Chrysler/Dodge/Jeep/Ram 3.2L and 3.6L Spark Plug Tube Seals Quick Tip

Рет қаралды 9,956

5 ай бұрын

Please help support this channel by any means such as word of mouth, sharing the links, or by donations. For donations please click on: www.paypal.me/motorcitymechanic
Please use the following link when ever using Amazon.com. Any purchases you make on Amazon will help support this channel.
amzn.to/2mALgqS
Today I will be showing you how to replace the spark plug tube seals on the Chrysler, Dodge, Jeep, and Ram 3.2L and 3.6L Pentastar engines using tools that you already have so that you dont need to buy any special tools or damage the new seal or valve cover.
Everyone loves mail! Feel the need to write a letter or send something cool?
Motorcity Mechanic
P.O. Box 240
Grovetown Ga, 30813
Motorcity Mechanic is your online source of Chrysler, Dodge, Jeep and Ram repair videos. The videos are designed to help everyone from the average DIY, all the way up to the professional level tech. Make sure to subscribe so that you get notified of all the new videos that keep getting added weekly.
Check out and "Like" our Facebook page: / motorcitymechanic
Check out and "Follow" our Twitter page: / motorcitymech
Find me on instagram: / motorcitymechanic
Email me directly at david@motorcitymechanic.com
(465)

Пікірлер: 62

@klwthe3rd 5 ай бұрын

This channel is my GO TO for all things Chrysler/Dodge/Jeep Pentastar. I've learned so much over the years from David as he is one of the most knowledgable in regards to all things Chrysler products.

@EarlSinclair97 5 ай бұрын

The key phrase in this video: Take your time. The P-Star is an engine that requires much patience and long-suffering to achieve effective service results; at least in my case. 😄 As always, thanks for the great advice David!

@trystanmarshall1867 28 күн бұрын

I did this on my 17 charger with the p-star in it I lost my patience with it after I got done I gave up and put it back together but I have to go back in to it anyways cause I don't think I got the cam shaft sensor seal in all the way and I think the spark plug tube seals slide as well

@deathmortiz13 28 күн бұрын

This the best instructional channel. Got my top air intake fixed following these guys instructions. Great work and very detailed and with great tips.

@nimmerb 5 ай бұрын

Thanks for the tip of adding grease to the seal! Seeing you again is better than the Super Bowl this weekend!!!

@MotorCityMechanic 5 ай бұрын

Wow many thanks. With me not being a big football fan I almost forgot about it happening 😂.

@YOUZTUBE2000 5 ай бұрын

Thanks David for continuing to make content on the 3.6 Pentastar engine. I have to do valve train and several other repairs on my 2014 T&C. You have been a HUGE help with these well made videos! Thank you, Tony!

@MotorCityMechanic 5 ай бұрын

Thanks for following the channel and for watching these videos!

@elcheapo5302 5 ай бұрын

Thanks, David. I enjoy your Pentastar videos. I own two of them, and they're getting older (10 and 6 years), even though they've been 100% trouble free. One is lifetime maxcare, so that one's not my problem, but the other isn't. Well done, sir!

@vince7247 5 ай бұрын

Never forget about the seals especially on a promaster. Thanks once again .

@MotorCityMechanic 5 ай бұрын

Very true. Don’t want to have to do it twice

@comacoda 5 ай бұрын

Great video, love the pentastar videos. 👍

@MotorCityMechanic 5 ай бұрын

Glad you like them! Thanks for watching

@keithbednar6814 5 ай бұрын

Thanks David. Your videos are so helpful. I appreciate the time you take to do them.

@robertgreen4050 5 ай бұрын

Great tip about lightly lubing your new parts as a diyer myself I always do this especially with new seals

@MotorCityMechanic 5 ай бұрын

It certainly helps when reinstalling the valve cover.

@blazeandcyrus 5 ай бұрын

I changed that spark plugs, coils and coil boots last night. My coil boots were nice n dry so I didn't have to change the seals. I never knew the oil filler neck came off like that.

@MotorCityMechanic 5 ай бұрын

I never have to take the filler tube off but if you ever have to you can as you saw. Now you shouldn’t have to do much for another 100,000 miles…..fingers crossed

@thearrow5793 5 ай бұрын

Thank you David a lot of information on this video….thanks again 👏👏👏👏👏👏👍👍👍👍👍another big thumbs….

@MotorCityMechanic 5 ай бұрын

Appreciate the support!

@DasYorgo4000 5 ай бұрын

Luv my 3.6 zero oil leaks even the oil cooler is original on a 2013 GC. Even my previous ride 3.2 LH motor zero leaks kudos to mopar for no oil on my driveway.

@MotorCityMechanic 5 ай бұрын

One day it will leak…..just mainly from one place but you might beat the odds…..fingers crossed

@DasYorgo4000 5 ай бұрын

Dorman has me covered when it finally lets go, it only lasted this long because it never sees the inside of a quick lube place and the spline gun stays put in the garage…

@randallcheek9308 5 ай бұрын

Another great video and info

@MotorCityMechanic 5 ай бұрын

Next week I repaint a used car in a dealership parking lot….make sure to watch 😂

@thegeekdreams 5 ай бұрын

Awesome Dave. As always you rock.

@xyzzy1234567 5 ай бұрын

always very informative

@MotorCityMechanic 5 ай бұрын

Many thanks

@TXCherokee 5 ай бұрын

Another good tip. Thank you David

@sstocker31 5 ай бұрын

Half way through the video I found myself wondering about those seals and if they come in a separate kit....you being so complete with your vids include the info at the end....thanks for that!

@WBOS72 5 ай бұрын

Excellent video, thank you.

@davidrobins4025 5 ай бұрын

Thanks again for another very clear description and video

@MotorCityMechanic 5 ай бұрын

Your very much welcome

@jameswyatt460 5 ай бұрын

It's like you know what I'm working on. Your last couple of videos were perfect timing. You saved me some 💰. I was going to replace all my coils, but it looks like I'm just replacing the boot of one. I'll also be replacing the pcv valve and valve cover seals.Thank you for the videos.

@davidsawyer1599 5 ай бұрын

Thank you.

@MotorCityMechanic 5 ай бұрын

Your welcome!

@jeromebland8287 5 ай бұрын

Great tip !

@MotorCityMechanic 5 ай бұрын

Thanks for the watching latest video

@briancraig81 5 ай бұрын

Thank you David!

@MotorCityMechanic 5 ай бұрын

You’re welcome!

@sheerwillsurvival2064 5 ай бұрын

Another great video

@MotorCityMechanic 5 ай бұрын

Many thanks

@paintnamer6403 5 ай бұрын

The older slant six had rubber oil seals on the spark plug tubes, as well as hemi engines.

@chadhubener 5 ай бұрын

2015 jeep grand cherokee with an oil leak on the passenger side front most spark plug. Most likely this seal? Thanks again with the help on the oil in coolant issue i had and your recommendation to go after the oil cooler assembly first. I replaced it this weekend and flushed the system and am confident that was the issue.

@scottp2462 5 ай бұрын

David can you please do a video on the 3.6 knock sensors? When that oil cooler/filter housing goes the knock sensors are in a coolant oil bath and the connections get fouled. There appears to be a pigtail harness that is replaceable along with the sensors. I’ve read the sensors are very sensitive to proper torque.

@MotorCityMechanic 5 ай бұрын

Of all the 3.6L engine I have ever worked on (hundreds)….i have never had to replace a knock sensor.

@scottp2462 5 ай бұрын

@@MotorCityMechanic Oh thank you! Great to know. Was worried about having to replace them after seeing them sitting in coolant.

@arturolopez8005 5 ай бұрын

Good video I like it like always is good to have someone who takes his time to explain it in the best way possible thanks a lot Would you make a video about the TPMS module location and replacement for a 2013 Chrysler Town and Country, since I can’t find it in my, I also went to a junkyard, looked for its location on years 11-13 and didn’t find any. Would you help me or if possible reply to this comment, thank you again and have a good one

@blazeandcyrus 5 ай бұрын

What is the best way to replace the serpentine belt tensioner / pulley. I don't have a lift and mine is getting a bit noisy on my 2015 200c 3.6

@papabits5721 5 ай бұрын

I changed just one seal as it was leaking into the spark tube, 37 $ for one from the dealer. In Canada 🇨🇦

@timothyball3144 5 ай бұрын

So qhere did rhat engine come from? Was it a core? It sure has been beneficial to your channel.

@MotorCityMechanic 5 ай бұрын

Bought it “complete” with converters and even the 62RE transmission. Think I paid less then $1000 and have made a ton of videos on both the engine and trans. Was well worth it.

@timothyball3144 5 ай бұрын

@@MotorCityMechanic 👍great ROI!

@YOUZTUBE2000 5 ай бұрын

@@MotorCityMechanicTy for buying that engine and trans David! My 2014 T&C has 80,000 miles and these videos, tips and clues are priceless! Ty, Tony!

@Jon-O. 5 ай бұрын

To be honest im surprised those tubes arent already molded in with the valve cover when its produced with a oring seal at the sparkplug hole land.

@user-pk7fz8nc3k 2 ай бұрын

On my 2011 jeep grand cherokee lardeo. 3.6. As I am removing the valve cover, it hits the transmission dipstick. Preventing me from removing the cover. I'm stumped. What tips do you recommend?

@trystanmarshall1867 28 күн бұрын

I did this on my 17 charger with the 3.6 in it I think ones of the spark plug tude seals slide because its leaking oil again. I also dont think I got the cam shaft sensor seal in all the way as well

@jws3925 5 ай бұрын

What is your honest assessment of these v6 motors? I have heard a lot of disparaging comments about them.

@davidoconnor4378 5 ай бұрын

How about problems with carbon build-up in #2 cylinder of a 3.6 VVT engine in 2014 Chrysler Town and Country causing misfires, do you have any info or insight on that issue?

@MotorCityMechanic 5 ай бұрын

Never seen any carbon issues what so ever. The older heads had issues with burnt valve seats on the left head that were fixed over the years z