MPCNC Primo Update!

Рет қаралды 33,259

Күн бұрын

Website: www.projectsbybrian.tech/
Hey everyone, I just finished the Primo build and wanted to make a video sharing my thoughts on it. I will be making videos as I start using the machine and as I make tweaks and upgrades to it. If you have any questions, feel free to leave a comment. I'm pretty active here on youtube.
In the video I said this was the only version of the Primo out right now, however Ryan has released at least one other size as of 8/28/20.
Here is the Bluing that we used on the steel tubes:
www.amazon.com/Birchwood-Case...
Thanks!

Пікірлер: 33

@allted 4 жыл бұрын

Cool video, lets people get a good look at the new Primo version! I always plan on making a fancy video but there are just so many other things I should be doing instead of stumbling around a video editor. Thanks again, glad you like it so far.

@Tobias94b 4 жыл бұрын

Thank you for making this video! I was planning to build a MPCNC for half a year now, and right now where I started on planing the build, the Primo was released in between but mostly all the videos available right now are the burly or earlier versions 😄 So thanks again, appreciate it

@TheWayneStevenson 4 жыл бұрын

That's awesome!!! Thanks for sharing. Sitting on my Burly prints for months, and now that all my equipment is finally in (GT2 I ordered I think back in February, arrived a couple days ago)I'm ready for assembly. But wanting this now too. Lol. I was going to wait for the EMT conduit files, but I'm going to try get some steel tubing on Monday. And go from there.

@MP-mu1kw 4 жыл бұрын

Excellent video! The new build does look more refined and sturdy. Thanks for the share, looking forward to seeing it in action. I am particularly interested in cutting Acrylic, because I have been struggling with melting and tried so many different settings but no success.

@eideticex 3 жыл бұрын

Pro-tip with iron and steel tooling. Keep a small bottle of machine oil and a fluffy lint-free rag nearby, use that to wipe the steel down regularly (daily, weekly, monthly up to you). It'll stay clean, lubricated and wont rust.

@mageac 3 жыл бұрын

the black coating is commonly called bluing, its used on a lot of guns, hot blue lasts longer but for some things a cold version works good enough

@planckstudios 4 жыл бұрын

Thx for the vid. Looking forward to see how it cuts. If you work the spillboard over with a 3/4" hog bit, just a couple mm deep, you'll eliminate small inconsistencies from mounting it less than level. Why not just have the machine drill all the holes for your mounting system? Incidentally, rather than a mounting system, I've just drilled then screwed work into the spillboard - great results, less thought. And less collisions between bit and metal parts in the bit's path

@nemohoess 4 жыл бұрын

an awesome video where did you get the files from ?? I would like to upgrade mine to the primo

@beaugalbraith3242 3 жыл бұрын

Did you ever ground the machine? I would worry about the movement wearing down the cable sheathing, specifically at the entrance and exit points of the tubing. Maybe print an end cap so it's wire on plastic and won't catch any metal burrs.

@djVania08 2 жыл бұрын

How much time to put this together? +-? And how much does this cost,. including the filament? Is PLA enough? Really cool looking machine, I like to colors!

@BloomingtonFPV 4 жыл бұрын

What are the dimensions of the 1" steel tubes? I.e. how thick are the walls?

@navyjetfixer1562 4 жыл бұрын

The pipe is 14 gauge steel tubing. Is the tube diameter measured on the OD?

@GregN456 3 жыл бұрын

I'm considering building this machine but I'm unsure if each of the parts will fit in my printers build volume 180X180X180, is it possible or would I need to buy a printer with a larger build area?

@mikeflorence2336 5 ай бұрын

What was the wall thickness you used for the steel tubing?

@johnk2113 3 жыл бұрын

Hi, can you make video about octoprint (hardware and software)?

@IsmaelPR32 2 жыл бұрын

What steel tubing did you use exactly? Thanks!

@Vitaliy_Bes 3 жыл бұрын

Отличный станок! Я тоже делал схожий проект на мебельных трубах, если интересно видео есть на моем канале.

@JK-vf3uk 3 жыл бұрын

Is this DOM steel tubing? Did you source it online or locally?

@JK-vf3uk 3 жыл бұрын

Projects by Brian Ok thanks!

@amparopachon4209 2 жыл бұрын

Alguien me puede ayudar , nosotros elaboramos la maquina , pero esta fallando , cuando corta , se desfasa y pierde su ruta , a que se debe ?

@scotty562 2 жыл бұрын

What controller / firmware version are you using? How did you incorporate the limit switches? Are you happy with how they work?

@ProjectsbyBrian 2 жыл бұрын

I was using the Full Size Rambo, and I'm pretty sure it was running Marlin. I was very happy with the limit switches and would recommend them to anyone starting a build.

@brianp1030 3 жыл бұрын

Do you think I can get away with using a 1mm nozzle?

@edwardtse8631 2 жыл бұрын

Can this work if this is mounted vertically?

@fabriziog3983 2 жыл бұрын

whats the exact tubing you used ?

@andrewc3609 3 жыл бұрын

what filament did you used on your build?

@andrewc3609 3 жыл бұрын

@@ProjectsbyBrian Is it PLA or PETG? or something? thanks

@zchan1120 3 жыл бұрын

What are the specs on the steel tubes you got?

@zchan1120 3 жыл бұрын

@@ProjectsbyBrian Did you get stainless or not? I'm assuming from the video it's not stainless. And do you know what I can google to find relevant shops? I am in Southeastern pa and so far all I have found is getting tubes shipped from metalsdepot which is ~$80 for a 3x3ft build....