Great video, well edited, no talking trash, good camera angles and the wording was clear and concise. Top quality right there. I'll subscribe if all your videos are this good. I already did. Thank you, nice saw pants too. Jim Tree

Fairest test I have ever seen. You are consistent. Well done.

Nice to see someone warm their tools up first for once

Well deserved likes and views on this one. While other reviews rave about how great the 500i is due to being newest, FI, etc. we have a real test here. Not one word spoken or unnecessary fluff, just straight up test and results. It really does help some of us answer the question, "what is [best] for me?"

Nice review! I like how you look after your equipment by warming it up properly. Too many pl just come start and rev the crap out of them. Uber you get many years of reliable service from your gear.

Klasse Video und ein toller Vergleich zwischen den Sägen. Ich überlege mir gerade eine Säge in der Klasse zu kaufen. Grüße aus dem Ruhrgebiet Niko

572 19sec $900 70c ,500i 80cc 18sec $1500,462 77cc 17.9 sec $1100

Stihl ms462 impressive saw,husky 390 ported is a huge favourite of mine ,also had my ms 460 ported and did that saw do some work.still in my shed ,sold all the other saws.when I was younger hang of a husky 3120 for years ,unbelievable.good review.

He’s back! Awesome shoot out aaaand 462 for da win, of course!! 💪🏻

I have the 462 and in my opinion it's the best saw on the planet.

I just bought 2-462's and they are screamers with super low weight. Until they get the weight down on the 500I the 462's will get the nod. A 1/2 lb. heavier for the 500I but try lugging that extra 1/2 lb. around all day bucking limbing logs through the brush. It does make a difference.

I was running this saw for about 2 hours at about a 30-50% duty cycle kzfaq.infoUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.

Very much appreciated, thank you. The best simple comparison I've seen, bravo! Just one small point, to eliminate doubt set camera to avoid loss of sight of the chain and bar for some changes. sincerely david

I bought the ms 462 cm, it is an absolute beast. I work with it often and nearly every day definitely a keeper

That 390 was on a mission! Nice!

Excelent video! Would be nice now to put same amount of fuel in each one and count the cuts :) But im waiting for husqvarna with injection

What’s a freakin saw collection you got all the best saws

Nice job showing us. I'm hoping some hotshot crew starts using the 500i when they become available in the States so we can get an idea of durability.

Very good comparison.

Awesome video!!!!! I would love to see these times with muffler mods also

That 461 stihl and big 390 husq cleared the area!!!!

The last Husky is a freakin beast !!!!!

That smaller Husqvarna 572 impressed me.. Strong contender when ported 👍

Danke für das Video überlege zwischen 7900 und 462. Konnte dem günstigen Kurs bisher standhalten und werde wohl bei stihl bleiben 👍

That was are great comparison video TY!!!!!!!!!!!

The 390 husq really cleared the area.

Einfach tolle Sägen... Jedes mal, wenn ich das Video wieder anschaue beneide ich dich um jede Einzelne! :-)

Great comparison. Would have loved to see 3 cuts and a new chain or sharpen each time. Otherwise great job. Thank you!! In the end they are all great saws! The 462 surprised me over 500. Knew they were close, but expected 500 to barely win. Still debating on either a 462 or 572 for my next saw.

Awesome great video chain made my day.

Good that the same bar and chain was used on each saw used!

461 My favourite saw on the planet. Great to see a ported version destroy the 500i. The 462 and that last Husky. I was speechless 🤔

Weight is king when working, given reliability is there. Who cares about tenth's of a second. Stay safe out there

Sir that 390 is a beast

Ms 460 king my favorite

Great video I'd love to see a 395xp video.

Loved this video, was leaning towards a MS462 C-M anyway because I still love to be able to maintenance the saw and I feel the electronically controlled carbs are proven by now on Stihl. The new fuel injection sounds amazing but I just don’t feel like being that close to the bleeding edge of technology before it’s had a few years of manufacturing to prove they didn’t have design problems.

Rather than show the ported saw's I would have like to have seen the stock saw have three cuts in succesion and see an average. We are human and I doubt we run the saw the same every time, we are talking 1.2 seconds difference between the three fastest which is pretty hard to see in real life. Very good vid. Apparently the 390 is a salty dog, I wonder how my 394 would stack up with the same length bar and step up the sprocket a notch?

Nice Job 👍🏻

Good afternoon, or maybe evening. In your opinion, which model of chainsaws is the best and most reliable between two brands Stihl - Husqvarna. Thank you.

Nice work .

all good saws :)

Super tare clipu....imi place ...

great video 10/10. Who did the port job on the 461 and the 390 ? thanks

Do you guys switch bars and chains like this or ea saw have its own???

Great video.

Cool video!

Great vid thanks😀😀

Cool video. I still vote the 500i because it has more torque and can handle a 32” bar like the 462 with a 28” bar

462 is the best saw in the known universe, peroid. Nuff said

Stihl ms 462 cm is really good chainsaw

Nice Steph. That 390 is a weapon!

What do you think? The 500i i thought should be quicker than the 462, makes me wonder why I would bother upgrading? Maybe after 10 tanks of fuel it will losen up a bit?

Man that thing is a beast. My 461 can't keep up !!!

ported Dolmars are no joke when you let them breathe, may be the fastest saw in your comparison. nice work on the vid

Would you recommend the tsumura bar? I’ve been looking at buying that exact bar for my 362.

Парень молодец , все четко и понятно без лишних слов , лайк.

Awesome comparison. How long will the ported saws last for an every day logger? Great to see them all running and what times they all did.

Hallo, ich hatte dir Mal bei Facebook geschrieben (sonstige). Wie hoch ist der Aufwand die 462 zu Porten, auch preislich. Und was für Leistungssteigerungen erreicht man, wenn man berücksichtigt, dass die Säge weiterhin täglich laufen soll.

How much time is on each saw? The 7910 time is totally out to lunch they are not that slow carb adjusted what air filter is on it? never have seen a 7910 get beat so badly like that before. How about 3 cuts each? If the 462 beats the 500i what is the point? Thank you for that, can you revisit this competition?

I run a ported 460 for felling and a stock 460 for bucking the hot saw is a beast I bet it would put up a 14 sec number

The best Stihl! 💪 👌👌 😘

✝️🇺🇸👍 thanks for the video god bless and stay safe

Saw are good it depends on the sharpest chain

What is the weight difference between 572xp and 390xp? must be small?

Where'd you get those saw dogs on the 461? Great video.

Nice‼

462cm stihl is a masterpiece to me and I dont own 1 stihl.

Ever notice nobody ever puts a Poulan Wild Thing in these competitions? Just think about that for a minute🤔 There’s only one true king💪🏼

The 461s are a hard saw to beat

Those last 2 started to remind me of that zombie series 28 days later

I thought that ported 461 was fast but Holy Cow... That ported 390 came in at 13.4. That's Ripping!

I log everyday with these Saws all Stock Stihl is my Favorite but I sure wish they had the Husqvarna Gas& oil caps

I have the 661, but I've been looking at getting myself a 500i or 462. I might get both...

where is the dolmar saw from

Great video but I don't think it will ever make it as a logging saw due to how complicated it would be to have to rebuild. I've not tried any of the new stihls but I know my 460 mag will never get replaced.

I have a 500i. Absolute beast.

Q marca de espadin es?

Nice :)

The 462’s are game changer for stihl never mind the 500i that sounds like an oleomac.

Gotta love the EPA..

👍 çok başarılı teşekkürler

The old 390 compare to the new oncec is a difference i can see but for just a hobby and wood for own use 60 cc is enought for me i think but have some of u here exsperiance with husky 359? And an awsome video greate work

Greetings from Dolmartown- Hamburg/Germany

Is a echo 680 in this class?

The nicest thing about the 462 its like holding air how long it will last is another question .

What were the stats on that stihl That won? Didnt think you had the rpms up on the dolmar! I'm a husky guy but I'm pretty sure that dolmar shoulda walked all over them

140psi Good compresion 372xp oem?

nicely done!

The 462 🔥

140 psi is good compression for 372xp 2003?

A question. When did a Stihl bar start fitting a husky?

It dont realy matter. We all just enjoy cutting wood. Old homelite 410 still running. 660 backup. Or 395 husky.

500i great saw, but what you think about durability?

Sieht sehr schön aus. Aber bitte mal die maximal Schnittleistung pro Minute (Maximale Drehzahl Pro Minute) ist gleich der Schnittleistung in Meter Pro Minute. Die hier Vorgestellten Motorsägen haben unterschiedliche Maximale Schittleistungen pro Minute von ca. 980 m bis 1180 m Pro Minute. Das wieder um schlägt auf den Kraftstoffverbrauch den die Motorsägen mit Hoher Drehzahl verbrauchen mehr bei Volllast. Wieviel Schnitt erreicht die Sägen bei Gleichen eingesetzten Menge von Kraftstoff.

Is that a 24 or 28inch bar buddy?

What makes a saw cut to one side or the other? Any ideas? Thank you

Super Video! Das Ergebnis ist für mich überraschend - ich hätte die 500i auf Platz 1 gesehen. Umso mehr erfreut bin ich, dass ich die 462 gekauft habe :) Eine Sache hätte zu einem noch besseren Resultat und noch aussagekräftigerem Test beigetragen - 3 Schnitte pro Säge und dann einen Durchschnitt errechnen. Nichts desto Trotz ein gutes Video und an dieser Stelle herzlichen Dank dafür. Viele Grüße aus Bosnien und Herzegowina

Nice👍

That stock dolmar 7910 seemed slow, yet that 462 was faster🤔? Kinda strange, How much run time is on them?

My old pioneer partner 5000 plus can still do this!