Motorcycle Man Cave / Garage Bar Makeover ... a gift to my Dad

Рет қаралды 255,896

Күн бұрын

We recently surprised my dad with a full garage renovation! He’s a huge Harley Davidson fan and loves spending time by his motorcycles with friends, so we completely transformed the garage into an air conditioned man cave.
Here’s what it took to create this Harley Davidson themed garage:
We brought the Harley Davidson vibes by using their traditional color palette and alluding to their logo with a hand-painted symbol on the wall. The brand new garage floor coating (rogueengineer.com/diy-garage-...) also helped tie everything together with the same colors.
We built the dry bar ourselves. It’s very functional and we think it looks great! You can follow our plans to build your own here: rogueengineer.com/diy-dry-bar... The TV, neon signs, and full stock of spirits were the perfect finishing touches!
With year round heat and humidity, a Florida garage is not typically the best location for summer hang outs - so we completed the project with a multi zone mini split air conditioner from Cooper&Hunter. These units are affordable and easy to install, as they didn’t require any duct work. They’re also energy efficient and can be customized to fit pretty much any project. amzn.to/3k2RHAD
For more details on this garage transformation, check out our written article here: rogueengineer.com/motorcycle-...
-------------------------------------------------
BE SOCIAL
/ rogueengineer
/ rogue_engineer
/ rogue_engineer

Пікірлер: 118

@rogueengineer 3 жыл бұрын

Written Article: rogueengineer.com/motorcycle-man-cave-garage-bar-makeover/ Cooper & Hunter Mini Split: amzn.to/3k2RHAD Garage Floor Coating: rogueengineer.com/diy-garage-floor-coating/ Dry Bar Plans: rogueengineer.com/diy-dry-bar-plans/

@rungecreative3084 3 жыл бұрын

Way to go Jamie she was defiantly the mvp of this project

@rogueengineer 3 жыл бұрын

For sure! She usually is

@quanghuypham3406 Жыл бұрын

This is a valuable addition to my woodwork collection kzfaq.infoUgkxkNYRBJuiJ6EwD-tQSAlxg0eFKsnR2cgz I still will rate this woodwork plan as the best in my reference library. It always seems to stand out from the rest whenever you go through the library. This is a masterpiece.

@akkiboy99 Жыл бұрын

How can you show all the beautiful work done and not show your dad's first reaction when He saw this!!! What a good son/daughter-in-law you folks are. Great work!

@nicholaswise2630 Жыл бұрын

Did you not watch the whole video? It's literally right there at the end...

@akkiboy99 Жыл бұрын

Oh my bad! You are right, I stopped where he mentioned I know my dad is going to love this. I thought that was the end.

@Danman1972 3 жыл бұрын

for painting the block. put the tape on the grey color to edge the orange. Run a bead of clear caulk at the edge of the tape where the colors meet and smooth it with putty knife. Then paint and pull the tape while the paint and caulk are wet. You get a perfect edge on a bumpy surface. Work great on walls with texture like they do around here. Makes nice clean lines

@geneswiech4381 3 жыл бұрын

Jamie and you make a great team... nice thing to do for your dad.

@garrettsmith85 2 жыл бұрын

I spy an OCMD Fish Tails shirt!!

@boogie3377 3 жыл бұрын

Excellent work! And a high five for Jamie's skills and work ethic!

@ArmandoPerezContractor 3 жыл бұрын

Always a pleasure to see people so talented in this fascinated world of renovation. Thank you for the ideas .I keep in touch

@leroymoore76 3 жыл бұрын

Enjoy video and dad has a great son

@2wheelzarebetter 3 жыл бұрын

What a lovely thing to do for your dad.

@Barnacle392 3 жыл бұрын

How cool is that garage! You dad is very lucky. I love using Ryobi tools too.

@DeirdreNL 3 жыл бұрын

this is awesome! great job, love the bar and shelving! defiantly going to use that for my garage in the future!

@3326jd 3 жыл бұрын

Great Job.

@rogueengineer 3 жыл бұрын

Thank you!

@floridaliferich 3 жыл бұрын

That came out great.

@QuadeQuick 3 жыл бұрын

Great job!

@mferrarorace 2 жыл бұрын

Nice job! Jamie you are amazing. Do you have a sister? Great job you guys what a gift for your dad! Awesome!

@therealtormechanic 3 жыл бұрын

That's awesome I would love that have millions of tools and three bikes myself that came out amazing!!!!!!

@theflyingspaghettimonster3252 3 жыл бұрын

I wish you'd shown more of the bikes, they looked great from what little I saw of them.

@rogueengineer 3 жыл бұрын

Yea I probably should have. They are pretty sweet

@cbeserra 3 жыл бұрын

Super cool!

@justaddmudd2852 3 жыл бұрын

that came out super nice!

@RSST662 3 жыл бұрын

Great video . Thanks .

@Zmaslanik 3 жыл бұрын

Great Job! And Go Steelers!

@engqi9463 2 жыл бұрын

What a brilliant set up especially the bar

@reiver6589 3 жыл бұрын

Great job.

@rogueengineer 3 жыл бұрын

Thank you

@robertocantero5538 2 жыл бұрын

Very nice job, congratulations!!!

@sonata2477 2 жыл бұрын

Amazing family job ...

@dillondrinkwater6465 2 жыл бұрын

Super awesome to be able to see how y’all made some of the things you made in our fan cave! Was a pleasure having y’all down and thanks again for the amazing work you both did!

@rogueengineer 2 жыл бұрын

Thanks Dillon! Can’t wait to release the fan cave video. Keep an eye out for it coming soon!

@rogueengineer 2 жыл бұрын

kzfaq.info/get/bejne/ha94eJle15_edZs.html

@DoNtCaReBrO_305 2 жыл бұрын

Killer video

@-Ricardo 3 жыл бұрын

Off topic but I LOVE Jamie's nails

@MyGoat65 3 жыл бұрын

Paint the electrical pipe on the orange stripe orange.👍🏻

@bernardcassidy5287 3 жыл бұрын

Class job

@AprilNicoleMusic 3 жыл бұрын

Great makeover project! Love the way the bar turned out with those neon lights :)

@rogueengineer 3 жыл бұрын

Thanks April!

@shaquillefarrington1310 3 жыл бұрын

@@rogueengineer where did you got the pipes from by the bar ? Can u drop the link

@topper009 3 жыл бұрын

That's basically the Downton Abbey of Florida

@rogueengineer 3 жыл бұрын

Hahah so true!

@Peter-gh5tz 2 жыл бұрын

Beautiful job and beautiful to see it given to your dad, he must be so proud You guys in the USA have huge garages, I’m jealous Cheers from Australia 🇦🇺

@rogueengineer 2 жыл бұрын

Thank you!

@adamw225 Жыл бұрын

I see you’re a hawks fan Peter you’re obviously a man of good taste ha

@21Rodge 3 жыл бұрын

Nice job

@jbawdon3111 3 жыл бұрын

Nice outcome. I learned some new words though -- degreeze? degreezer? degreezing? I'm going to have to get my dictionary and check these out!!

@jpisty 3 жыл бұрын

Nice. I think I’ll copy your backbar plan

@philh1245 3 жыл бұрын

I have a 95” TV in my garage and I sit in my garage and watch youtube on 1/3 of my iPhone screen.

@cm1133 2 жыл бұрын

lol

@TheWhataman00 3 жыл бұрын

Jamie...Artist

@scheraqhassim3150 3 жыл бұрын

The old garage wasn't bad to begin with but damn great job on the Re-Up

@cm1133 2 жыл бұрын

@1:42, there is actually a little known hack to obtaining wall paper like, crisp paint edges, with no bleeding of paint under the tape lines, when painting stripes. What you should have done is laid out both rows of painters tape. Then, you should have painted black paint below the bottom edge AND above the top edge of the lower painter’s tape. Then, you should have painted grey paint below the bottom edge AND above the top edge of the upper painters tape. In other words, let’s say your orange stripe was 8” high, where the orange stripe would end up being, you would first have 4” of black paint above the bottom row or painters tape and 4” of grey paint below the bottom edge of the top row of painter’s tape. By doing this step first, before you paint the orange stripe, you are essentially sealing the edges of the painters tape to prevent orange paint from bleeding under the edges of the painters tape. I hope this makes sense.

@justdiyit9683 Жыл бұрын

That degreazzzzing process was satisfying lol

@EmJayCD 3 жыл бұрын

Great job... looks awesome. But what I want to know about is that car seats bench you got back there. Any video footage of it or plans?

@bluexhxr6926 2 жыл бұрын

Looks like a clubhouse

@RYANMAKO 3 жыл бұрын

Looks incredible, and inspiring to attempt! Thanks

@DanMcB1 2 жыл бұрын

De-greasing. GreaSe.

@Peter-xx4be 3 жыл бұрын

Looks amazing! How comfy are those chairs and where did you get them? I have bar chairs but aren't the best, been on the lookout.

@abrahamjordan6714 2 жыл бұрын

Great job! Whats the size of that room?

@hoenircanute 3 жыл бұрын

Hmm, ive been searching for that Rocksolid product here in Norway but cant find it. Not even any hits on it on Germanys Amazon page where i buy my amazon stuff. :( We all mostly use epoxy here.

@ericwoodard8332 3 жыл бұрын

Do you have any trouble using the attic step with the placement of the bar.

@sr7138 3 жыл бұрын

If youre in Orange County, CA I can finish the Harley Logo.

@shaquillefarrington1310 3 жыл бұрын

Where did you got the pipes from for the shelves?? Can you drop the link

@brentville9414 3 жыл бұрын

Looks great! what did you use to hold the wood shelves to the galv plumbing pipes from underneath @ 13:32? Looks like the electrical tie ins... hard to tell.

@rogueengineer 3 жыл бұрын

Thanks! Those are two hole clamps for EMT conduit

@juancarlos-np2hq 3 жыл бұрын

Nooo. Que. Sueño. Me. Puse. A. Imaginarme. Que fuera. Mío. Felicitacionea

@Kenn1969 3 жыл бұрын

More of Jamie!!!!😏👍

@aeromedical6750 2 жыл бұрын

LOL. His assistant is definitely on point.

@shaquillefarrington1310 3 жыл бұрын

Hello where did you get the pipes from for the shelves can u help?

@Hhhhhgggihgdd 2 жыл бұрын

Awesome garage , how many bikes do you own ?

@468002 3 жыл бұрын

Did you only need to use 1 rocksolid 2.5 kit to do the floor? I keep seeing others recommending to use twice as much

@rogueengineer 3 жыл бұрын

I used two kits.

@DavidAbraham87 3 жыл бұрын

What size is your garage area?

@ebar2010 2 жыл бұрын

What brand and color paint did you use? Or did you have them custom matched?

@markclark8196 2 жыл бұрын

How did you make the wall shelves

@shaquillefarrington1310 3 жыл бұрын

I’m still looking for the pipes for the shelves help please???

@Sway575 2 жыл бұрын

What did u use to mount 2x4 to block ?

@baileybuster2119 3 жыл бұрын

Could you have done the installation yourself if it wasn't for the warranty?

@johnjg88 2 жыл бұрын

How is this floor holding up today?

@prodriguez3290 Жыл бұрын

how much did cooper and hunter charge total for that install?

@johnweaver6553 3 жыл бұрын

How many square feet floor is it

@rsox38 3 жыл бұрын

Go Hokies? Or does your dad just have great taste in hats?

@chase0803 3 жыл бұрын

Why did they use a multiple zone condenser and only install one head?

@rogueengineer 3 жыл бұрын

We installed two heads

@isabelramos7372 2 жыл бұрын

Where did you get those stools?

@richarddreiling3262 3 жыл бұрын

how does the mini split drain hose work?

@rogueengineer 3 жыл бұрын

It has a small pump to draw it up to the drain.

@richarddreiling3262 3 жыл бұрын

@@rogueengineer thanks

@RomanEmpire16 3 жыл бұрын

How much did all this cost ?

@ilovepizza8263 Жыл бұрын

BAD....ASSSSS!

@bobdecker2446 3 жыл бұрын

Great job! But the real hero of this project is not the A/C, it's Jamie!

@baileybuster2119 3 жыл бұрын

That was exactly what I was thinking when I saw the video!!!

@cm1133 2 жыл бұрын

I concur!

@iverson2k10 3 жыл бұрын

I liked the setup until I notice the Steelers logo.... jk good job

@brandonousley3798 3 жыл бұрын

Same

@Raysgarage90 2 жыл бұрын

Where’s our invite ?

@allisonsmith8749 Жыл бұрын

Square feet?

@thethrottletherapist 3 жыл бұрын

oh man, definitely garage goals.

@ConcreteFloorSolutions 3 жыл бұрын

No disrespect, you followed directions. Once again, the epoxy coating manufacturer did not recommend the proper preparation. If you apply a coating on top of a coating that is peeling, now you will have two coatings that peel. If you didn’t diamond grind the floor to clean, white, scratched concrete, it WILL FAIL. When it does, look us up for high quality epoxy that WON”T peel when installed properly. Give us an update on the floor in 6 months.