Main diffrence is in the amount of magnets and resistance to the elements. Outrunners tend to run smoother but from my expirience have worse cooling and are less resistant to the elements and impacts so perfect for planes or things that cna blow alot air on them providing beter cooling and taking full adventage of the gaps in the case allowing good air cooling to coils, also cheaper and easier to build. Inrunners tend to cog a lot more but are also easier to cool using external methods like radiators since the coils are on the outside and the case is stationar. Another benefit to inrunner is the fact they are sealed thanks to that they are ALOT more durable when it comes to resistance to elements like dirt so perfect for ground and naval use. Also if the inrunner was fully submerged its good to take it apart and let it dry inside.
@Ev0ltion Жыл бұрын
Damn i shouldnt write comments when im alf asleep. Its painful to read due to how chaotic it is.
@Am_anand Жыл бұрын
❤❤ motion rc just nailed it.... But the question is which is more efficient and Better...?
@MotionRC Жыл бұрын
It depends. For EDFs it’s normally inrunners but on prop planes outrunners are normally more effective.
@Am_anand Жыл бұрын
@@MotionRC thanks alot motion Rc❤️❤️❤️ And I am also planning to buy f22 Raptor 😁
@1212354a Жыл бұрын
70 of my planes are outrunners and two are inrunners: an old brushed plane turning a flywheel and a 70mm Yak-130. In both cases, the inrunner is much more efficient than the outrunner, but less torquey.
@fusionsvt005 ай бұрын
In my experience outrunners are just better. They run cooler and have more power per weight. Look for a helicopter 500 size and up helicopter inrunner motor, they are little to none vs every brand out has a outrunner for 500 size helis and up
@Vipcioo Жыл бұрын
This is what the current promotion of knowledge looks like. Dangerous shallows can be easily avoided by manipulating knowledge. This movie is a typical example. Made commercially and to look businesslike and professional. But it's very confusing. Because I have a different experience myself and I know that they don't tell the whole truth. So they do it for profit. Dot.
@geraldhaller9906 Жыл бұрын
Außenläufer haben mehr Drehmoment drehen etwas niedriger und deren Wirkungsgrad ist etwas schlechter meist knapp unter 90% aber über 80% . Innenläufer drehen deutlich höher haben etwas weniger Drehmoment und ein etwas höheren Wirkungsgrad meist über 90% .