MSFS 2020*Improve Performance & Fps, Decrease Stutters & Ghosting-DLSS & TAA!* Easy to Follow👈🛫
Рет қаралды 15,035
Күн бұрынMastering NVIDIA Profile Inspector: Unlocking Your Graphics Card's Potential | DLSS and Resizable BAR Configuration Made Easy. For 20 30 and 40 series cards unless specified otherwise.
Unleash the full potential of your NVIDIA graphics card! In this comprehensive tutorial, we guide you through the setup and utilization of NVIDIA Profile Inspector. Discover the secrets behind configuring DLSS effectively with presets and activating the resizable BAR feature for improved gaming performance. In this tutorial i discuss resizable bar and how to enable on various motherboards. I also talk about updating the bios and possibly the vbios on your gpu. If you do not know how to do a vbios update i highly recommend that you do not attempt to update the vbios on your gpu bad things can happen. However i did not need to update the vbios on my card rtx3080ti so you may not either. You will know once you enable the rebar settings if the nvidia control panel doesnt say yes then your gpu is not compatible and needs that vbios update but i will not suggest you do this if you don't know how to update the vbios. I also cover the New Dlss presets in the tool and show just how easy it is to implement the new preset E. I also cover ultra dlss and how to switch from multiple reduction levels . If you have any questions please let me know in the comments .. A Big thank you to our Captain's Club Members for your monthly support and thank you to all of our subscribers !!
*****************Link Section****************
-developer.nvidia.com/blog/nvi... Dlss preset info
-www.techpowerup.com/321209/nv... Dlss Dll file update info
-www.nvidia.com/en-us/geforce/... Rebar info
-www.asus.com/support/faq/1046... Asus mb
-www.msi.com/blog/unlock-syste... Msi MB
-www.gigabyte.com/WebPage/785/... Gigabyte MB
- • Msfs 2020*New Updated ... How to update the Dlss Dll File in msfs 2020 Make sure to use the latest version 3.7 or newer
-github.com/Orbmu2k/nvidiaProf... Profile inspector download
-www.nexusmods.com/site/mods/7... Xml file to run inside the nvidia profile inspector folder
- • Msfs2020*Performance S... Shader cache stutter fix
- • MSFS 2020 *Best Perfor... Nvidia Control panel Guide
- • Msfs2020*Improve Loadi... Reduce loading times in msfs
- • MSFS2020*Graphic Setti... Advanced Graphic settings for msfs
--------------------Time stamp section---------------------
00:00 start
00:25 Disclaimer
01:19 Todays video contents
02:57 Nvidia profile inspector download and install with new xml file
06:19 How to use the Nvidia profile inspector
09:03 Settings inside the inspector tool
13:49 What is resizable bar and how to activate on your Motherboard
22:29 Checking Nvidia panel To see if Rebar is active
23:24 Nvidia profile inspector Rebar settings
24:25 Dlss settings with presets
31:57 Credits
*********Affiliate link for the Pimax Crystal***********
- pimax.com/?ref=2020fsers
- 2020fsers coupon code to get an additional $20 off your purchase
(Vr rock lens coupon code and link is below)
******************************************************
We are now sponsored by Navigraph!!
Pick up your ,all in one Charts, Weather, flight planning, Airac updates (3rd party aircraft as well as updating Msfs2020) , in sim Toolbar Icon & Best of all G3000/5000 & gtn750 integration at, Navigraph.com
Navigraph charts intended for flight simulation only - not for navigational use
Join this channel to get access to perks:
/ @2020fsers
For custom VR lenses Check out this link and use the discount code to get 10% off your order! www.vr-rock.com/?ref=2020fsers
10% discount code: 2020fsers
Check out our facebook page / 1081420896026970
@2020fsers 3 ай бұрын
***************Nvidia Filter Users READ THIS : Do NOT turn off the 3 ansel settings i go over in the inspector settings. if you do the filter overlays will not work in msfs . Click the restore button to the right of the dropdown to restore that setting to default like i show in the video if you have disabled them************************************************* Sorry folks i had to reupload this video!! Those that do not see the dlss settings and hdr settings in the inspector means that you did not input the XML file into the profile inspector folder Please re check that you input only the file not the folder.
@Rafininhotheman 3 ай бұрын
So I restored all of the settings in inspector and just changed the DLSS preset but the nvidia ingame overlay only shows the image sharpening option and not the colored presets. What am I doing wrong?
@2020fsers 3 ай бұрын
Not sure what could cause that . The Ansel disable will not remove any settings it will only not allow them to take effect in the sim. So it must be something with overlays .
@Rafininhotheman 2 ай бұрын
@2020fsers I actually figured it out I was enabling Ansel settings globally not specifically for msfs
@2020fsers 2 ай бұрын
@Rafininhotheman ok cool glad you got it
@antoniopettini9503 2 ай бұрын
I use nvidia filter and FG option, but frankly speaking, due to my incompetence, I do not understand very well your warning. For instance I don't know what is the ansel. In other word having nvidia 4090 can i just update he dlls file to 3.7.0 and even update the dlss file frame generation without use nvidia inspector app? Or may be is better to wait your next tutorial? thank you in advance for your help
@kevenbeaudry5971 2 ай бұрын
Really good debrief as usual. I did that training with that spinning chair. It was in Winnipeg. It was a good lesson.
@Frankestein01nl 3 ай бұрын
Funny, how most dont follow the instructions, but ask the questions you've just about all already answered in the video. Guess that's youtube. Thanks for the perseverence in trying to get the ultimate msfs settings.
@2020fsers 3 ай бұрын
Lol thank you 😊 happy to help.. it comes with the territory..
@allanprewett4429 2 ай бұрын
Thank you. I had no knowledge of the inspector program. Great work.
@2020fsers 2 ай бұрын
Your welcome thanks for the comment 👍
@donjuanismo 2 ай бұрын
Thanks a billion! Your tutorials are the best!
@2020fsers 2 ай бұрын
thank you ! happy they help
@MartinGraeff 3 ай бұрын
Great man. This is just so clear and concise. There is some other dude who makes it too complicated. You explanations are the best. Thanks 4 sharing.
@2020fsers 3 ай бұрын
Thank you so much .. I spend lots of time on my videos to make them as clear as I can .. this video I started working on it at 10 am and didn't finish until 12 midnight after editing . Lots of time invested so it's really nice when people like yourself notice this and let me know . It's what drives me to do better and make more vids . Thank you .
@bakzetary3145 3 ай бұрын
Thanks for more useful tips sir! The older DLL Tweaks procedure was just too much to deal with just to test the change quality from 0.666 to 0.75 for me. I'm glad you discovered an easier way to do this and shared it, thank you again!!!! Keep these great suggestions coming!!!!! Because of them; starting this year was the first year in VR I could actually consistently achieve butter smooth and virtually stutter free framerates at only 30FPS in motion reprojection, (Which was the best settings I could achieve in my rig.) With all the updates to the program, by the end of last year, framerates were slipping down to 22.5 which was becoming unacceptable to even continue playing this until a major PC update in the future! Waiting to see what the 50 series will bring and try and get to 45FPS down the road!!!!!!!!
@2020fsers 3 ай бұрын
I try to make everything as simple as possible I'm very glad that my video has helped you thanks so much for the comment and posting your results
@joshkass Ай бұрын
OUTSTANDING! I have spent YEARS trying to get my rig to work right (i9/12900KF, 3080ti, 64GB). After SU14 and SU15, my FPS tanked! I tried everything I could think of, but no combination of anything was getting more then 15-20fps in the sim, and even only 22-25 in the menu (the "hangar"). I could not be more grateful! I think the DLSS DLL and the Re-BAR changes did the trick. Now, in the sim I'm getting between 50-60fps, and 90-100fps in the hangar on the main menu. ALSO, the GPU and CPU utilization is actually down to about 90%/50% respectively. Thank you SOOOO much!! Really!! I can finally enjoy my sim instead of just trying to make it work all the time. Now I just need to freeze everything in time, so it doesn't revert! :)
@2020fsers Ай бұрын
Thanks you so much for the super thanks 😊. I'm glad these tweaks helped you, so you can enjoy the sim again but I don't we can do anything about ms or asobo messing it up again lol. Thanks again
@joshkass Ай бұрын
@@2020fsers HAHA, too true!!!
@grahamt19781 2 ай бұрын
Really well explained, thank you 👍
@2020fsers 2 ай бұрын
Your welcome thanks for the comment
@plusde25kg 2 ай бұрын
Thx Chico crypto talk style 😂👍 thx for your video 👍👍
@2020fsers 2 ай бұрын
Your welcome thanks for the comment
@praywarrior24 2 ай бұрын
Subscription activated 😎 thanks my guy
@2020fsers 2 ай бұрын
Your welcome thanks for the sub 😀
@FabianoMarques-cq6ro 3 ай бұрын
Never said that before, this is awesome, Nice, clear tutorial and the 3.7E Plus rebar made now my system the best ever in years... surprised here with clarity, fps locked at 60 4k, 60fps head tracking soo smooth, in a 3080 10gb i710700k , nvidia clean drivers 551 52. 😂thanks a lot!
@2020fsers 3 ай бұрын
Thanks so much .. I'm happy this helped you 😀 thanks for the comment and results .
@FabianoMarques-cq6ro 3 ай бұрын
Really, awesome @@2020fsers
@ronniezx10r 2 ай бұрын
Man, thank you! This is Great. I was flying in TAA in VR because in DLSS the writing in the dash and gauges was a little blurry, now with this I can fly in DLSS with no blurriness and 57 to 60 FPS constant! Smooth as butter. Don't know if this also works in DCS but it's worth a try, I'm basically running 90 FPS constant in DCS in VR, but hey I'll try it anyway. ROG Crosshair X670E Hero, AMD Ryzen 9 7950X, Corsair DDR5 6000 32GB, Nvidia GeForce RTX 4090 with Varjo Aero
@TBMPilot736 2 ай бұрын
Hey Ronny, which Resolution do you use within the oxrtk in dlss?
@2020fsers 2 ай бұрын
Great to hear thanks for the comment
@ronniezx10r 2 ай бұрын
@@TBMPilot736 I'm not using the OxrTk, I'm using AutoFps with the Varjo Aero. Also using Process Lasso. I was using OxrTk a while back with the G2, but haven't used the G2 for a while. I'll try using OxrTk with the Varjo Aero to see what happens. I also stopped using it in DCS, so I'll have to try in both, who knows, maybe it could do some good, only tests will tell. I'll let you know.
@chrisibbotson6367 3 ай бұрын
Hi there. I never use DLSS as often got better image quality and performance using TAA on my 3080ti system at 4K. Decided to give your video again and have Resize bar enabled, the latest 3.7 DLSS file installed and went through all the Inspector options you demonstrated. I do use Reshade but the sim graphics are now somewhat 'flat' and lacking the dynamic lighting previously featured. I assume it is because in Inspector the "TrueHDR" settings of the profile are all set to OFF. I do not have HDR10 enabled on my monitor as previous tests when enabled affect the sim, I see a moire type weird shimmer, especially on water. I have HDR disabled due to this but do like the changes I normally get in the dynamic lighting eg when look at brighter sky the internal cockpit lighting goes darker and vice versa. I have changed some TrueHDR settings in Inspector to Enabled so will restart and test.
@2020fsers 3 ай бұрын
Okay there is one thing if you're using shaders or overlays or filters over your Microsoft flight simulator image I posted a pin comment about this In the Nvidia profile inspector do not turn off the Ansel settings that I go over , I went over three Ansel settings if you turn those off It will disable any overlays so reset those to default by clicking on the little restore button next to the drop down I also show that in the video of how to do that
@gizmon221 3 ай бұрын
Thanks for making these videos, especially for VR users. The dlss 3.7 on its own seemed to improve performance and ghosting was fairly low on the ultra quality setting in MSFS. Tried your extra steps with the inspector and it seemed to make ghosting worse on the Fenix a320 cockpit screens but improved fps, which i always struggle with the fenix. However part way into the flight my fps would crash to 20 for no particular reason and would bounce around from 20 to 35/37 at random. Will have to experiment with some of your settings ans see if i can get it go hold steady. Not sure why adding the E preset made ghosting worse though. Unless you've got any suggestions. Im running a 3080 with i7 10700k, virtual desktop.
@2020fsers 3 ай бұрын
Well like I say what works for 1 may not work for the other . The new preset has worked well for some and not others try preset F instead. Some people had to roll back to 3.6 due to artifacting so it's a try and test type of scenario.
@Aeye123 2 ай бұрын
thanks for the info you have pixxxmax I have quest 3 should I change my render settings.
@2020fsers 2 ай бұрын
That's hard to say I'm not sure . You also have the quest toolkit for rendering . I'm not sure what that was called
@theegodelpozo 3 ай бұрын
I've found some artifacts and ghosting when using the dlss 3.7. I wanted to know if you or anyone else is getting those back. I had to go back to 3.6 (dlss swapper). Beyond this, great video as usual. 🎉
@2020fsers 3 ай бұрын
I noticed slight artifacting almost like motion smoothing but it was only in certain areas and I thought it was my eyes some people have it worse from what I've seen but yeah 3.7 doesn't work roll back to 3.6 the only thing is you won't be able to use preset e in 3.6
@Daniguz2502 3 ай бұрын
As always making great videos 👍, by any chance after doind all those changes do you still have the game filters enable from geforce in your sim?? In my case, geforce is the enable but the filters does not show up in my msfs2020, but when I play others games the filters shows up. Any idea? I already tried to reinstall the geforce. I went to control panel and reinstall some drivers, but still nothing
@2020fsers 3 ай бұрын
Ok try this in the profile inspector reset all to default for msfs and retest . If it works it may be the Ansel options that I turned off in the inspector if that's the case don't turn those off like I did but everything else should be ok. I don't use filters I actually debloat my driver so I remove everything but what I need and that includes GeForce.
@Daniguz2502 3 ай бұрын
Yep my filters and anable now ;) thx my friend. I have to keep it in allow so my filters shows up. That is in the OTHER options
@2020fsers 3 ай бұрын
Yeah the 3 Ansel options I turned off just click on the restore button to the right of the drop down box to restore each 1 back to default. That's the only change .
@ItzSath Ай бұрын
Tried these DLSS changes with Ultra Quality on Cyberpunk 2077/Dragon's Dogma 2 and significantly changed the look for the better! Very happy with the results. Ghosting still there sadly.
@2020fsers Ай бұрын
Awesome glad to know it helps other games thanks .
@ItzSath Ай бұрын
Does not work with ray reconstruction, sadly.
@TBMPilot736 2 ай бұрын
Danke!
@2020fsers 2 ай бұрын
Thank you so much 💪🙏 I really appreciate it very happy this helped you. Next video I will be going over msfs setting and how to choose what's best for you .
@RockyMtPilot 2 ай бұрын
I have seemingly ruined my simulator updating to 3.7 dll. Before I had very few if any glitches, and now my simulator had a bunch of glitches and just crashed to my desktop. Ahh! I need to just leave things alone sometimes. My sim is running like crap now. It is totally my fault and not yours though. Every system is different. I want to thank you for all the work you do for the MSFS community.
@2020fsers 2 ай бұрын
no need to get frustrated you never know what is going to work on your system unless you try it. Simply revert the dll back to default or try the 3.6 version . some users had to roll back 1 due to some issues they have had with performance.
@RockyMtPilot 2 ай бұрын
Update...for reasons unknown I had to reinstall my varjo base software after upgrading the DLL to 3.7. My computer would completely freeze when I plugged in my Aero. Everything is running fine now. Thanks again my friend!
@2020fsers 2 ай бұрын
@RockyMtPilot ok good that is a strange thing glad you got it sorted
@Koosey1987 2 ай бұрын
Thanks for this. I'm using DLSS DLAA in sim and am a bit confused about what to set as a profile and forced renderings scale in NVI?
@2020fsers 2 ай бұрын
If you're using DLaa then you don't need to force any scaling , That's the highest render level that you can pick.. Like I described in the video, If you're someone that cannot use the DLAA because it's too hard on your system and quality is just not good enough ,As far as clarity, and you have overhead, then you can force a higher resolution to get better image clarity.. As far as the profile to Select, I would use the best one for your system. Choose the profile that gives you the best performance as well As the best picture quality as far as ghosting. I use preset e as depicted in the video But that may not be the best for your system.
@Koosey1987 2 ай бұрын
@@2020fsers Thanks alot. I put force render scaling to off and went with Preset F, it's made an unbelievable difference, no ghosting and really sharp instruments.
@2020fsers 2 ай бұрын
@Koosey1987 awesome 👌 glad to help
@TBMPilot736 3 ай бұрын
Hey man, great video! Amazed by your knowledge! I have two questions though: 1. will I profit from preset E when I’m exclusively using the DLSS quality mode? 2. Will I profit from changing scaling ratios when at the moment I’m supersampling within oxrtk to 4600x…? Much appreciated!!
@2020fsers 3 ай бұрын
Yes preset e is made for dlss and should work well with the updated 3.7 dll file. But try f as well you may find you like 1 over the other. Scaling yes for sure if you are upscaling then using a higher scaling ratio may make things ever clearer for you but if you go to high your performance will drop. So start at .75 and work up until you get to the point where you feel your performance isn't good then drop back 1 scaling res. Thanks for the comment
@TBMPilot736 2 ай бұрын
@@2020fsers ok, great, thanks!
@ThomasBaier-np9is 3 ай бұрын
Thanks for your very detailed and competent explanations. I do have 2-3 questions, while using a very similar setup (4090 Crystal while on FS2020 the system is running stable CPU load +- 30% and GPU +- 90%) What I am especially trying to fix is stuttering with the Crystal in cockpit while moving my head?? I´ve tried a lot of things while I think its FS2020 not the system (no problems with DCS), but never really getting in a smooth experience. Do you have similar issues and may have tips, or directions I have to look for? 2. Any reason why you are not using Framegen and DLAA? best regards
@2020fsers 3 ай бұрын
Thanks for the comment so first off I do not have a 40 series graphics card I have an RTX 3080 TI. Second frame generation does not work in VR. I am using dx11 As well as the open XR tool kit and pimax XR to bypass steam. I have my render resolution set at 100% in the pimax pie tool or whatever it's called and in the open XR toolkit I've rendered at 3900 and I'm also using dlss quality and I get anywhere between 35 to 45 FPS and it's smooth. try switching out of dx12 and go to dx11 when I use dx12 and VR it's horribly stuttering.
@2020fsers 3 ай бұрын
And I don't use d l a a because my frame rate at a 3900 render resolution I'm only getting about 25 FPS
@ThomasBaier-np9is 3 ай бұрын
@@2020fsers thanks, I will try again with DX11, but I hade this stutters from the head movements in DX11 as well.
@GLYNCURTIS 2 ай бұрын
Everything in flight is working really well but whenever I bring up a UI window like ATC or the VFR map it sort of tears and glitches when I turn my head using Tobii eye tracker?
@2020fsers 2 ай бұрын
Ok you.may need to turn on vsync in the sim use 100% is fine but for some reason it works.
@scottb9628 3 ай бұрын
Not sure what happened, but rbar was enabled a while ago, but now it was not. Good thing to double check once in awhile. Thanks!
@2020fsers 3 ай бұрын
Your welcome thanks for the comment
@renee.castaneda1303 3 ай бұрын
Hello, My Nvidia profile inspector shows MSFS rBAR options but not my Nvidia control panel. Would it work if I enabled it through inspector settings or do I need to go through the steps of updating bios?
@2020fsers 3 ай бұрын
Did you enable rebar in your bios?
@vonduck1 3 ай бұрын
Awesome as always! Question - if i am using the Inspector for my settings, can i or should i rmeove NCP as could cause conflicts? Does one over ride the other? Cheers!
@2020fsers 3 ай бұрын
Thank you ... no keep the ncp. They work as 1 unit they will not conflict. Think of it as an nvidia control panel on steroids that allows you to have much more control over all of the settings. So if you make a change in the nvidia control panel, it will also show up on the profile inspector.
@vonduck1 3 ай бұрын
@@2020fsers Brilliant thanks heaps! Keep up the awesome work!
@2020fsers 3 ай бұрын
Thank you 😊
@TBMPilot736 3 ай бұрын
@@2020fsersquestion: if I restore the settings to default within the profile inspector, will it also restore all settings to default within the NCP? Would that erase all your previously suggested changes, that so far have been a great improvement to the sim?
@2020fsers 3 ай бұрын
@TBMPilot736 yes it will anything you do in 1 will show in the other. Same if you reset your ncp setting they will reset in the profile inspector. Use the restore button to the right of the drop downs like I show to restore only the 1 setting
@citylimitsphoto 3 ай бұрын
I don't think I need Inspector except for the Preset E selection. I have both the new Nvidia Driver and DLSS 3.7 on my system and have had a doubling of FPS and some graphic quality improvements. Landed at IniBuilds EGLL with FSLTL traffic set to 70% and my FPS were in the high 70s/80s on final till roll out.. Just imagine if they would have made these LEAPS in the MSFS 2000-FSX days.
@2020fsers 3 ай бұрын
Yeah I go over several thing here but only use what you need . If you only want to change presets and scalling for dlss then use that part of the video . It's very easy to change dlss settings via the inspector and easy to go back as well. Thanks for your comment ..
@Tom-van-Rijnn 3 ай бұрын
I Iove those Danny Ocean Vibes! ✌️ Just one question: is it dangerous to update the VBIOS? 😄😄 Thanks again for the great video.
@2020fsers 3 ай бұрын
lol You're welcome just remember don't do it lol
@Tom-van-Rijnn 3 ай бұрын
@@2020fsers 😄
@2020fsers 3 ай бұрын
hey i just saw that you are a Captain's CLub memeber thanks so much for joining if you need anything let me know if you have facebook join the group and message me if you have a question but depending on time of day i may not respond right away..
@Tom-van-Rijnn 3 ай бұрын
@@2020fsers I have to thank you, your content was very helpful in the last years.
@user-zw4bg6dk6b 2 ай бұрын
Does anyone have a drag problem? My previous dll had this problem by default,and the problem improved a little
@hbwgaming 2 ай бұрын
Amazing tutorial. I had another issue that I am currently trying to tackle. Whenever I’m parked at the gate or taxing on the taxi way, the traffic around me has a blur or a fuzzy effect around the moving traffic. I have searching high and low on a fix to resolve this issue but had no luck. How do I resolve this issue?
@2020fsers 2 ай бұрын
Thanks for the comment ... maybe try and turn off fringe in the cfg file for msfs
@hbwgaming 2 ай бұрын
@@2020fsers Where can I find my cfg file for msfs?
@2020fsers 2 ай бұрын
kzfaq.info/get/bejne/d6iWotqpqcq-c2Q.html
@Viperrm64 Ай бұрын
Hi there, downloaded latest NVInspector but cannot find settings for DLSS anywhere, I'm runnibg DLSS 3.7 using DLSS Swapper in MSFS, do I need to be in DX12?
@2020fsers Ай бұрын
That means you did not install the XML file in the profile inspector folder that I went over in the video.
@richardPalmisano 3 ай бұрын
ok buddy you know i have 4090 and updated 3.7 dlss and im also a vr user all the time so do you think it is worth it to get the nvidia profile inspector and if so i guess i would want more clarity so which setting would benefit me for vr or do you thnik im good for what i got.
@2020fsers 3 ай бұрын
It depends .. do you use dlss? If so yes it would be good so you can adjust the presets and scaling options if you need.
@richardPalmisano 3 ай бұрын
@@2020fsers yes I use dlss with msfs and my override resolution is set at 3500 with open xr tool kit so I guess I could use the preset E for a sharper image as you did. oh by the way I'm also a pimax crystal user. will
@Buddy308 2 ай бұрын
I've imported and installed version 3.7 of the DLSS .dll and enabled DLSS Preset E in Profile Inspector. I'll run the sim without Frame Generation but with DLSS set to DLAA. My driver is not the latest but I've stayed with it because the sim is running perfectly stably and smoothly with it. Is it important for the new preset to be run with the latest Nvidia driver, or does it work equally well with other "recent" drivers?
@2020fsers 2 ай бұрын
I think it should work with all drivers. The setting isn't available unless you update the dll file so I think it falls back on the dll file more so than the driver. If you revert back to v3.6 dll the preset e won't be available.
@Buddy308 2 ай бұрын
@@2020fsers Thanks! I'll try it today with my trusty 536.67 driver and report back here if there's any problem
@77flyer 3 ай бұрын
Boss just joined your premium channel, i have a 3080 ti using a 3440x1440 monitor, what DLSS settings u recommend?
@2020fsers 3 ай бұрын
Thanks for joining I appreciate that . You can also message me on Facebook messanger as well . We'll that a hard question without knowing what type of performance you are getting . In Microsoft flight simulator in the FPS tool. What FPS are you running? What is your v RAM usage? And what does it say is limiting you?
@2020fsers 3 ай бұрын
I would try preset e to start. And then you can try the dlss scaling settings start low like .75 and work your way up until the performance starts to go down.
@ivandiazpadilla9231 2 ай бұрын
excellent video, you have a tutorial on how to configure the gforce experience filters, but first how can I link or add the FSM to geforce experience
@2020fsers 2 ай бұрын
Thank you.. I personally don't use GeForce or any GeForce items I debloat my driver of all that stuff.
@ivandiazpadilla9231 2 ай бұрын
@@2020fsers I understand you when you play at 5k and add the filters it looks more realistic, it is respectable for those who like the image, and for others the performance and for another group an intermediate point of both. I appreciate your time too much
@vdi1986 2 ай бұрын
what settings do you suggest for rtx 4090 and i7 14700k? for 1440p?
@2020fsers 2 ай бұрын
Not sure I understand what you are asking what settings in particular 🤔 I went over everything in the video and what I recommend and how to change dlss settings. You have to use the settings that work best for you on your system.
@omartg 3 ай бұрын
for the DLSS scaling ratio. once i set to 0.88. what do i set in my MSFS ingame settings? should i leave it on DLAA in game or Quality? can i mess with the scaling ratio in profile inspector while in MSFS? thank you for the time!
@2020fsers 3 ай бұрын
ok once you force a scaling setting in the profile inspector it overrides all of the dlss settings other than dlaa . so if you look at the options you have in the sim is now ultra quality , quality , balanced , performance and ultra performance . since you forced a scaling ratio of .88 that overrides all of those options so you can set the in sim setting to performance and it will still render at .88. but do not set the in sim to dlaa as that will be different , that is the highest scaling method dlss dlaa. i assume scaling ratios need to be set when the sim is not running but i havent tested that.
@omartg 3 ай бұрын
@@2020fsers got it. Thank you for the reply
@davidmou7433 2 ай бұрын
Hello, I did everything that was said in this video, I use TAA 2560x1440p, I have a 4070 and an I5 14600KF and 64gb ram, I see the airplane screens as very bright and they flicker when I move the camera, and they look a little blurry when I move away a little. If I'm closer it looks better, could you help me, thank you.
@2020fsers 2 ай бұрын
i need more info . are you using dlss dll 3.7? if so revert back to default and test again to narrow it down. Are you using frame gen if so turn it off and retest .
@saalimqamar 2 ай бұрын
Thanks for this detailed guide good sir. Quick question, I followed your steps in order but I see Preset E (unused). Even if I saved it, when I reopen Profile Inspector, I off next to it. Did I miss something?
@2020fsers 2 ай бұрын
That means you did not either download the latest nvidia profile inspector or you didn't install the xml file I show in the video.
@saalimqamar 2 ай бұрын
@@2020fsers interesting. I will double check what version of profile inspector I have as I already had it before following this guide. I did install the cml file though to ne able to see those options though afaik. I will check again and report back.
@saalimqamar 2 ай бұрын
@@2020fsers Was able to get the Preset E without the "unused" next to it after reinstalling NPI. Thanks for your help.
@2020fsers 2 ай бұрын
ah ok glad you got it sorted
@vincentromano_8z 2 ай бұрын
Bonjour, est-ce que ce tutoriel fonctionne sur une RTX2060 svp ? Merci d'avance. Cordialement.
@2020fsers 2 ай бұрын
Merci pour le commentaire .. Tout sauf rebar. rebar est uniquement pour les séries 30 et plus
@Backsplash67 2 ай бұрын
Does any of this apply to a user with an RTX 2080 Super card? Or is this for RTX 30 and 40 only?
@2020fsers 2 ай бұрын
Everything but the rebar stuff .
@ghulamshabbir6242 3 ай бұрын
Hi Bro I have 13th Gen core i9 with RTX 4090 GPU. Please all these settings will work for laptop or not?
@2020fsers 3 ай бұрын
Yes they will .
@Xlastsuspectx 3 ай бұрын
And the final results? :D
@felipematoso5103 2 ай бұрын
I don't know what happens here on my PC, but in my NVIDIA Profile Inspector the DLSS options do not appear as shown in yours. My GPU driver (4060Ti) is already updated to the latest version and my DLSS is already 3.7. What could be happening?
@2020fsers 2 ай бұрын
That means you did not copy the xML file (that I show in the video) into the nvidia profile inspector folder.
@TaitHaldane 2 ай бұрын
How do I update the profile inspector without Microsoft flight sim so I can get the new presets? Cheers
@2020fsers 2 ай бұрын
I'm not sure I understand.. I go over in the video where to download The profile Inspector as well as the x ML file to install into the folder. Microsoft flight simulator is not a factor in any of the process.
@ronniezx10r 2 ай бұрын
When we update the Gpu driver, we have to redo these steps. I just updated and noticed that everything went back to default
@2020fsers 2 ай бұрын
When you update your driver the dll file will stay the same but your nvidia panel settings as well.as inspector settings will need to be reset.
@luigiermannomartinelli6422 Ай бұрын
Hi, why can't I find the DLSS section in my inspector? yet it is the latest version installed. I have an RTX-4070 Super
@2020fsers Ай бұрын
That means you didn't put the XML file in the folder that I went over in the video
@Bucketles0 3 ай бұрын
Hello my friend . I have the Rtx 4070ti graphics card and ryzen 5 5600X processor. I use Fenix a320 and fsltl traffic modes. I also fly many times at Modlu new Istanbul airport. But fps travel around 20-30. Moreover, my dlss setting is like this even though dlaa and nvidia square creation is on. If I make the settings you made, will I see an increase in fps? Have a nice day and thank you
@2020fsers 3 ай бұрын
thats hard to determine if you would see a fps boost . every system is different and ive heard all kinds of outcomes some people get a 5 to 10 fps boost just from updating the dll file and other dont see a increase . its just something that you would have to try .
@Bucketles0 3 ай бұрын
@@2020fsers Thanks for the answer. Also, does this fps drop have anything to do with my system or is it a problem with optimization in the game?
@2020fsers 3 ай бұрын
The fenix has an fps drop do to the complexity of the aircraft
@sharkfisherman1884 2 ай бұрын
getting this error- This XML file does not appear to have any style information associated with it. The document tree is shown below.
@2020fsers 2 ай бұрын
I do not know what that error is. You probably tried to open it and got that error. No need to open it just input in the profile inspector folder.
@Aza35617 2 ай бұрын
Hi Mate, followed all your instructions step by step, ive manually updated my dlss fiel as the dlss swapper wouldnt let me import, id click on it and nothing happens. now in my nvidia control panel my first option is Compatibility, I dont have the true hdr and dlss options? ive checked and my rebar is enabled. Any ideas guys?
@2020fsers 2 ай бұрын
Hello you shouldn't need to import the files anymore in the swapper they are all up to date in the tool now. 2nd for the inspector issue that means you didn't input the xml file into the profile inspector folder .
@Aza35617 2 ай бұрын
@@2020fsers Hi Mate, Thanks for the fast reply, I downloaded a dlss frame gen file through your video link, i copy and pasted it into msfs folder, it asked to replace my old one, i clicked yes, Will it be okay to leave that in there? in the dlSS swapper app i updated it in there to version 3.7.0.0. _ As for the XML file do you have a video link where to get it and drop it in the inspector folder please? ive confused myself with all this lol
@2020fsers 2 ай бұрын
the xml link is in the description .. and yes if you replaced the one you have then thats ok .. in the future use the current 1 as a backup by changing the .dll to .bak and then copy the new file in there and it wont overwrite the default file.
@captainparamo4814 2 ай бұрын
Why do I have in my msfs2020 settings “AMD FSR 2” instead of “NVDIA DLSS SUPER RESOLUTION”? Is not showing nvdia setting anymore!
@2020fsers 2 ай бұрын
Are you using dx11 or 12? I get those additional setting choices when I use dx12.
@jroc6345 2 ай бұрын
Would you recommend any of these steps to me if Im already CPU bottlenecked and not using DLSS (but TAA) in VR?
@2020fsers 2 ай бұрын
I would switch to dlss dll 3.7 that may give you more fps . Lots of taa people have said that. Also rebar may also help you for latency.
@jroc6345 2 ай бұрын
@@2020fsers alright, thanks a lot!
@2020fsers 2 ай бұрын
Your welcome
@jroc6345 2 ай бұрын
@@2020fsers Your channel is really helpful to many. Much appreciated
@tarrowdriver 3 ай бұрын
Do these tweaks have any impact on VR performance in MSFS?
@2020fsers 3 ай бұрын
Yes I fly mostly in vr
@user-zw4bg6dk6b 2 ай бұрын
confirm it is suitable for 30series
@2020fsers 2 ай бұрын
Yes it is .
@giorgioramones5272 2 ай бұрын
Do you keep your monitor resolution native or should I upscale with dldsr?
@2020fsers 2 ай бұрын
I keep mine native . But it all depends on what your system can support .
@giorgioramones5272 2 ай бұрын
@@2020fsers the only thing if i upscale vr doesn’t work
@2020fsers 2 ай бұрын
Ahh, ok well if your using vr then dldsr is moot because you'r not using monitor anyway. I'd run native anyway because you want as less stress on the gpu from your monitor as possible.
@jamesbiggleworth4458 2 ай бұрын
Thanks for the video but these settings do nothing, nothing (including the nVidia CP settings) to improve my MSFS experience on a RTX 4070, 11th gen core I9 (tiger lake) and always the PiMax Crystal VR headset - VR is absolutely stunning! All I want is crisp visual especially the instrument panel and smooth scenery motion in built up areas. What I have done is the nVidia clean install of drivers, loaded the nvidia dllsg, and the other 3.7 dlss using the dlss swapper. I get the same performance using a standard install of the nVidia drivers (not using the clean install) and the default settings for profile inspector and the nVidia CP.... I guess it comes down to do what works for you. I get the better performance using TAA using a setting of 60-70 in MSFS than using the better quality image with nVidia DLSS super resolution for both quality and ultra quality. I am not chasing FPS I just want clarity and smooth scenery flow.
@TBMPilot736 2 ай бұрын
Hmm, have tried Preset E with DLSS 3.7, I still see ghosting, am I missing something?
@2020fsers 2 ай бұрын
Please remember not all settings will yield the same results on all systems. For some it has removed all ghosting and others like myself I still see a small bit however it is less than before. You can also try other presets to see what yields you the best results. We need to try everything because you dont really know what will work best until you try it.
@user-po7xi9uw3j 2 ай бұрын
After doing this it seems my whole sim reset itself or something. It's asking me to choose graphic settings, hardware settings etc. All butting mappings are gone. Not sure what went wrong here.
@2020fsers 2 ай бұрын
I'm not sure either that is the first I have heard that. Im sorry you had to reset everything it's never my intention for mishaps to occur but with pc I guess anything is possible .
@Photoshopmanipulator 3 ай бұрын
cannot use rBar do I still make the changes in the invidia inspector. thank you
@2020fsers 3 ай бұрын
If you're not able to use Rebar, then don't mess with the settings In the inspector tool for rebar
@Photoshopmanipulator 3 ай бұрын
ok thank you,but is it ok to make the other changes with the invidia inspector along with the 3.7 DLSS,I have a asus RTX 3090 with a i7 intel,and a 4K monitor ,all of the suggestions has made my system run great, thank you for helping so many of us
@2020fsers 3 ай бұрын
Your welcome yes all the other settings should be fine. Make sure to try preset e for dlss. One quick note if you use any in nvidia filters Then do not turn off the 3 Ansel setting that I go over leave those default.
@Buddy308 3 ай бұрын
I haven't made any changes in DLSS files because I want first to thoroughly digest all the videos on these manual modifications. So the question is this: if using DSLL Tweaks, a part of the process includes a Registry edit. WHY is that Registery edit not done with this Profile-Inspector method of introducing the E presets? I ask because I'm left a little concerned that the process described in this video might be incomplete
@2020fsers 3 ай бұрын
What registry edit are you talking about ? And why is it needed?
@Buddy308 2 ай бұрын
@@2020fsers I'm talking about the .reg file that's included in the DLSS Tweaks download. It creates a new Registry entry without which the E presets will not be effective. Since the net result of what you're doing with Profile Inspector is identical to what DLSS 3.7 + DLSS Tweaks does, it's important to understand how or why the Registry edit is so important in one method but not used in the other
@2020fsers 2 ай бұрын
Ok like I asked what is the purpose of the reg edit? the reason is because the dlss tweaks require you to replace a nvngx.dll file and because you are replacing that file you need a reg edit so that it does not do a signature check on that file. It states all of this on the webpage for the dlss tweaks tool . With the nvidia profile inspector you are not replacing any dll file so signature checks will be fine. I did my research and I wouldn't show things half way . Here is the page take a look github.com/emoose/DLSSTweaks From the site However this method requires a small registry tweak to be applied first to stop DLSS from checking the nvngx.dll signature. After setting up the registry tweak you should be able to just copy the nvngx.dll & dlsstweaks.ini files next to your game EXE, and it should hopefully load into the game fine. You can check out this wiki guide for the profile Inspector and the first section is an install guide you will see no reg edits are needed. stepmodifications.org/wiki/Guide:NVIDIA_Inspector#Installation_&_Setup All of this info is on the link that I gave everyone for the gitgub to download the profile inspector github.com/Orbmu2k/nvidiaProfileInspector?tab=readme-ov-file
@Buddy308 2 ай бұрын
@@2020fsers Superb answer. I'm not a computer pro, so these little details escape me if not explicitly explained. Thanks again for a great video!! I don't like registry edits much, so, although this one seems pretty harmless, I think I'll use your method instead of the one from DLSS Tweaks.
@Buddy308 2 ай бұрын
@@2020fsers I didn't mean to imply that anything was wrong. I just noticed the difference and wanted to be sure before proceeding. I think I made that clear. Sorry you took umbrage. I do appreciate your videos.
@DeltaTristar500 15 күн бұрын
Im on drivers 552.22 and my Inspector is version 2.4.0.4 but mines does not have #1 True HDR or #2 DLSS sections
@2020fsers 15 күн бұрын
Then you didn't input the xml file in the folder that I went over in the video
@DeltaTristar500 15 күн бұрын
@@2020fsers oops did not. Thanks. How's we watching your video I did originally placed the folder in there when you first posted the video and forgot that part I when I rewached it
@2020fsers 15 күн бұрын
@DeltaTristar500 lol it's all good glad you got it sorted
@kartal2339 3 ай бұрын
İ have a flickering with pmdg b737 in cockpit camera when i turn it fastly... Is it normal?
@2020fsers 3 ай бұрын
what gpu ? and are you using frame gen ?
@kartal2339 3 ай бұрын
@@2020fsers 4070ti super yes i use FG on with TAA 2k ultra
@stefantrinidad513 Ай бұрын
if you don't have any nvidia component would it still work?
@2020fsers Ай бұрын
No this is only for nvidia gpus
@stefantrinidad513 Ай бұрын
@@2020fsers ohhh okay, are there any for AMD Ryzen?
@2020fsers Ай бұрын
Not that I know of
@billt2341 3 ай бұрын
RTX 3060 here, is any of this stuff applicable to me? (I have noticed 40 series only here)
@2020fsers 3 ай бұрын
Yes all of it applies to 30 series cards
@billt2341 3 ай бұрын
@@2020fsers Thanks, I hope it is simple, I am 86 years of age and not a techie.
@2020fsers 3 ай бұрын
Skip rebar then and do the other stuff 1st .. and if you feel more confident then maybe take a look at that.
@billt2341 3 ай бұрын
@@2020fsers Okay, perhaps I will do that, thanks for your interest in me, I appreciate that.
@charleschilders2041 2 ай бұрын
Sorry, I do not download anything that requires me to register (the XML file). There is way too much of my info floating around as it is.
@2020fsers 2 ай бұрын
You need to create a profile for nexus but you shouldn't need to give any info
@manavparekh7147 3 ай бұрын
No Voice
@2020fsers 3 ай бұрын
reresh it just uploaded
@francoisrumley8236 2 ай бұрын
Merci !
@2020fsers 2 ай бұрын
Wow thank you so so much🙏I really appreciate it.
@southbeach09 2 ай бұрын
More snake oil
@2020fsers 2 ай бұрын
Love snake oil keeps things running smooth
MSFS 2020 *Best Performance Settings Explained Nvidia Panel* Monitor & VR: Reduce Stutters ISLC tool
2020 fs'ers
Рет қаралды 50 М.
Полярная звезда - Kuzey Yıldızı
Рет қаралды 7 МЛН
МИЛАНА ТУТ 👀
Рет қаралды 6 МЛН
Easyjetsimpilot
Рет қаралды 58 М.
2020 fs'ers
Рет қаралды 14 М.
2020 fs'ers
Рет қаралды 33 М.
DannyzReviews
Рет қаралды 113 М.
max737Ifly
Рет қаралды 1,9 МЛН
MSFS2020*Increase Fps & Reduce Stutters-Ultimate Guide* Debloat your Nvidia Driver -Game Changer WOW
2020 fs'ers
Рет қаралды 22 М.
northwestrepair
Рет қаралды 1,9 МЛН
SimHanger Flight Simulation
Рет қаралды 72 М.