Motion Windows Bunk Installation | Ram ProMaster Van Build Series | Van Life

Motion Windows Bunk Installation | Ram ProMaster Van Build Series | Van Life | Solo Female Traveler

Рет қаралды 23,538

Күн бұрын

In this video I walk you through step-by-step on how to install two bunk windows on the driver and passenger side of my Ram ProMaster. The windows are by Peninsula Glass and purchased from Motion Windows. I am excited to have more natural light, added ventilation and a better vision of my surroundings.
Tune in to my next video where I share how I installed my Van Windows Direct solid sliding door window!
Until then, be sure to subscribe to my channel and turn on notifications so you don't miss a beat.
For more frequent van life updates, connect and interact with me on Instagram and Tik Tok @LaurenLawliss.
Instagram: / laurenlawliss
Tik Tok: / laurenlawliss
Thank you for your support - Venmo: www.venmo.com/u/LaurenLawliss
Aside from windows, how else would you make this metal box feel more like a home?
Let me know in the comments below.
Thanks for being here :)
LINKS TO PRODUCTS AND TOOLS BELOW!
Timecodes
0:00 - Intro
0:25 - Why, Brands and Styles
2:06 - Products and Tools
3:02 - Removing Support Beams
3:31 - Making a Template and Determining Window Location
4:42 - Drilling Pilot Holes
5:03 - Transferring the Template to the Outside
5:27 - Prepping for the Cut
6:12 - Cut Pattern
6:39 - Drilling and Cutting
7:24 - Rust Prevention
9:17 - Prepping the Window for Installation
10:46 - Installing the Window
11:56 - Closing
Affiliate Links for Products and Tools
Motion Windows:
Rust-Oleum Primer: amzn.to/39CVW6R
Rust-Oleum Protective Enamel: amzn.to/3N7Qu9B
Painter's Tape: amzn.to/3nolrMx
Bosch T118B Metal Jigsaw Blades: amzn.to/3y9TkH5
Metal File: amzn.to/3HGH2ZM
Bosch Jigsaw: amzn.to/3Oy5Khh
Foam Brushes: amzn.to/3O9WBvj
Dewalt Cordless Drill Combo Kit: amzn.to/39Gd0Zv
Expo Markers: amzn.to/3be1BR6
Safety Glasses: amzn.to/3OaEfKV
Micro Fiber Cloths: amzn.to/3QN225k
6-Foot Ladder: amzn.to/3n7Zwc0
Broom and Dust Pan: amzn.to/39KHREs
Shop Vac: amzn.to/3y8A64l
Magnet Sticks: amzn.to/3y336cP
Hammer: amzn.to/3OG1xbi
Chisel: amzn.to/3bs4Q7E
Putty Knife: amzn.to/3QT1eeW
Lacquer Thinner: amzn.to/3xVyjyk
409 All-Purpose Cleaner: amzn.to/3xXbVEN
Gorilla Duct Tape: amzn.to/3NDArAR
Disclaimer: I am not a professional. This information is what I have gathered from my own research on the topic and is only intended for reference. Further research should be conducted for your specific project based on your needs. Please note, not everything you see online is the correct or the only way to do something. Contact a professional if in doubt. Following an incorrect procedure could lead to a dangerous and ineffective result.

Пікірлер: 77

@themetalmaiden7462 2 жыл бұрын

Another great video! You could try stuffing those holes with rags to keep the metal shavings out, or tape over them to keep the shavings out. Also, you could try some fine jigsaw blades vs the mediums. The saw won't jump around as much with fine blades, and the edge will be cleaner. Keep up the great work ;)

@LaurenLawliss 2 жыл бұрын

Oh I LOVE that idea of taping over the holes. Thanks for sharing!!!

@themetalmaiden7462 2 жыл бұрын

@@LaurenLawliss You're welcome :) Can't wait to see what you do next.

@rusty4053 2 жыл бұрын

Well researched, well planned and well executed. Looking forward to the rest of the build. :)

@LaurenLawliss 2 жыл бұрын

Thank you! That means so much☺️

@dougsagon2156 2 жыл бұрын

If you haven't seen him. You should check out Humble Road. He also does conversions, and is very technical and thorough like you are.

@LaurenLawliss 2 жыл бұрын

I love his videos! Thanks for the recommendation☺️

@carls4552 2 жыл бұрын

Very nice Lauren. Very interesting and informative. Great job. I'll be back for more. :)

@LaurenLawliss 2 жыл бұрын

Thank you and welcome!☺️

@grayeagleswolves 2 жыл бұрын

Good morning Lauren I just found your channel and love how you explain every thing I will be watching all your progress

@LaurenLawliss 2 жыл бұрын

Thank you so much! Happy to have you along for the journey😄

@rickdean2141 2 жыл бұрын

Another awesome video with your amazing attention to detail

@jasonjones5213 2 жыл бұрын

Hi, just found your channel.You explain things very well.Can't wait to see the rest of your build.Good choice in vans too.

@LaurenLawliss 2 жыл бұрын

Thank you! Yes, I love this van. It is perfect for my needs.

@MrDwinstead 2 жыл бұрын

Great video! Lots of good info and tips. Loved how you detailed the work you are doing. I think that should be helpful to anyone else doing. Definitely subscribed to your channel and turned on notifications. I am anxious to see your progress.

@davidvincent2nd757 2 жыл бұрын

For me personally I’d never have windows in the back . Screams someone’s living in there . Another fabulous job of talking people through the process . Great that you shared the different places to get the windows . Of course the most important thing you taught people in this video which I’ve personally always found in life to make things much easier and better was “ just lick it “ .

@josephj7991 2 жыл бұрын

The whole "stealth van" concept is kind of gone now? #van life is getting common so I don't worry about looking "stealth?" Once u add roof vent and solar they already Know. White urban Stealth work vans may work in cities but are even More obvious out in the country? My dark grey Promaster blends much better especially in shade area is even better than black.

@leerfarmer 2 жыл бұрын

Thanks for sharing, your van is looking great‼️

@LaurenLawliss 2 жыл бұрын

Thank you for following along😊

@blackphantom99 2 жыл бұрын

Fantastic explanation through the steps! Thanks for a great video! ☺️👍

@LaurenLawliss 2 жыл бұрын

Thank you😁

@LockerMart 2 жыл бұрын

Well documented and narrated.

@LaurenLawliss 2 жыл бұрын

Thank you!

@crazymichigander200 2 жыл бұрын

Alot of good and useful information. Like how you explain it in such detail even what tools and supplies that you would be needing. Doing an awesome job.

@LaurenLawliss 2 жыл бұрын

Thank you! Appreciate your kind words😊

@robertgermono1756 Жыл бұрын

best vlog ive seen how to install window love the equipment on the table ty

@LaurenLawliss Жыл бұрын

Thank you :)

@barrytimm5497 3 ай бұрын

You are a very impressive young lady. Well done! Your videos show excellent detail and indicate the thought and care you've put into this build. Very impressive!

@LaurenLawliss 3 ай бұрын

Thank you for the kind words🫶🏻

@mdrsecuritysystems 2 жыл бұрын

great work, looking forward to future videos :-)

@LaurenLawliss 2 жыл бұрын

Thank you for your kind words! Excited to have you along for the ride😄

@albertofernandez6814 2 жыл бұрын

I like how organized you are...

@AstrologerJoe 2 жыл бұрын

Nice going Lauren 🚌👍

@davidperez7260 2 жыл бұрын

GREAT JOB

@LaurenLawliss 2 жыл бұрын

THANKS!

@doc5081 4 ай бұрын

I love it! An Estwing used as a chew toy. So good. I have a couple myself. I dont know your background Lauren, but you have a very good builder IQ. Stay well Lauren

@LaurenLawliss 4 ай бұрын

Thank you!

@josephfalcone9569 10 ай бұрын

I want to do a window but didnt want to cut the wall. Now i might just try it that i have seen it done start to finish. Thanks again. I cannot say enough good things about these videos there great. You are an amazing Inspirational young lady thanks again for the videos greatly greatly appreciated. I will get around to watching each and every one of your videos

@LaurenLawliss 10 ай бұрын

Thanks for the kind words! You can do it. Don’t be afraid, take your time, measure twice and cut once☺️

@saleemalamri9719 2 жыл бұрын

Bravo 👏🏻👌

@jorge9947 2 жыл бұрын

Great video, very informative. I was scared as heck cutting a hole in my van.

@LaurenLawliss 2 жыл бұрын

Thank you! It's a relief to have it done but was very fun.

@DR-rx4lk 10 ай бұрын

You can use a magnet as well to pickup shavings. Even those magnet 🧲 on telescoping stick are a couple dollars online or harbor frieght. I use them when drilling into metal cabinets works well

@LaurenLawliss 10 ай бұрын

Yes! I thought I mentioned that in the video but maybe that was the fan install video. I’d recommend putting a plastic ziploc bag over the magnet so it is easy to clean. Love this!

@oscarcastillo6779 7 ай бұрын

U rock girl

@LaurenLawliss 7 ай бұрын

Thanks!

@chedadnacer7971 2 жыл бұрын

good lucks

@LaurenLawliss 2 жыл бұрын

Thanks!

@textilis5034 Жыл бұрын

Thanks for your videos, Lauren. They are excellent. I am wondering why you chose Motion windows over the bunk sliders from VWD. They seem to be more expensive, compared to ordering all 3 windows at once from VWD. Was it size? Availability? Something else? Thanks in advance!

@LaurenLawliss Жыл бұрын

Thanks for the question! It was more of a decision based on the brand. I had seen many videos of people installing motion windows and they only had positive things to say about the product. The install was easy, they look great and are high quality. I did purchases these months ago so I do not recall if pricing and availability was a factor then. Hope this help!

@textilis5034 Жыл бұрын

@@LaurenLawliss Thanks! I'm trying the Overland windows from VWD, which sound like they go in much like the Motion bunks. Fingers crossed!

@LaurenLawliss Жыл бұрын

@@textilis5034 Nice! Best of luck with the install😁

@robertbirch4163 2 жыл бұрын

You Rock, you sure you never done this before ?

@LaurenLawliss 2 жыл бұрын

Hahaha thank you! No prior experience, just countless hours of research the last 1.5 years before getting the van😅

@TinyTexanAdventures 5 ай бұрын

Do you have a link for the windows you used?

@LaurenLawliss 5 ай бұрын

They are from Motion Window by Peninsula Glass 😄

@olepickle5366 2 ай бұрын

Hello there, are having a water leakage after installing your bunk windows? How did ypu resolved the issue? Thanks in advance

@LaurenLawliss 2 ай бұрын

Hey! Zero leaks for me. If you are having leaks then I’d recommend identifying where the leak is coming from them add some sealant there. Good luck!

@eplumer 7 ай бұрын

did your van come with factory rear windows only?

@LaurenLawliss 7 ай бұрын

Yes! I ordered it to come with the back windows. I could have also ordered the van with a sliding door window but I originally planned on installing a window that vented, but changed my mind and went with a solid window instead😊

@user-ew1gf5pj1d 11 ай бұрын

🇰🇷 응원합니다

@olepickle5366 5 ай бұрын

Hello there please tell us how do you like your windows since the day they were installed to now , thank you so much

@LaurenLawliss 5 ай бұрын

LOVE THEM! Extra natural light, perfect for ventilation, and allows me to see more of my surroundings. No issues or complaints about them from me👍🏻

@olepickle5366 5 ай бұрын

@@LaurenLawlissi really appreciate your time effort to answer my question, more power to YTchannel

@LaurenLawliss 5 ай бұрын

Anytime😄

@waynelast1685 2 ай бұрын

I think Im getting a Promaster. Needs windows. How much does it all cost a) DIY or b) pay someone? Thank you

@LaurenLawliss 2 ай бұрын

Do it! Honestly prices will vary based on you wants/needs, products, brands etc. I’ve seen people buy and convert a van for $15k and some who do it for $200k. There are several ways to make it work so do what’s best for you financially. Generally speaking, DIY would be cheaper, but it is time consuming and you need to do your research for a safe and effective build out. There are pros and cons to either decision so choose based on your budget.

@waynelast1685 2 ай бұрын

@@LaurenLawliss oh sorry I meant windows DIY vs pay someone? Rectangular likes yours. Right now my van is considered” commercial “ until I put in two side windows and a bolted chair! Lol 😂

@LaurenLawliss 2 ай бұрын

Sorry, I misread that. I can imagine paying someone would cost more since you’d be getting the parts and paying for the labor. Personally I think anyone can install the windows themselves, but if it gives you a better peace of mind doing it professionally then go that route. I don’t know what the cost breakdown would be ☺️

@aseretaretrom4807 Жыл бұрын

Is your promaster a 136 wB??

@LaurenLawliss 11 ай бұрын

159🤗

@user-kn4mm8tx6y 8 ай бұрын

I see the world in your eyes.shamim💞👬💆

@chrism4452 9 ай бұрын

What size windows are these?

@LaurenLawliss 9 ай бұрын

When ordering through Motion Windows, I went to RVWindows.com, selected Ram ProMaster, 159” wheelbase and the first set of windows is what I chose. Interior frame is 35 3/4” x 9 3/4” and exterior flange is 37 1/4” x 11 1/4” (w x h). Hope this helps!

@oscarcastillo6779 5 ай бұрын

Hi amiga can you please send me the link of the windows u bought Thanks 🙏

@LaurenLawliss 5 ай бұрын

I had to take the link off this video per KZfaq guidelines but they are from Motion Windows by Peninsula Glass.