@Hillbilly1959 4 ай бұрын
You sir are a BIG help as well as entertaining. Well done
@MowerMike 4 ай бұрын
Well dang I sure appreciate the kind words. Glad I can help
@beegekhaos3171 4 ай бұрын
Awesome guide - thank you so much!
@MowerMike 4 ай бұрын
Glad it helped.
@davideslava4357 Ай бұрын
Muy bien explicado el procedimiento. Muchas gracias, pronto lo pondré en practica!.😊
@MowerMike Ай бұрын
De Nada Amigo!
@breannaoliver6316 3 ай бұрын
Mower Mike. Me gusta la explicacion paso a paso de este video. Gracias por Todo tu explanacion
@MowerMike 3 ай бұрын
De nada!
@mikeward2922 11 күн бұрын
I have a compression test on this motor revealing 115 PSI. I'm on the fence on doing the rings. Thoughts? The motor smokes on startup and then fades. A trusted mechanic indicated a possible blown head gasket, and I do have a new carb. I do get 'surge'.
@MowerMike 9 күн бұрын
115 is plenty of PSI. I wouldn’t suspect the rings. If it is surging and black smoke I would just swap the carb with a cheapo Amazon carb.
@mikeward2922 2 күн бұрын
@@MowerMike That's basically what I did. I got online with a tech and we're going to swap that new carb for something a bit more reputabe. We suspect a head gasket is needed too. Thanks for the reply
@MowerMike Күн бұрын
@@mikeward2922 Good deal. I have lots of videos on that engine to help ya out.
@splash5974 4 ай бұрын
Awesome vid! On another note... What style motors are these known as? I have lost the black plastic air filter cover. I want to locate one. Thank you!
@MowerMike 4 ай бұрын
31P677 is the model number. Pull it up on a parts site like this. www.jackssmallengines.com/jacks-parts-lookup/manufacturer/briggs-stratton/briggs-stratton-engine/200000-399999-series/31p600-to-31p699/31p677-0144-b1
@splash5974 4 ай бұрын
@@MowerMike Thank you kindly for the reply!
@b2addict561 2 ай бұрын
Loving your vids brother, thought I was subscribed but I am now. This is only my 2nd small engine head gasket replacement and first Briggs. The Kohler I did came with new head bolts but the Briggs kit does not. It appears you're reusing the original head bolts, I'm assuming that's okay to do on these? Please excuse my ignorance and thank you for your knowledge !!
@MowerMike 2 ай бұрын
I always have reused head bolts on these motors without any issues.
Chickanic
Рет қаралды 250 М.
Raley's Small Engines
Рет қаралды 31 М.
OldSoulMillennial
Рет қаралды 2,1 М.
Henners Schmiede
Рет қаралды 33 М.
Raley's Small Engines
Рет қаралды 121 М.
Tom Doby Mower Repair
Рет қаралды 1,2 М.
Jeff's Little Engine Service
Рет қаралды 251 М.
Individualized Repair Inc
Рет қаралды 31 М.