Yamaha Drop-In LED Headlight Install
Рет қаралды 113,982
Күн бұрынA step-by-step walkthrough for installing the MOTODEMIC Drop-In LED Upgrade for Yamaha XSR900, XSR700, SCR950, and Cruiser models. See all of the models this upgrade fits here - bit.ly/yamupgrd
Where to Buy :: motodemic.com
Instagram :: / motodemic
#MOTODEMIC #YamahaXSR900 #YamahaXSR700 #DIY #yamaha #xsr900 #xsr700 #scr950 #yamahabolt #yamahastryker #fastersons #yardbuilt
@threethrushes 5 жыл бұрын
As a customer of the adaptive LED headlight kit for my XSR900 back in 2017 I can say these guys produce quality gear. Cheers from Czech Republic.
@tomparko1 5 жыл бұрын
This will be my next purchase. Completely transform the look. Cheers for the information.
@CorvusHyperion 4 жыл бұрын
This looks like the best quality LED headlight replacement on the market.
@BluecollarBeck 3 жыл бұрын
Clean & simple, thanks for the video.
@MrRtHemi 4 жыл бұрын
Wow that was easy! And looks amazing 😉
@Noastrenght 5 жыл бұрын
Might adjust the angle towards the road too. Oncoming traffic will thank you for that
@motodemic 5 жыл бұрын
Toby vertical adjustment shouldn’t be necessary but some fine tuning is always ok. The vertical adjuster is untouched during the install.
@user-sw2lv3zp6o 4 жыл бұрын
That looks good.
@Captn_Slow 5 жыл бұрын
Beautiful
@VendettaFXR 29 күн бұрын
I wish I would've found out about this instructions video prior to installing this. I figured, how hard can it be? Didn't see the 2 screws you included until after I was done, managed to strip a phillips bolt, and what took you 5 mins, took me an hour. Mostly because of that darn bolt. But end result was fortunately the same. 😂
@nathanbostic7039 5 жыл бұрын
Do you guys sell the adapter that goes to the new headlight by itself?
@MariachiPunoy Жыл бұрын
So nice! Can I find this headlight in Europe/Sweden? And what kind of gold forks is that? I have silver on mine XSR 700 from 2018.
@Alxndr.vincnt 5 жыл бұрын
if I throw an LED headlight on my Bonneville will I have to alter any of the relay's or resistors to adapt to LED? when I changed my turn signals, even though they weren't LED, I had to modify a bunch of wiring so they wouldn't both blink at the same time.
@motodemic 5 жыл бұрын
Alexander V our drop-in options for any generation Bonneville do not require any other alterations or resistors. In your turn signal install you could have simply change the flasher relay to a digital one in order to avoid using resistors. Head to motodemic.com, we’ve got all of this info listed for your model 👍
@markusoksman6503 4 жыл бұрын
Looks great! I have the 2020 XSR900 and I’m going to buy one of these. Does this work with the original headlight side brackets or do you need to order one of those as well? Thanks!
@motodemic 4 жыл бұрын
The Upgrade works with the stock headlight brackets 👍
@Arjun.pc-817 4 жыл бұрын
Super looking
@victormanuelcubero170 Жыл бұрын
De cuantas pulgadas tiene q ser el led para q entre en el de origen
@MrFleix 3 жыл бұрын
Any clue if this would be street legal in Germany? And are all the tools necessary included in the package? looks amazing and I‘d love to have one
@motodemic 3 жыл бұрын
Absolutely legal in Germany. Our LED Upgrades are fully ECE compliant.
@pgoyt 3 жыл бұрын
It's work in Yamaha Enticer Bike?
@private_Angus 2 жыл бұрын
Hi, just an adaptive 2 from you. How can I connect the parking light? Red cable, to make it work?
@motodemic 2 жыл бұрын
Correct, connecting the red wire will illuminate the parking light.
@Cicadawee 3 жыл бұрын
Oh XSR 900.....hmmm 👌
@tommasofumisetto5531 7 ай бұрын
How many inches is the headlight? Thank you
@scottrink5926 5 жыл бұрын
Is it brighter than stock and is the light focused pretty well?
@motodemic 5 жыл бұрын
Scott Rink night and day brightness wise and an awesome beam pattern in both low and high. See the product page for photos - bit.ly/yamupgrd
@McAndwable 2 жыл бұрын
Hi there. I'm trying to replace the retaining ring, i took a fall and it got bended. I took the headlight out, but the nuts screws are stuck, i believe they have some kind of paste to keep them in place. Do you have an advice?
@motodemic 2 жыл бұрын
The factory screws are very difficult to remove from the side mounts (opposite of what we removed in our installation) because Yamaha uses a high-strength thread locker. The only way to "loosen" thread lock is with heat. Heatgun, soldering iron on the head the heat the bolt up may do the trick.
@TheSoulofuniverse 5 жыл бұрын
Do you have an official distributer here in UK? I would like to order one.
@motodemic 5 жыл бұрын
SOU we do not have a stocking dealer in the UK or Europe. We do ship worldwide every day 👍
@vincentcor19 Жыл бұрын
Hello👋🏼 Could you do a montage on honda msx 125 sf one day?
@marcducati 2 жыл бұрын
I have a xjr 1300 2016 and wanted a led headlight but I don’t want to change the housing which is smaller than the 7 inch.
@motodemic 2 жыл бұрын
This upgrade works on the XJR. Follow the link in the description and select the "Yamaha Cruiser" product. That page lists all other fitments.
@rogerburlison5711 4 жыл бұрын
Do you have one that will fit a 1999 Yamaha Roadstar Silverado
@motodemic 4 жыл бұрын
Unfortunately, it will not. Though it does work on the 2002+ Road Star Models so maybe you could do a headlight swap. Feel free to contact us, we may be able to help you sort something out.
@omeraktash Жыл бұрын
Hi, any sale point in Germany or Turkey? ordering this from the USA will cost me a lot :(
@motodemic Жыл бұрын
We have a dealer in Germany, Customlite.
@tristanalmanza5493 4 жыл бұрын
What tires do you use in your xsr 900?
@motodemic 4 жыл бұрын
Pirelli Diablo SuperCorsa
@sureshramanu1854 4 жыл бұрын
Hi bro is it available in Andhra Pradesh India the same lamp kit
@motodemic 4 жыл бұрын
Yes, we ship worldwide!
@fedeferrer9349 4 жыл бұрын
speedometer panel instalation plzzz!!
@motodemic 4 жыл бұрын
?? Not sure what you mean?
@jamesmarkodevilas3346 5 жыл бұрын
Any samples at night?
@motodemic 5 жыл бұрын
Check out the product page linked in the description.
@tandyle8383 Жыл бұрын
This is 5.75 inch headlight the same like the OEM one right?
@motodemic Жыл бұрын
The stock light unit is a non-standard 6-inch. We are adapting a 5.75-inch light unit into the stock location here.
@tandyle8383 Жыл бұрын
@@motodemic Oh, cause Im ordering a 5.75-inch headlight and I wonder if it totally fits the outside frame or not.
@joshuapacible 4 жыл бұрын
do you think it will fit on a duke 390?
@motodemic 4 жыл бұрын
This would not. Though we offer headlight brackets and complete headlights if you wanted to do a swap.
@ross6883 2 жыл бұрын
are you nuts? it doesn't even apply
@gustavovasquez6135 2 жыл бұрын
Would this fit on a vstar 950 ?
@motodemic 2 жыл бұрын
Yes! Follow the link in the description and select "Yamaha Cruiser".
@user-cz6by5hr4o 2 жыл бұрын
❤️❤️❤️🙏
@BluecollarBeck 3 жыл бұрын
Is this headlight the EVO S?
@motodemic 3 жыл бұрын
At 0:30, Evo S on the left, Adaptive on the right 👍
@Romski1978 4 жыл бұрын
Is gonna fit xsr700???
@motodemic 4 жыл бұрын
Yes 👍Follow the link in the description.
@du2lx 3 жыл бұрын
What brand is the LED DROP in unit?
@karlschauff7989 3 жыл бұрын
JW Speaker
@motodemic 3 жыл бұрын
We use JW Speaker LED units and they make our Evo S unit. We make the adapter ring in-house.
@arafathsaleem714 2 жыл бұрын
Whats the headlight size? 5.75 inch or 7 inch?
@motodemic 2 жыл бұрын
The light used in this upgrade is a 5.75 with an adapter to fir the non-standard size Yamaha uses. Our Evo S model has the same output as the 7-inch version.
@alessiofornaroli6529 4 жыл бұрын
How many inches it measure?
@motodemic 4 жыл бұрын
The light is a 5.75-inch with the adapter allowing it to replace the stock 6-inch.
@BluecollarBeck 3 жыл бұрын
Is this a 7inch headlight?
@motodemic 3 жыл бұрын
No, 5 3/4 👍
@MrFleix 4 жыл бұрын
Hey, does this headlight fulfill the European regulations? And does it work for the 2020 model? Really want to get myself one of these
@motodemic 4 жыл бұрын
Yes and yes. Check out all of the details here - bit.ly/yamupgrd
@poulet66430ify Жыл бұрын
Abuser le prix 😂
@nicolamartellacci2356 4 жыл бұрын
why don't you sell even the frame-ring togheter? It would be really faster to install and to come back to the original one if needs it
@motodemic 4 жыл бұрын
Well, considering that is an OEM part that comes at an OEM price and availability. The 5-10 minute install is worth it.
@garystanley8544 5 жыл бұрын
Why is it not necessary to replace adjustment screw?
@motodemic 5 жыл бұрын
Gary Stanley we don’t reuse the side to side adjustment, the vertical adjustment is retained. The side to side is not necessary due the light having an extremely wide pattern and how the light is mounted.
@Joe-jb1jf 2 жыл бұрын
Why do I want to do it? It is brand-new motorcycle that’s what I want that’s what I buy why do I have to remove and replace everything
@kpraz 3 жыл бұрын
a complicated headlight. y have springs in them?🤔
@motodemic 3 жыл бұрын
Totally, made it challenging to develop a simple upgrade. They have 2 springs that are used over the adjustment screws for left to right, and up and down adjustments since the housing is fixed.
@SuperTalBar23 5 жыл бұрын
cant get into the link
@motodemic 5 жыл бұрын
Seems to be working on our end. motodemic.com -> Products -> Manufactuerer -> Yamaha
@SuperTalBar23 5 жыл бұрын
@@motodemic still nothing.. maybe blocked for my country?
@motodemic 5 жыл бұрын
@@SuperTalBar23 not sure man. Site is up and running just fine. Feel free to send us an email to hello@motodemic.com
@adpadp7139 3 жыл бұрын
How much MRP ... Money
@motodemic 3 жыл бұрын
Follow the link in the description 👍
@alexwhite5724 Жыл бұрын
We need to see it in the dark
@motodemic Жыл бұрын
check out the link in the description 👍
@rizaltallulembang8903 5 жыл бұрын
First...🙋
@motodemic 5 жыл бұрын
🍪
@michaelb.42112 11 ай бұрын
Well, I started and the screws in the headlight were SO tight, I just ended stripping them out and installing the old headlight. This SUCKS ASS.
@motodemic 11 ай бұрын
The screws can be a pain, that is why we include a high quality screwdriver. Just to make sure, you are only removing the top and bottom scres as shown at 1:20. The side screws have red threadlocker and are very hard to remove. Since the top and bottom screws are not reused, you can technically drill them out and us the supplied screws with the upgrade.
@michaelb.42112 11 ай бұрын
@@motodemic Oh !!! That's probably it. Threadlocker.
Scary Teacher 3D Gaming
Рет қаралды 56 МЛН
Headlight Revolution
Рет қаралды 5 МЛН
Братья автоподборщики
Рет қаралды 1,1 МЛН
Mick EDITS
Рет қаралды 3,9 МЛН
Макс Ващенко
Рет қаралды 1,3 МЛН