Most Realistic Carbon Fiber Wrap I've Seen!

Рет қаралды 1,106,853

2 жыл бұрын

Material used: vvividshop.com
More training: www.vinylwraptraining.com
My Favorite tools and accessories I use at my shop:
Heat Gun (Instant heat, no waiting) - amzn.to/3WWHmNC
3 Pack Squeegees (soft, medium, hard) - amzn.to/450sOP2
Wrap Gloves - amzn.to/4aDRAWt
Knife (Have not found anything better) - amzn.to/3KghNj8
Hex Garage Lights (perfect temp for detailing and wrapping) - amzn.to/3wPlut1
Rolling Bench Stool - amzn.to/3UZO1Ej
Tool Cart - amzn.to/44X3nxT
Scratch-safe Ladder - amzn.to/4aDaAEn
Headlight Tint (I put that %^#-$ on everything) - amzn.to/4bYoMZB
Knifeless Tape - amzn.to/3Vg46XK
Wrap Sticks - amzn.to/3wZK1eM
Magnets - amzn.to/44X3cCF
Many of us have been on an endless pursuit to find the most realistic carbon fiber vinyl wrap. Personally I've searched high and low and now I believe that I've finally found the absolute best looking carbon fiber vinyl in the world.
These days it doesn't make much sense to buy real carbon fiber due to most vehicle panels being made out of composite or aluminum they are extremely light weight. Buying aftermarket panels is usually very costly but also runs the issue of fitment not being original.
Are you looking to learn how to vinyl wrap on a professional level and make money doing? If yes, then check out my website ckwraps.com/ and sign up now to get one month free!
For information on PPF workshops email nav@ckwraps.com
Sign up for in person workshops where class sizes are limited to 6 people. The smaller class sizes allow me to give each student extra attention along with knowledge and experience.
Certified Training visit www.vinylwraptraining.com/
Email nav@ckwraps.com to order Vvivid Vinyl and SAVE $$
Pickup all your vinyl wrap related products from my shop here ckwraps.com/shop

Пікірлер: 1 200

@CKWraps 2 жыл бұрын

ckwraps.com/ for in depth how to vinyl wrap training videos.

@wayneyd2 2 жыл бұрын

What's the cost?

@Chris12211 2 жыл бұрын

I think there’s a laser etched carbon fiber ppf which is now available.

@_john_rick_ 2 жыл бұрын

Why didn’t you do the V pattern on it

@omarcortez6684 Жыл бұрын

How you found any good honeycomb carbon fiber gloss wrap? As good as the material this video shows for the regular carbon fiber?

@RealReeseElDon Жыл бұрын

@@Chris12211 neither of the links work where can I find the updated version of this

@reaxions 2 жыл бұрын

Please stop making it look so perfect and easy. I can't wrap anything with curves, so nobody can. This is clearly a combination of art and science. Brilliant work!

@motormax6048 2 жыл бұрын

If u haven't already try good quality wrap it makes it a lot easier

@user-kk4hv4mq7c 2 жыл бұрын

Def true. I specialize in paint correction and work with a bunch of professional wrappers. These guys are all OCD freaks

@UYC. 2 жыл бұрын

True

@felipebaez3512 2 жыл бұрын

I just glance over at my brand new roll of wrap and it instantly bubbles up and gets creases

@urban_outlaw_5395 2 жыл бұрын

@@felipebaez3512 😂😂😂😂😂💀💀

@zackcrane224 2 жыл бұрын

This is the first video of yours I've seen for wrapping and sir you have done an amazing job very descriptive and detailed love this man keep the content coming!!! Especially for someone who's a beginner warper like me!

@YourP4P 2 жыл бұрын

You're killing it Chris. Love the channel growth.

@nickrendell4300 2 жыл бұрын

A real pro at work on car wrapping, great insight on how you wrap a vehicle. It shows you have many years experience and knowledge on wrapping.great video.

@lostchild488 2 жыл бұрын

It does have depth to it! Looks real! Might be a cool idea to compare side by side, real CF and 'sticker' CF!

@elysekitt3731 Жыл бұрын

I wrapped my first hood in the Vvivid carbon fiber wrap it’s a 350 Z with 10 vents to cut out. It was HARD but turned out amazing wish I could post it. I was able to teach myself to vinyl wrap by watching countless hours of your videos and you are a true artist, a badass and inspired me to finally do what I’ve been wanting for so long when I thought it was impossible. I’m going to wrap my whole beemer now in satin gold this weekend and super excited 😊 I wish you did wrap classes in the US I would pay top dollar to take your class

@cvgxnie888 Жыл бұрын

this gives me hope that i can learn how to wrap my saab 9-3 2.0t hood and roof black, i’ve already wrapped some interior pieces and i think i’m gonna try my mirrors and then go full send on the hood!

@173customdetailing9 2 жыл бұрын

Love your passion, you've made me have a go at wrapping,I'm not perfect but for my first go I had some good comments from my neighbours thanks for the insperation 👍

@c7dermatome 2 жыл бұрын

So beautiful! I almost couldn't watch when you hit it with a steel brush! Great to hear about CK wraps own brand of PPF, will definitely be my product of choice from now on!

@1derman287 Жыл бұрын

I rarely comment but I couldn't resist. This video is so entertaining. I love watching a true artist at work. It was so calming. I'm getting so many Bob Ross vibes. Awesome vid man!

@davidnguyen4888 2 жыл бұрын

STEK Carbon Fiber fashion film is best I have seen in person. The film has a lot of depth and layers to it. Pretty thick and has a lot of protection. Thanks for showing this example. This one looks good too.

@ebbust6181 2 жыл бұрын

Is this the one he used? Stek Carbon fiber?

@davidnguyen4888 2 жыл бұрын

@@ebbust6181 no. STEK is a fashion ppf

@ScottO84 2 жыл бұрын

Agreed. STEK's DynoCarbon PPF is king in terms of look and depth.

@urenaanthony91 Жыл бұрын

@@ebbust6181 What wrap did he use?

@BrokecaR34JC Жыл бұрын

@@urenaanthony91 Tiny bots tinybotvinyl.com/collections/carbon-fiber North america shipping only it seems though

@kevin-haggerty-khmp 2 жыл бұрын

Yea hbuddy!! I have been watching you for a while now and I see your hard work, dedication to the game and always pushing things to the next level. Cograts on the new product launch dude keep crushing it daily!!!!!!!

@paulbaluch439 Жыл бұрын

I got to say from a guy that worked with real carbon fiber all the time making race car parts I would say that's one of the best vinyl carbon wraps I've seen I have worked with 1080p myself but that material you're working with really does give the real carbon look thanks for doing the video I enjoyed it and you do a great job rapping it's an art😎👍👍👍🏁🇺🇸

@tmansim21 Жыл бұрын

I'm blown more and more away by that film as I watched more of the video, also you make wrapping cars look literally so easy. I feel less intimidated by the idea of doing my own hood or mirrors after watching but I know deep down that the only reason it looks this easy is because you're obviously so skilled at wrapping it's ridiculous lol

@mooshoodragon 2 жыл бұрын

You know the content of a video is great when you can watch the entire hour long video and not be disappointed one bit. For yeeeaaars I've been hoping for a cf wrap worthy of being put on the exterior of a car. I've seen a few that look pretty decent on small interior pieces but just don't compare to the real deal when outside under the sun. But man this wrap looks amazing. I'm considering not only for the $ saved in buying a hood but also the space saved in my garage where the oem hood and trunk would be if I bought carbon fiber replacements.

@seankaine2411 2 жыл бұрын

I totally agree with you. By far the most realistic carbon fiber wrap. I'm going to email you in regards to wrapping my front bumper on my 94 Honda civic coupe. I have real carbon fiber hood and fenders so a wrapped bumper would look sick happy I found this page.

@doug4182 Жыл бұрын

You are an artist. I've wrapped a bunch of small interior parts with success. You are the Bob Ross of vinyl...lol. Very calm and patient. I was torn between a factory hood with a scoop, or a carbon one. I was concerned about fitment issues. Now I can have the best of both worlds.

@doug4182 Жыл бұрын

You show adding the paint protection film at the end. Is that something you would recommend? It seemed to remove and surface scratches...

@n300zx931 2 жыл бұрын

This is amazing. Carbon parts are so expensive for my motorcycle, but this looks plenty real. I'd love to use it on the parts.

@aleksandrovichkonstantin Жыл бұрын

When the car is in the sun, the vinyl peels off the surface. I checked it all out 🤣

@Soundsaboutright42 2 жыл бұрын

Definitely the most real looking I've seen by far

@bekimveseli4182 2 ай бұрын

link to buy the vinyl?

@dmcguire1442 2 жыл бұрын

Great instructional & informative video ! Well done. Thank you.

@jstmag Жыл бұрын

Can't wait for you to release your own products. Your one of very few that I trust about wrap information.

@gabrielthompson3853 Жыл бұрын

Also, this stuff is so good I was putting it on top of my UV damaged door as a temp fix and looking at the real CF immediately next to this wrap, it was nearly indistinguishable. Very impressive.

@TopDrumCorps Жыл бұрын

What’s the brand? I didn’t hear him mention it in the video

@dragosmarian06 Жыл бұрын

What brand is?

@gabrielthompson3853 Жыл бұрын

@@dragosmarian06 TinyBot is the brand. It’s been a while since I ordered it on Amazon but I’m pretty sure they call it 6D carbon fiber vinyl wrap. It’s good stuff man but just as an FYI I don’t recommend using it for smaller surface areas with a lot of tension like door handles. Because it’s so thick compared to normal single colored vinyl that you can just get from Amazon and it peels on the edges. If you do use it for something like that make sure to use an overlay to cover the edges if possible kind of like putting tape on it to cover the edges but with a different thinner wrap. I used this stuff in my door handles and used some cheaper black vinyl from Amazon to put on the inside as an overlay and it’s held up great for the last 5 or 6 months since I put it on.

@dragosmarian06 Жыл бұрын

@@gabrielthompson3853 thx man.

@SpeedCultureStudios 2 жыл бұрын

Really surprised how good it looks. I’ve been hesitant to do a carbon wrap hood on my car because none I have seen look very good. This one however may have changed my thinking!

@urenaanthony91 Жыл бұрын

Where can I find.this wrap?

@joegamas1194 2 жыл бұрын

Wow what an awesome video, awesome product…it looks so real and amazing, your an awesome instructor and teacher, thank you so very much

@bigdaddy741098 2 жыл бұрын

Wow that looks amazing, thanks for taking the time man 👍👊

@brandonjohnson3566 2 жыл бұрын

My homie straight threw down a lowpro diss to all professionals complaining a vinyl is too difficult then says that's gonna cause some problems. Hahaha savage mode.

@andrewsimmons3344 2 жыл бұрын

As someone who does have a real carbon fiber hood this does look real and honestly a killer alternative that I would recommend. Awesome video as usual from you love your content!

@CKWraps 2 жыл бұрын

Thank you and I appreciate the honest feedback. I've seen many carbon fiber hood on my life. Some look good, some don't. The same goes for carbon fiber vinyl. Unfortunately I didn't have any real carbon fiber at the shop to compare it with but I'll have some next time.

@HotBoiMack 2 жыл бұрын

I just tried mine for the first time and it's not the easiest. I got a good result but I learned a couple techniques from your video that could've made mine better. now I'm goin back out to try again.

@G1Z 2 жыл бұрын

I watched so many of your videos and knew I was ready! Went and spent all my money buying some wrap because it’s so easy to DIY obv! Well, I wasted a few yards and more than a few hours, and the rest of the roll is still in my garage.

@ItzDiizy 2 жыл бұрын

Just started watching, love what you do and your genuine care for it, but I gotta show some appreciation for the 4k video, looks BEAUTIFUL and not enough people use it so i can make use of my monitors true resolution lmao

@CKWraps 2 жыл бұрын

I upload everything in 4K now. There's no better way to watch unless you don't have the screen resolution.

@ikepre 2 жыл бұрын

So what did Enterprise think when you turned the car back in? Looks nice, you make it look easy…

@CKWraps 2 жыл бұрын

I removed it before bringing it back lol

@williammdonofrio 2 жыл бұрын

The detail in that wrap is amazing.

@Overpar73 Жыл бұрын

A real expert showing us the tricks, thanks!

@Mikrrii Жыл бұрын

I always hated carbon wrap because every single one that i saw in person from a mile away you can tell that’s just a wrap and it always looks so cheap , especially in interior trim wrap. Not to mention the matte carbon was just horrible to me but this wrap just looks so realistic that its really crazy. Awesome work, top 5+

@patrickpimentel932 2 жыл бұрын

Hi Chris. What’s the brand name of this specific carbon fiber that you used?

@richsidwell9367 2 жыл бұрын

Tinybot 6d carbon fibre

@k1ortia 2 жыл бұрын

Watched this start to finish as I'm interested in starting a business in this.. looks amazing fair play.

@BreakerBreaker1320 2 жыл бұрын

WOW. Glad I waited for carbon film. I want to wrap my truck shell and now I am ready to commit to it.

@Stinky_boyy Жыл бұрын

Thats actually insane how realistic it looks. I was just about to buy a carbon fiber hood now im rethinking it lol Side note: is there a link to this warp somewhere?

@jpmoney305 Жыл бұрын

What product is this? I don’t see a link to it or a name mentioned

@Stinky_boyy Жыл бұрын

@@jpmoney305 it’s tiny bit vinyl not sure of the exact carbon wrap it is though

@boooost3d Жыл бұрын

Same. Where can we get the wrap

@nighrow5 Жыл бұрын

@@boooost3d I wish this question was answered by now:/ can’t really hear where he got it from in video lmao.

@josemendez9371 Жыл бұрын

@@nighrow5 I heard tinybot 60 carbon fiber I found it on safari

@mansochannel9199 2 жыл бұрын

That’s impressive! Where can i buy some of that vinyl?

@CKWraps 2 жыл бұрын

Tinybotvinyl.com

@XxXNyMpHoXxX 2 жыл бұрын

@@CKWraps Which one out of the 4 on the site is the one??

@cptrey 2 жыл бұрын

@@CKWraps which specific vinyl? maybe post a link?

@remo9310 2 жыл бұрын

@@XxXNyMpHoXxX Gloss 6D Carbon Fiber

@remo9310 2 жыл бұрын

@@cptrey Gloss 6D Carbon Fiber

@jayceecombs6887 Жыл бұрын

Very Detailed! Really kept my attention. Kind of like memorized! Thank you, J

@Bigalinjapan Жыл бұрын

Thanks for highlighting the scrape the paint issue. Was really wondering about it.

@benho1212 2 жыл бұрын

what brand is that?

@nigelfoxwell9423 2 жыл бұрын

"best carbon I've ever seen" mumbles brand once in 53 minutes

@munki2992 7 ай бұрын

Tinybots said very clear 😂

@UnknownFaks 2 жыл бұрын

Wow that's nice!!! Made it look easy too!!

@ADVShadow 2 жыл бұрын

This is just a masterpiece of handwork… I want to do the same on my car but I don’t know of any good place here in Miami to do something like you just did… I loved… thanks for sharing this 🙏🏻🔥🔥🔥✌🏻

@sonthelow 2 жыл бұрын

Hey Chris, I’d love to know the brand of this amazing carbon fibre !

@supjxy 2 жыл бұрын

I think tiny bot 6d

@fernandodelarosa6576 Жыл бұрын

I'm interested in this wrap too. Haven't found it yet

@CB-uh6vv 2 жыл бұрын

Where did you purchase it??

@flixtv9030 9 ай бұрын

fr, why show it but not where from

@munki2992 7 ай бұрын

He said tinybot goofs

@SladeWashingtonSVR 2 жыл бұрын

Amazing! Bravo! You've done done it again!

@nutsmonkey787 2 жыл бұрын

Crazy how I found this video while looking for nice carbon fiber vinyl to put on my Jaguar. Great video good work!

@miguelescobedo4995 2 жыл бұрын

What carbon fiber wrap is this?

@CKWraps 2 жыл бұрын

Tinybotvinyl.com 6D carbon fiber

@miguelescobedo4995 2 жыл бұрын

@@CKWraps thank you sir

@C9H0S Жыл бұрын

This guy is the ultimate professional. 👏🏾🙂

@growingwithjoy Жыл бұрын

🔥🔥🔥🔥🔥🔥 just got my car wrapped, gonna start posting it on my channel.. this was amazing to watch!

@Ruthlessbone 2 жыл бұрын

"What's a real carbon fiber hood gonna cost you?" Well, since you're wrapping it instead, the labor for it is gonna be kinda the same lmao. So same difference if you ask me.

@17Nesti 2 жыл бұрын

Its a quarter of the price depending on the hood and shop. Just some friendly advice

@domrodriguez9565 2 жыл бұрын

Labor is no where near the price of a real carbon hood lol what are you talking about ?

@Blue__244 2 жыл бұрын

@@17Nesti bruh i can get a carbon fibre hood for my car for 570 €

@toddbeal4373 2 жыл бұрын

Why do you need a shop to put on a carbon fiber hood?? Do it your self

@Ruthlessbone 2 жыл бұрын

@@17Nesti nowadays good wrappers charge an arm and a leg for wrapping just FYI. They gotta make a living too.

@justingillis6150 2 жыл бұрын

new respect for your craft. I tried because I watch your videos. you make it look way too easy. it's not easy at all unless it's flat and that still has its problems. good shit keep up the videos for people like me. thanks brother

@warrenstilwell2022 Жыл бұрын

After seeing this video I bought this TinyBots carbon fiber wrap for some interior pieces. Great stuff. I wouldn't consider anything else. Although I had a little difficulty getting the cap off.

@theayatollahofrockandrollah 2 жыл бұрын

It was a pleasure watching you work Sir

@fitz9905 2 ай бұрын

Excellent video, you are really talented, made it look easy! Thanks!

@hektor010101 2 жыл бұрын

Best carbon I've seen. I'll be trying that out on my new project. Cheers

@inthelifeofleif8268 2 жыл бұрын

What’s the brand

@Sourpusscandy 2 жыл бұрын

Looks totally genuine CF!

@raynierdel2827 Жыл бұрын

Love how u explain everything in details .👍💯

@shanestewart9505 2 жыл бұрын

I’ll be watching a hundred hours of your stuff. I’m attempting my first wrap soon, but for now I will keep tuned in.

@anders.svensson 2 ай бұрын

Thanks for sharing you excellent skils :) Great tutorial by a master!

@jessb8419 Жыл бұрын

Amazing! Thanks for your AWSOME video!

@Rocky-sy9zt 2 жыл бұрын

WOW! Your work is insane, you do it with no effort! Seriously, You had more trouble opening the hood than wrapping it. You're definitely skilled! Also, yeah, definitely way better than the other carbon look wraps I've seen.

@SHADOWDENNIS 2 жыл бұрын

Awesome video Chris! Keep up the good work! Greetings from Croatia!

@bigm7640 Жыл бұрын

Bad ass dude!! Make it look too easy. Glad I got you as my mentor as I begin this wrapping journey. 💪

@mauriciocarrillo6441 2 жыл бұрын

Gran trabajo se ve la alta calidad y la dedicación en el detalle y destreza x eso se ve fácil muy amena la explicación

@blairguinea6811 2 жыл бұрын

The wrap Master !, thanks Chris

@eadgbefreak 4 ай бұрын

Great video! You make it look easy!

@dragnvortexlt-1549 Жыл бұрын

Beautiful job, it looks Flawless .it really looks real

@Spooky-br8jg 2 жыл бұрын

Wow..... That looks amazing

@Paul-ItsMy911 2 жыл бұрын

Another quality vlog 👌🏼👍🏼👊🏼

@magsacad 2 жыл бұрын

That's a dope finish.... Nice work👍🏽

@FuckingFlowie Жыл бұрын

Omg. thats insane looking! Thanks for the vvid

@Wwiaftm69 Жыл бұрын

Why the hell is this so satisfying to watch . Yea i need to go grab myself some wrap and have fun

@chrisf8685 2 жыл бұрын

Nice I requested this video, I’m glad you enjoyed the look of this wrap as much as I do!!

@CKWraps 2 жыл бұрын

Happy to do this one man. Was blown away by the finish. This is the kind of film you make work even though it might not be perfected yet. In the grand scheme of things, all brands have a long way to go to perfect their films.

@Mystic-on5xy 3 ай бұрын

What brand dod he used??

@TreyFreeze 5 ай бұрын

I like it. Nice job bringing value to your industry.

@dakingakings7184 2 жыл бұрын

Bro, impressive work. I put carbon fiber hoods on my several of my cars. But if it looks this good I will start wrapping them instead.

@ouah8ter667 8 ай бұрын

Thats a really nice carbon wrap, and its not hard to tell your a pro bro, you make it look easy, well done 👏

@kdash0213 2 жыл бұрын

I need this on my car! great video.

@otallono Жыл бұрын

Watching you do this makes me want to work for you, looks like a fun job

@CRYPTOSLO_OFFICIAL 2 жыл бұрын

Looks fantastic!

@glenbooth7903 2 жыл бұрын

That looks pretty good, quite convincing 👍👍👌👌

@anthoneyking6572 2 жыл бұрын

Wow man I got my Hood Done with the good but Flat Carbon That New Stuff Looks so Nice as you say it even has the strange shade changes that most Carbons have really Nice Product for sure thanks

@lummy321 2 жыл бұрын

Brilliant CK Boss 👑💕❤️🙏🙌 looks like 7D carbon fibre buddy.... Insane

@torriewalker2820 Жыл бұрын

I'm getting my car wrapped in this carbon fiber wrap now. Appreciate this vid. I can't wait until it's done.

@fishandreptileinfo Жыл бұрын

wow, amazing video. The hour flew by.

@blakskot 2 жыл бұрын

Blessed love Family! Thank you for everything you teach. I’ve tinted for 30 years from Hollywood to Oahu and Seattle. Would love too share what I’ve learned as well as learn more. Link Up! I’m half Canadian 😆💚💛❤️

@ThePatMarky 2 жыл бұрын

This Wrap seems legitelly awsome ! Can't wait to see that wrap covered with PPF ! the ppf over it should give the final look even deeper.

@spiv262 Жыл бұрын

Great video man, good job.

@bigman7570 Жыл бұрын

I just got this wrap and going to wrap my hood and spoiler this weekend

@josemarrero2800 Жыл бұрын

This definitely looks like real carbon fiber, only issue I would have towards it is when you stretch the vinyl it messes with the weave pattern. You can see it at @28:05 where you got the bottom middle moving towards the right while the middle top is straight.