікірлер: 930

@billjamison2877 3 жыл бұрын

Mike, I'm an Old Fart who flew back in the 70's and 80's. Every time I watch one of your videos, you inspire me and pump me up to get off my butt and have some fun. I have a friend with a Cessna R182 Skylane. I called him up, said lets fly, so we did! Thanks for inspiring me to get back into something I love to do. God bless and stay safe.

@sonshinelight 3 жыл бұрын

You go, Bill. I'm 63 and my Lady is 57 and we're going to build a Bearhawk and get our fly papers.

@sonshinelight 3 жыл бұрын

@Pit Viper i love the 4 place, but since amphib floats will probably be involved, we will be building the Bearhawk 5.

@gryfandjane 3 жыл бұрын

The more I see of this engine build, the more I think Scrappy won’t need wings after all. Wow, what a beast...

@francisschweitzer8431 3 жыл бұрын

Stole my thunder...lol I was thinking that same exact thing and almost posted it the same way.

@tysonsymanowski395 3 жыл бұрын

Just be a rocket go straight up hanging on that prop

@perhearkko4255 3 жыл бұрын

I think we will be surprised by the wings... there is a reason we have not seen them. Delta wings for supersonic? The gear winglets will be enough? Tube wing?

@turborider5050 3 жыл бұрын

Legit scared about other component ripping off under the trust, torque and vibrations this is gonna produce

@Levi_Allen 3 жыл бұрын

Mike: “I will hardly ever use this” Narrator: “that in fact was not a true statement”

@imacrazyguy5831 3 жыл бұрын

Fact Check states this as FALSE Lol

@MikePatey 3 жыл бұрын

😂🤠😂.

@whitenoisechannel3724 3 жыл бұрын

@@MikePatey ✈️🤠🤠✈️

@gregking7926 3 жыл бұрын

That sure sounded like a vailed "here hold my beer" statement!!

@ashleymarks6144 3 жыл бұрын

That time when one favorite creator comments on another favorite creator’s video🤪🤩

@tyga3966 3 жыл бұрын

"couldn't find these online so we quickly made them", god Mike you're living how most of us only wish

@mcbrite 3 жыл бұрын

He does so by design... Not chance...

@pseudocoder78 3 жыл бұрын

There's a lot of DIY types out there but very few have the equipment and ability to make parts better than factory made like Mike does.

@chrisbowpiloto 3 жыл бұрын

@@pseudocoder78 I had a similar thought. I am nowhere near his level, but I certainly have done this type of thing already

@kene6838 3 жыл бұрын

A thumbs up to Ron, we should all have such a good friend. And I’m sure it goes both ways.

@g2me194 3 жыл бұрын

I second that. Can you imagine if we all had someone in our lives that shared their passion and skills like Mike or if we shared what already have. Way to go Mike’.

@scott.wallace8625 3 жыл бұрын

Im sure fingers go back and forth...

@Rocscrawler 3 жыл бұрын

I just watched a 23 minute video that was easier to watch than some people's 3 minute videos. Your energy level is off the charts. You knowledge and excitement for what you do is second to none. I am not even an aviator and I LOVE watching your videos. Keep up the good work. NOW, GET BACK TO WORK!!!

@rob7993 3 жыл бұрын

Every time I click intending on skipping through the key parts of the video, and every single time I watch the whole thing in disbelief at your skills and enthusiasm. Very talented man and one of my favourite channels. Cheers Mike!

@gcm747 3 жыл бұрын

Mike, your ‘tired’ is me running at 150%! Honestly, your drive and motivation is incredible. I could watch what you do for hours - although I’d be exhausted in doing so!

@brandtmeyer 3 жыл бұрын

Mike, you are truly incredible. You are the unEngineer. Your ability to take technical, high level info, break it down and teach for a layman all the while making it as suspenseful as a Quentin Tarantino movie. Carl Sagan was able to break down the cosmos for us. Your doing the same with aeronautical engineering and manufacturing. BRAVO!!!!! And Ron!!!, thank you for your continued efforts and abilities. I know these videos would not make it as frequent nor as thorough without your help. Every mad scientist needs an additional mind to keep them grounded and focused on the task at hand. You guys are great!

@uowebfoot 3 жыл бұрын

That is an insane amount of thought, time, effort, and weight for something you will probably never use. I love it!

@gordonquickstad 3 жыл бұрын

Phew, I'm glad you came up with a way to help overcome the horsepower deficiency in that 13 liter engine.

@dotjoubert8803 3 жыл бұрын

Didn't the original Cub have a two-cylinder engine with what displacement?

@paulharrison614 3 жыл бұрын

Mike laughing while standing in 200 shot of laughing gas- perfect

@HalfricanFPV 3 жыл бұрын

Mike: " I didn't like anything that was already in existence so I built my own"

@bengman95 3 жыл бұрын

Literally every part of his airplane! haha

@derekricker7930 3 жыл бұрын

Can’t wait to see this thing rip. Plus has an amazing pilot behind the stick

@traviskleckner 3 жыл бұрын

@@bengman95 every part of the plane built from “scrap”. I love this guy.

@yankey4 3 жыл бұрын

Love it brother. Thanks for letting us be a small part of the family. God bless

@kschleic9053 3 жыл бұрын

Thumbs up to the editor! The combined discussion overlaid with time lapse was a great way to convey the work while fitting more content into one video!

@jeffpierce3436 3 жыл бұрын

Mike, You are either the most patient man alive or for you, as much as you love to fly, your ❤️and soul is in the build!! (Back to work 👍)😁

@Hinch55 3 жыл бұрын

The discussion on timing and nitrous made me say "OOOoooh" out loud. I learned something!

@JDon280Z 3 жыл бұрын

Another Great video and lesson. I didn't realize that there was so much involved in creating a correct nitrous system. I would have never thought about the ring gap being part of the equation. Again, great video and I can't wait for the next one. Get some sleep while I get back to work.

@ericelsberry5585 3 жыл бұрын

The way to simple solutions is complex understanding. You understand things at a level most could only dream of!

@W4UWC 3 жыл бұрын

I am in awe of the cleanliness and organization of your shop. Actually I see that with most high-end aviation shops I see on KZfaq. The expense in the tools and benches and all the supporting equipment is amazing! Thanks for sharing your work and especially the passion for doing what you do. Few people on earth have that passion!

@4ohf 3 жыл бұрын

this did not feel like a 22 min video... I want more lol

@kavemonkeyz 3 жыл бұрын

I agree with what’s been said! 😁

@tmcwilliam01 3 жыл бұрын

Always

@MJFloof 3 жыл бұрын

I would pay good money to clean up tools for this guy, just to learn.

@Russellsperry 3 жыл бұрын

These videos seem to fly by faster than anyone else’s.

@that_puffsley_guy 3 жыл бұрын

Instructions unclear, piston 4 currently headed to mars

@zombieplant3048 3 жыл бұрын

She packed my bags last night pre-flight Zero hour 9:00 a.m. And I'm gonna be high As a kite by then I miss the Earth so much I miss my wife It's lonely out in space On such a timeless flight And I think it's gonna be a long, long time 'Til touchdown brings me 'round again to find I'm not the man they think I am at home Oh, no, no, no I'm a rocket man Rocket man, burning out his fuse up here alone And I think it's gonna be a long, long time 'Til touchdown brings me 'round again to find I'm not the man they think I am at home Oh, no, no, no I'm a rocket man Rocket man, burning out his fuse up here alone Mars ain't the kind of place to raise your kids In fact it's cold as hell And there's no one there to raise them If you did And all this science I don't understand…

@zombieplant3048 3 жыл бұрын

the problem is that his plane is a boxer soo its in orbit (no mars) :(

@soupfork2105 3 жыл бұрын

Elon Musk likes this

@w0monty494 3 жыл бұрын

Pov: You’re perseverance Percy : 👁👄👁 🔩⛓⚙️

@billyhall3309 3 жыл бұрын

At least NASA can pick it up for you.

@andrew.mccarter 3 жыл бұрын

Im not an engineer but i could watch mike all day long what a smart and interesting guy and because of him im doing my pilots licence thanks mike

@thatairplaneguy 3 жыл бұрын

I’m getting impatient I want to see those wings!

@Heyemeyohsts 3 жыл бұрын

He forgot

@elosogonzalez8739 3 жыл бұрын

May not need them by the time he gets the cowling buttoned up!

@johnp9581 3 жыл бұрын

What wings???

@alanmcgeachy66 3 жыл бұрын

Wings? We don't need no stinking wings

@dwightpries8330 3 жыл бұрын

Turns out Scrappy is a gyrocopter.

@losthorizonfishing107 3 жыл бұрын

So cool watching Scrappy come together step by step!

@rickbullock4331 3 жыл бұрын

I can’t wait to see Scrappy flying. The amount of handcrafted technology on this aircraft is phenomenal.👍👍

@jdgdesign 3 жыл бұрын

Love the side by side view of the carbon fiber work and install work.

@heartofdawn2341 3 жыл бұрын

Mike Patey is to bush planes what Peter Beck is to rockets and Christian von Koenigsegg is to cars- an innovator constantly pushing at the possibilities as to what's truly possible (without making everything explode.) What a time to be alive.

@gemsquashthg 3 жыл бұрын

I’ll never get tired of your work and drive. Epic every time. Thank you Mike 🙏🏼👊🏼

@jmwarden1 3 жыл бұрын

I agree 100%

@BB_Chaptsick 3 жыл бұрын

Not an original thought, but you’re definitely the Tony Stark of aviation. Humbling to watch. Thanks for bringing us lay persons along for the ride.🤙

@valuedhumanoid6574 3 жыл бұрын

Yeah, if he came up with the Arc Reactor I would not be surprised in the least. That contraption he came up with for the NOS/fuel injection is in line with that

@ExtremeSquared 3 жыл бұрын

That's Burt Rutan, but Patey is getting up there. Imagine a collaboration.

@BB_Chaptsick 3 жыл бұрын

@@ExtremeSquared Ummmm, okay. I’ll capitulate on that one. sir. But it certainly is hard for put Mr. Patey on the same field.

@bakerrv 3 жыл бұрын

I agree, I need more of Mike, Ron & Scrappy! Can't wait to see Scrappy flying!

@wayphun72 3 жыл бұрын

Awesome! You have to be so excited to get this cowling designed and done, I sure am!

@cchambard 3 жыл бұрын

I never want the video to end! Always a fun way to experience the build.... Thanks, Mike!

@confusedgingers 3 жыл бұрын

OMG your OCD is massive! I love it

@miketalon2197 3 жыл бұрын

I could watch Mike all day long. His enthusiasm is contagious!

@RandysFiftySevenChevy 3 жыл бұрын

At the end of your videos when your explaining what transpired in the video I cant help but think how I saw every inch of this plane being built. So when I walk up to Scrappy at an air Show and push the button I know you know that I'm one of your students. Makes me proud.

@JlerchTampa 3 жыл бұрын

Griplock zip ties, the thing you don't think you need until you try them then you wonder how you ever got by without them. Used these on my boat last year and I'll never use cheap zip ties again, after a year of direct sunlight and exposure all the Griplock ties are pristine.

@timcross2510 3 жыл бұрын

WINGS ,MIKE! WINGS!

@OneCupOfCoffee204 3 жыл бұрын

Just a bunch of old scrappy parts I had laying around the shop LoL I can't wait to see how this machine performs. Seriously great work Mike. You make it look easy.

@NicHolmes 3 жыл бұрын

Years ago we were trying to figure out how nitrous worked, so the cheapest motor to potentially wreck was the ride on mower.... it was INSANE for 13.5 seconds... Now about 14 years later I understand why cranks came out the block and the neighbors were returning sparkplug bits! Bring us more, I learn something new every video!!

@rogerarseneau9728 3 жыл бұрын

I am not an Aviator however I saw a post that said: "I never want this video to End!" I am in total Agreement! Those minutes seem like such a short time! Favourite Channel on KZfaq for Sure!

@jmwarden1 3 жыл бұрын

So am I

@r.p.3192 3 жыл бұрын

Jeez, the whole thing looks like a bio-reactor... so many pipes and hoses one might think you‘re gonna make some illegal booze coming out of Scrappy..LOVE IT !!!!! Go Baby Go!

@1STGeneral 3 жыл бұрын

It's not finished and Mike's acting like he had his head in the nitrous stream instead of his hands 💨🦲🙄🤗Do it again Ron🥶Ok we're good let's get some hot chocolate extra hot

@rickswanberg4995 3 жыл бұрын

"I'm going to make a very simple voltage step down variable timing........." Who is he kidding, NOTHING Mike Patey makes is simple! Elegant, creative, awesome but never simple.

@desertfox3860 3 жыл бұрын

I think it's a flux capacitor!

@dankoneon 3 жыл бұрын

Every time you move to a different section I think this is my favorite part and then it’s the next one then the next. This has been my favorite build series of all time.

@s3gv 3 жыл бұрын

This is awesome! Loved the furious references LOL I remember watching a guy blow a piston through the hood of his car at the track one day with my dad and we all were shocked, the rest of the pit was shocked. The guy had no idea what he was doing, just goes to show how unsafe it can be. Awesome to see the progress! I want to see how you do the voltage step-down//code!

@joeychaseable 3 жыл бұрын

I can't wait for the first balls to the wall flight test!

@alpha6ix222 3 жыл бұрын

Stan Chase do you know where the saying “balls to the wall” came from?

@liftman3334 3 жыл бұрын

Hopefully he will be flying this at wing and wheels in September😬😬😬🤞🏻🤞🏻🤞🏻

@Caseywhitee14 3 жыл бұрын

@@liftman3334 I think his plans are oskosh.

@billallen4793 3 жыл бұрын

@@alpha6ix222 I do....lol

@liftman3334 3 жыл бұрын

@@Caseywhitee14 cool! Hopefully I can see it sooner I live 30-40 min from his hanger😬

@v1rotait23 3 жыл бұрын

Always entertaining, always learn something, always enthusiastic. Ron and Mike having a ball of a time building a Monster Cub! Back to work!

@steveone9375 3 жыл бұрын

Its great to watch a professional engineer at work with innovated ideas

@Russellsperry 3 жыл бұрын

I’m sure the cowl is going to be amazing, but I’m really excited about the wings!

@GunnarLof 3 жыл бұрын

Wings? Where this Scrappy is going, it won't need wings... 🤣

@phoenixrising4573 3 жыл бұрын

Don't need wings in orbit, it has plenty of thrust for propulsive landing

@Convair_F-106 3 жыл бұрын

you've seen them. look to the gear legs, that's all it needs. it's gonna be the Starfighter of bushplanes

@kylebarton3532 3 жыл бұрын

Mike thanks for making these videos! It’s like watching a favorite movie you know it will end but you never want it to. Back to work! 🤠

@FeralPreacher 3 жыл бұрын

I have seen so many young people think they just bolt on the kit and instant power. With a small shot they can get away with it, but that is never enough and rings bind, head blow, and they are out of luck. Nice explanation of ring gap and its importance. Good luck with your timing adventure, it is one of the more important items with nitrous injection. Thanks for sharing.

@bktrub 3 жыл бұрын

Love seeing someone go all out conceiving and building something with little to no limitations.

@RobertForslund 3 жыл бұрын

Man... Scrappy is one EPIC machine! Can't wait to see you get it into the air! 😀 Keep up the awesome work! Back to work! 😛👍

@Mark_Ocain 3 жыл бұрын

Those welds look solid, man. Good job!

@geoffadam4475 3 жыл бұрын

The coolest plane ever ! So happy I’m along for the ride. Thanks Mike for sharing your projects with us !

@artd. 3 жыл бұрын

Unbelievable, the thought process to make something perfect! Mr. Mike, you have an such an amazing brain, talent and craftsmanship to accomplish such a tack. "I love It"

@RandysFiftySevenChevy 3 жыл бұрын

Mike when you first started this series on Scrappy I though...I'll just skip through the boring parts. Damn I couldn't find any boring parts on anyone of your videos. Great content and kudos to the editor.

@aciagriculturalconstructio2264 3 жыл бұрын

Just when i thought you couldn't up the game anymore you went and made that hangar a better place by injecting laughing gas into the work place.

@bassmandave5865 3 жыл бұрын

Watching Scrappy being built has been highly educational and entertaining. Thanks Mike!

@GaryMCurran 3 жыл бұрын

Mikey, you are totally over the top, and glad you are because YOU might blow up if you hit the Nitrous at the wrong time. Seriously, you are an amazing engineer, builder, designer, whatever, and I'm glad there are people like you in this world!

@CanAmLane 3 жыл бұрын

I was just thinking to myself minuets ago, “it’s been a wile since I’ve seen any new scrappy videos..” Back to work 🤙🏼

@mrkawasakikx500 3 жыл бұрын

Also me lol

@donvito204 3 жыл бұрын

Same here

@tinolino58 3 жыл бұрын

Same here! Back to work 😁

@chickendog3042 3 жыл бұрын

Every time I see you uploaded it makes my day! I find it amazing that the fule nitrous atomizers are very similar to an injection plate in a rocket engine. What cool engineering went into making that piece and how many uses it has.

@Niko-iw1sr 3 жыл бұрын

This series is legitimately my favorite thing to watch on KZfaq! Incredible work Mike, always looking forward to the next Scrappy update!

@matthewpellegrini2740 3 жыл бұрын

As a mechanical engineer and private pilot myself, I aspire to be as competent in engineering and flying as you are. Very inspirational!

@andersonnettleship845 3 жыл бұрын

Can’t wait to see Mikey and Scrappy hanging on the prop imitating a helicopter while Mike is holding the Nitrous switches with a big grin!

@f.dt.f3965 3 жыл бұрын

...can you say ..MOONSHOT...

@MrGaryGG48 3 жыл бұрын

@@f.dt.f3965 I had to laugh when he repeated the comment, "...I don't know if I'll ever use it." Riiiiight!! Back to that reference to the Scrappy "Helicopter take off!" ;^)

@ColeAviation 3 жыл бұрын

I LOVE my Grip Lock Ties! 😁👌🏼👍🏼

@skylane1829 3 жыл бұрын

Love your enthusiasm and passion toward aviation. Loving every video and waiting like a proud papa...........

@kurtboginski507 3 жыл бұрын

Mike Great to watch you work. You are a real inspiration and I find myself spending more time in my workshop. Great explanation on the NOX system and it's dos and don'ts. Keep em coming going to be great to see Scrappy fly.

@judgetk8327 3 жыл бұрын

Dam your doing a nice build! Your a smart man Mile and it's a real treat to watch you. Beautiful workmanship.

@Russellsperry 3 жыл бұрын

I just watched another great video, and all I can say is “I WANT TO BE LIKE MIKE!”

@Heyemeyohsts 3 жыл бұрын

Much better than the other Mike

@Russellsperry 3 жыл бұрын

@@Heyemeyohsts / ABSOLUTELY

@jlamarche1088 3 жыл бұрын

That nitrous kit is ridiculously awesome.

@fredmertz6480 3 жыл бұрын

Have a couple of questions. 1. Will you be adding an in flight refueling port on top? 2. Will your fuel tank seep until airborne where friction heat will seal it? Lol... Great video as always.

@lmartinez3633 3 жыл бұрын

I can’t wait to see Scrappy flying...well, I can wait because of the genius of MP

@DIvonBriesen 3 жыл бұрын

"that system doesn't exist for an aircraft so i gotta make one" - classic!

@tywebb9879 3 жыл бұрын

Mike, the intro was awesome, great explanation of piston ring gap. Not many fully understand so the caution was wonderful.

@boe7613 3 жыл бұрын

Thanks again MP for the education 👍😊 And I can't wait to see the wings 😁👌

@rpierce8206 3 жыл бұрын

Mike, I love your videos! You got me hooked with Draco, and I’ve binged on Scrappy from the beginning in the last week! I’d love to ride in Scrappy once it’s finished!

@benwells5625 3 жыл бұрын

I don't know anything about airplanes I started watching this about a year ago just looking for something on KZfaq you've got me hooked can't wait to see this thing fly

@paulhansard948 3 жыл бұрын

Mike, you have inspired me to build my own plane from plans of course. Watching you has been an educational experience. I hope one day I get to see scrappy up close at an event.

@Jim_Austin 3 жыл бұрын

The complexity of all this is just mind-boggling. I’m enjoying watching it but I’m glad I don’t have to deal with it myself.

@ChargedTTq 3 жыл бұрын

I wonder if Mike has ever been approached about a show with Discovery or History channel. He has the charisma and topic to have a hit show on either!!

@kylebarton3532 3 жыл бұрын

I was just thinking about that this morning if mike just did a show on aircraft builds, he already has a waiting list on future builds it would be pretty cool

@2715bunky 3 жыл бұрын

I'm still shocked that after I dreamed about Scrappy having NOS for performance at altitude, that you actually did it! This is too exciting to me!

@andrepotgieter9691 3 жыл бұрын

Mike, I think you are the General Aviation version of Chuck Yeager. So interesting to watch you build Scrappy and surprise us with things like adding Nitrous. Love it. Thanks so much

@seregarn 3 жыл бұрын

Where......where have you been all of my time on this site. These videos are awsome and that plane looks wicked.

@michaelgillogly3551 3 жыл бұрын

I just hope the WINGS are getting done secretly in the background, Just wanna see the thing fly so bad

@upkpoxer 3 жыл бұрын

Thanks for sharing! Love your energy and positive mentality.

@Mike7478F 3 жыл бұрын

Watching Mike at work departing knowledge on engines, parts, nitrous, voltage ⚡, carbon fibre design and manufacture etc etc etc etc, could give us some insight into what it could have been like back in the early 40 s with Oppenheimers team. The energy of smart people creating things and testing them under secrecy to create unimaginable energy. Mike you are an amazing gifted and talented person. Wow. I wonder if it really dawns on us all just what we are watching being created here. It's special. And we have it on file to refer back to again and again. 🤔✈📹✔🤓

@mickmuzzmkmz1628 3 жыл бұрын

I know you were really happy and excited to see the NOS kit working (and rightly so), but I think there was a bit of laughing gas inhalation going on there too!🤩😆

@Dave-gf3kd 3 жыл бұрын

Another follower made this comment a few weeks ago...and I think it’s PERFECT: “just an average guy on your home planet”

@phoenixrising4573 3 жыл бұрын

FAA: "so.... why do you have a cub with a gargantuan race engine and NOS? You're not planning to dominate some STOL drag are you?!?" Mike: " uh...no, I don't do those...I....uh *sweats profusely*...floats... that's why, short take off on floats!"

@jimmymcdougald692 3 жыл бұрын

MP: "Oh Yah... I almost forgot, I'm also Into High Altitude Flying and STOL On Remote Glaciers in Alaska, You Know Simple Stuff!"

@f.dt.f3965 3 жыл бұрын

you know.... ive seen float planes in STOL competitions...

@jameswolfe7485 3 жыл бұрын

Mike, you're a crazy man. I like it! I particularly admire your ability to see the fix to a problem that has not yet arisen (but that surely will without that forethought) and make a part that solves the problem and looks good doing it! Awesome!

@tonybrock5288 3 жыл бұрын

Thanks goodness you are experienced and a perfectionist! You keep adding multiple complex points of failure that would scare me and keep me up at night ....

@mrkawasakikx500 3 жыл бұрын

Man I dont mean to complain, but I need another video already lol back to work jkjk.. such a awesome build you are taking us on. I'm always so stoked when I see a notification for another video. Cant wait to see this cowl you do and most def cant wait til you get started on the wings. That's a bada$$ bush plane. Love and peace

@Journeyman1642 3 жыл бұрын

Ron has the greatest job in the world!

@CS_247 3 жыл бұрын

I dig the "GIVE ME EVERYTHING!" Whoosh, and then the mad scientist laugh!!!

@ChainsawFPV 3 жыл бұрын

You never stop impressing Mike!

@tima9531 3 жыл бұрын

Nice buddy!! Can't wait to see the final product and the flight testing. (Hopefully soon) your doing a great job and remember get back to work. Stay safe and have a lot of fun!!

@flyingtigers7856 3 жыл бұрын

Outstanding Mike, you are an inspiration!

@richardstalter5461 3 жыл бұрын

I fear for the day these videos end. I do not think my brain will survive the withdrawal. Mike's enthusiasm is my drug of choice.

@91rss 3 жыл бұрын

One thing on installing a bunch of lines. we used a red marker to mark the fitting when tightened, then the rechecker uses a black one , so you know when something has been done twice.