MSFS2020*Increase Fps & Reduce Stutters-Ultimate Guide* Debloat your Nvidia Driver -Game Changer WOW

MSFS2020Increase Fps & Reduce Stutters-Ultimate Guide Debloat your Nvidia Driver -Game Changer WOW

Рет қаралды 22,316

2020 fs'ers

5 ай бұрын

Introducing the Ultimate Performance Guide: Debloat Nvidia Driver & Increase MSFS2020 FPS GAME CHANGER
Looking for a comprehensive guide to unlock maximum performance in MSFS2020? Your search ends here! Join us as we introduce the ultimate performance guide, focusing on debloating your Nvidia driver and increasing your frames per second. In this video, we'll guide you through simple steps to remove unnecessary components, reducing stutters and boosting FPS. Get ready to enjoy smooth and immersive flights like never before! This is an update to my original guide . This has the updated settings for nvclean install. I have seen a 30% increase in fps when using this technique and has made my gameplay so smooth and has done so for thousands of others see the comments on the 1st video link below. If you have any comment please let me know below and make sure to share with your friends don't hog up the awesome gameplay lol . If you enjoy todays content hit the subscribe tick that bell for notifications and smash the like it really helps us get found by more viewers like yourself.
A big thanks to our Captain's Club Members for your added monthly support and thank you to all of our subscribers and commenters .
***********Link section*************
-www.dell.com/support/kbdoc/en.... How to boot into safe mode
-www.techpowerup.com/download/... Nvclean install link
-www.wagnardsoft.com/content/D... Display driver uninstaller app.
- • Msfs2020*Huge Performa... Original video performance hack Debloat
- • MSFS 2020 *Best Perfor... Nvidia settings guide 2024
- • Msfs2020*Performance S... Shader cache stutter fix
- • Msfs2020*Reduce Stutte... dynamic lod mod msfs2020
-www.nvidia.com/Download/index... Nvidia driver download
*********Affiliate link for the Pimax Crystal***********
- pimax.com/?ref=2020fsers
- 2020fsers coupon code to get an additional $20 off your purchase
(Vr rock lens coupon code and link is below)
******************************************************
We are now sponsored by Navigraph!!
Pick up your ,all in one Charts, Weather, flight planning, Airac updates (3rd party aircraft as well as updating Msfs2020) , in sim Toolbar Icon & Best of all G3000/5000 & gtn750 integration at, Navigraph.com
Navigraph charts intended for flight simulation only - not for navigational use
Join this channel to get access to perks:
/ @2020fsers
For custom VR lenses Check out this link and use the discount code to get 10% off your order! www.vr-rock.com/?ref=2020fsers
10% discount code: 2020fsers
Check out our facebook page / 1081420896026970

Пікірлер: 240

@2020fsers 5 ай бұрын

I miss spelled performance at the 1 min mark eh I am human 😂. You probably didn't notice anyway ....

@Ahmedblaser 5 ай бұрын

Well you misspelled misspelled here too 😉

@2020fsers 5 ай бұрын

That is on purpose lol

@salmopr 4 ай бұрын

Yeah I did , lol , -- this fix works fine for me Let me ask you, what's the benefits for being a member of the channel, especially when it comes to the sim

@2020fsers 4 ай бұрын

All of the perks should be listed there. The only thing that's not listed is you will have access to all the videos before anybody else.

@TDiver-hy3st 5 ай бұрын

Awesome as always! Thank you for the latest tweaks! I can honestly say after 40+ years of building PCs and using MSFS, your settings have given me the best performance on my systems (*completely understanding no two like systems will ever work "exactly" the same).

@2020fsers 5 ай бұрын

Thank you 😊.. yes some people seem to forget that about systems . What works for me may not for you .

@MrMarblboro 4 ай бұрын

Same things...

@martinhsl68hw 5 ай бұрын

It's ridiculous that all this is necessary! Thank you!

@2020fsers 5 ай бұрын

Your welcome thanks for the comment

@pilotembgamers4644 5 ай бұрын

Excellent tutorial! One note for enabling safe mode. If you open DDU and click the options tab there’s a “Enable Safe Mode dialog” that lets DDU start your PC in safe mode automatically without having to go thru windows. I’ve done this for years without issues. Cheers!

@2020fsers 5 ай бұрын

Awesome tip thank you so much . 👌

@glenndefrancesch3557 5 ай бұрын

Thanks Again Jon. Another well explained tutorial, that has worked like a treat

@2020fsers 5 ай бұрын

Awesome glad it helped . 😀 all members will have first looks now at all the videos before everyone else .

@2020fsers 5 ай бұрын

Repeat the process for any new drivers.

@glenndefrancesch3557 5 ай бұрын

much appreciated@@2020fsers

@glenndefrancesch3557 5 ай бұрын

most definitely. The only way to install a driver update for NVIDIA@@2020fsers

@2020fsers 5 ай бұрын

This is my go to method every time .

@GLYNCURTIS 3 ай бұрын

OMG.... I think I'm in love with you..... lol man you have made my day, it works flawlessly ------- BUTTER SMOOTH on my 2070 Super and really glad I took the gamble that the software would enable lower end graphic cards to get great results! cheers bud

@2020fsers 3 ай бұрын

That's awesome 👌 thanks for the comment , happy it helped you.

@simonw9654 5 ай бұрын

Really interesting comparison...what a difference!

@2020fsers 5 ай бұрын

I hope that's a good thing lol 😆 thanks for the comment

@biiokemisten 5 ай бұрын

Will certainly try this. Thanks.

@2020fsers 5 ай бұрын

Your welcome thanks for the comment .

@tedwaetford 5 ай бұрын

Oh jeez, I was following along carefully thinking what a thorough job you are doing explaining this complex process, then right when DDU is cleaning out my existing driver, you mention "you'll need to re-apply all you Nvidia control panel settings"!!! fek, wish you'd mentioned that earlier so I could have taken a screenshot!! otherwise a very good video

@2020fsers 5 ай бұрын

Thanks for the comment . It's a good idea to watch 1st lol. Screenshot your settings is a good thing to do .

@tedwaetford 5 ай бұрын

@@2020fsers not a problem. just means I have to watch another one of your videos to adjust my CP settings 🙂 you do an excellent job explaining what things mean rather than just blindly setting stuff. best videos in this class on YT IMO

@2020fsers 5 ай бұрын

@tedwaetford thank you . I try my best to help . Glad you like the vids .

@theegodelpozo 5 ай бұрын

Hey, first at all, thank you so much for all you do for the community. I think you're a very valuable resource for the s'ers. You have a friend and follower in Argentina. I'm just wondering if this helps with a 4090 + Quest 3 + 7800x3D. I will test this out today and report. BTW I want to share with you my experience with the Q3. I use virtual desktop and with OpenXR Toolkit I get AMAZING resolution and performance. I only supersample (override resolution) in the OpenXR Toolkit menu to 5800 x 6072 and wow... Crisp and beautiful. I know it sounds weird and non sense to use that exaggerated resolution but for some reason the results are incredible. I told this to the VD developer and he can't explain what's happening. 😂 Just wanted to share with you my experience. I will report the results ASAP from your tutorial. Thanks thanks thanks 🙏!!

@2020fsers 5 ай бұрын

Thank you 😊 that is some great testing results. I see I say this time and time again. We have to keep testing different things. Because you never know what's going to work.. I'm sure this information will help someone with a quest 3 thanks for posting it. You've got a pretty awesome processor so this may not help you as much as it may someone else, but it's always worth a shot and very easy to go back if you don't like it..

@theegodelpozo 5 ай бұрын

@@2020fsers Hey man, exactly. Well I did test the driver debloat and honestly I didn't get better results. Maybe like you said.. I'm in the border of limitations of improvements. But believe me, even with this setup VR and Fs2020 are still pushing out of the limits! Hopefully the 2024 will make VR better. Thanks again!

@2020fsers 5 ай бұрын

@theegodelpozo your welcome

@mahmoudchannoufi6191 5 ай бұрын

thank you for your video it is so helpful

@2020fsers 5 ай бұрын

Your welcome thanks for the comment

@Munky332 5 ай бұрын

I picked up about 20% in DCS (2d screen) with 551 drivers (at 4k, with a 4090, with 4x MSAA. I'm generally a VR only guy, going to try that next)

@2020fsers 5 ай бұрын

Awesome thanks for the comment

@citylimitsphoto 5 ай бұрын

Thanks for the update. Have you considered doing a complete video for those of us who use the Nvidia Frames Generation MOD?

@2020fsers 5 ай бұрын

What do you mean? You should be able to do this with the frame gen mod.

@brianharris1830 5 ай бұрын

I appreciate your efforts!! Thanks you see you on Patreon

@2020fsers 5 ай бұрын

Your welcome and thank you 😊

@jefftaylor156 5 ай бұрын

Great video and instructions on how to. My only problem is getting rid of the Geforce Exp, is it takes the filters away. MSFS is so washed out and bland without the filters. But i did notice a uptick in FPS and performance with regards to stutters.

@2020fsers 5 ай бұрын

Hey thanks for the comment ..You can try and adjust the colos in the nvidia panel and up the vibrance .I went over this in my nvidia video in the description. It might be worth the performance bump .

@salmopr 4 ай бұрын

Thanks!

@2020fsers 4 ай бұрын

Your welcome and a big thank you 😊 to you my friend 🧡 I really appreciate the support 🙏

@Texas4x 5 ай бұрын

Hi Jon. Was there a reason you picked the 546.01 to debloat rather than the newer 551.23 driver? Thanks for doing this.

@2020fsers 5 ай бұрын

Well as you see I downloaded both and have been testing I seem to have less stutters with 546.01 then the new driver .. your welcome and thanks for the comment

@rafalrazmus 5 ай бұрын

I gained about 4-5 fps from 60 to 64-65 in PMDG 737 cockpit view. Similar gain in an external view 70 to 74. Not much, but every frame counts.

@2020fsers 5 ай бұрын

Thanks for the post. 10% gain is a good thing . It should also be smoother . Glad it helped

@flywithme2211 5 ай бұрын

Thanks for the videos ! I have one question , when the next version of nvidia driver will be released , how i will install it ? should i do the same steps , like unistalling the old version in safe mode ,and then dowalowding the new version.

@2020fsers 5 ай бұрын

Your welcome ... thanks for the comment .. yes repeat the process on future updates .

@flywithme2211 5 ай бұрын

@@2020fsers Thnks !

@salmopr Ай бұрын

Hi there Sir, we have to do this every time we get a new GPU update, right? Yes Sr I just did it again, now let's get into the control panel and set it up, which I have to look for one of your recommendations , thank you

@2020fsers Ай бұрын

Hello yes on every update . Screen shot your settings so you have reference

@fabriziocrivelli4838 5 ай бұрын

Hi Jon, thank's for your great job. I've a question. Without gforce experience I've no more the possibility to apply invidia filters. Is there a way to make them work again?

@2020fsers 5 ай бұрын

No GeForce tools can be used like filters or shaders. What I have done is adjust the color settings in the nvidia panel . I talked about this in my nvidia Panel video link is in the description.

@fabriziocrivelli4838 5 ай бұрын

@@2020fsers ok. thank you!

@eracer1111 5 ай бұрын

I use reshade (reshade.me) Very granular control over a ton of filters. I did find one of the filters crashed my sim, but removing that filter resolved the problem, and I haven't had any issues using it since.

@michaelfazakas2355 5 ай бұрын

Thanks

@2020fsers 5 ай бұрын

Thank you Michael 😊 🙏 i hope the video helps you..

@martialblaizot8558 4 ай бұрын

Hi thanks for a great video! I already have only 2 Nvdia containers and I am wondering then if I should go ahaed with this?

@2020fsers 4 ай бұрын

I wouldn't it won't gain you anything. On the next update try it tho at least use the ddu . That in itself has solved lots of issues.

@superedilaviation7835 5 ай бұрын

I would like to know what is the best configuration in the nvidia control panel if you use Frame generation mod for the RTX 3000 series for MSFS

@2020fsers 5 ай бұрын

I really don't know I don't use the frame gen mod . I did make a video on the panel settings In the description

@dixonmak 5 ай бұрын

Great instruction. Thank you. Is there a method to save my settings in the Nvidia Control Panel before I do a clean install, then reapply the saved settings to the new driver?

@2020fsers 5 ай бұрын

I don't believe there is any way to do that. Other than taking some screenshots of your settings. And then going back in and resetting everything. Thanks for the comment hope it works for ya

@Buddy308 5 ай бұрын

@@2020fsers I thought I'd read somewhere that there is a way to do this in DDU. No?

@2020fsers 5 ай бұрын

I'm not sure . I did see a setting box in the opening menu to nvclean install for new users that I said I don't touch I was reading those and I saw 1 to use your current setting in the Panel . Idk if it works of not .

@dixonmak 5 ай бұрын

@@2020fsers Will do. Cheers!

@apmarian 5 ай бұрын

Is debloating the GPU will help even if my computer is limited by the main thread? Great video!

@2020fsers 5 ай бұрын

It will because all of those processes eat up your CPU power to run those in the background. Thanks for the comment

@Syntax152 3 ай бұрын

It didnt helped me by one bit in my case. Running rtx4060 with ryzen 5600

@Dexadrinne 5 ай бұрын

I think you may have forgotten an option in DDU. In options/Advanced options Prevent downloads of drivers from windows update. If not ticked windows is going to download Nvidia drivers.

@2020fsers 5 ай бұрын

not if you turn off your internet like i went over in the video.

@maxam66 5 ай бұрын

Awesome vid, thanks! After following the new video, the Nvidia Control Panel (Program Settings) does not load, just 3 dots continually. Does anyone else have this issue?

@2020fsers 5 ай бұрын

2 things did you install the driver in normal mode and not safe mode? And 2 did you happend to check the box in the nvclean install that says will break nvidia panel? Either of these will cause this issue

@barneywalker6062 4 ай бұрын

Hi ignore the haters for starters you clearly say performance may very Being honest I don’t want to do all of this, but could I use that DDU uninstalled just to remove old driver files? As I may gain a little from that?

@2020fsers 4 ай бұрын

Yes you can use the ddu uninstaller anytime you want to uninstall a driver graphics driver that has been proven to help a lot of issues in the past

@maurots4190 5 ай бұрын

After this process when launch the sim... Should be have the Geforce Experiencia Panel? or no?

@2020fsers 5 ай бұрын

no geforce .. Nvidia control panel yes

@Munky332 5 ай бұрын

better way to boot into safe mode: Windows + R (or even just type below in search bar:) type msconfig and hit enter boot tab -> check safe boot reboot make sure to revert this once you boot into safe mode, otherwise you'll be stuck in safe mode every boot.

@2020fsers 5 ай бұрын

yes that is another way i didn't want to take people into the msconfig and get curious and start messing with things

@CaseyRybackCaseyRyback59 5 ай бұрын

Thanks, realy like it. Im running a RTX3060 12Gb, I7 9700K and 32Gb RAM. Do you have some good adwise for the Sim- Settings with this Mod ?

@2020fsers 5 ай бұрын

Thanks for the comment ... sim settings will vary on your system .. i did a video on setting I'll find it.

@2020fsers 5 ай бұрын

kzfaq.info/get/bejne/precl7uLssDVnXU.html

@bro977 5 ай бұрын

Is this safe to do with the pimax crystal and will this help with vr performance?

@2020fsers 5 ай бұрын

Yep I use pimax crystal as my go to headset .. and should help any game that you play vr or monitor .

@craigsalter2537 3 ай бұрын

Hi great videos and thank you. My cpu don’t have any graphics. Only my gpu if I delete all the drivers will the computer still boot in safe mode. To reinstall drivers sorry to seem dumb

@2020fsers 3 ай бұрын

Yes it will

@imacmill 8 күн бұрын

If I only have two 'containers' open already, does that mean there's nothing for me to do here? Of note: I did a complete re-install of nVidoa drivers several days ago, telling it to purge all old stuff, and I de-selected GForce Experience installation.

@2020fsers 8 күн бұрын

Yeah then this video won't help you much . You already removed gforce

@alexsollalemos5181 5 ай бұрын

I currently have the Nvidia driver 551.23 installed (standard procedure) but proceed according to the clean installation, should I uninstall it (first and after make a clean installation) or just install it again according to the clean installation procedure? Thanks.

@2020fsers 5 ай бұрын

You should follow the exact procedure that I go over in the video if you want to debloat the driver from GeForce and all the other stuff .

@alexsollalemos5181 5 ай бұрын

@@2020fsers Is it important to do a clean uninstall every time you update?

@2020fsers 5 ай бұрын

@alexsollalemos5181 yes the ddu is very important to removing previous versions So you don't have anything conflict with the new version..

@alexsollalemos5181 5 ай бұрын

Thank you very much!@@2020fsers

@2020fsers 5 ай бұрын

Your welcome

@aeolusatamaran7967 5 ай бұрын

Hello. Hope you are ok. I followed every step meticulously. I play on VR Quest 3. My game is now shaking very dramatically. Dont want to restore to th previous settings. Do you know what adjustment I could do to correct this? Thanks

@2020fsers 5 ай бұрын

Not sure.. it's most likely the nvidia panel but I don't have a q3 and I know they have their own software . What i would do is run the original driver file and retest .

@aeolusatamaran7967 5 ай бұрын

ok. Thanks @@2020fsers

@CaptRajuseriousflightsimmer 4 күн бұрын

Hi, I wish you can help me on this, on Nvdia control panel option- desktop scaling I set aspect ratio, but when I select scaling to GPU and Apply its revert to Dispay did couple of time time, my card is RTX 4070 ti super, recently update driver, but its keep change to display. I don't know running with display will be beneficial for images If know pls let me know the solution. Many thanks

@2020fsers 4 күн бұрын

I'm not to sure I don't touch any of the scaling options

@matthewpavel1313 5 ай бұрын

The nvidia website says that my latest driver is the 551.23, but Islandsimpilot has made a video about the 551.46 driver. I downloaded the driver and have it on my desktop now, am I safe to install it on my laptop even tho the site doesn't show it?

@2020fsers 5 ай бұрын

The nvidia site does show it but not in the driver versions. In the search on the nvidia site type in hotfix and the first thing that comes up is that driver . I'm using 546.01 because if the stutters from the new drivers but this is nothing new nvidia does this all the time . I even talked about that in my performance hack video .

@matthewpavel1313 5 ай бұрын

@@2020fsers ok, I have installed that driver, but now my main display won't connect to the laptop

@matthewpavel1313 5 ай бұрын

I fixed it, thanks tho

@salmopr 4 ай бұрын

hey man, i just wanted to say thank you, my brighly green bushes went away ,now i have a smooth flying , 40 grounds 60 in the air , is there anything that i can help with , any contribution to the channel amigo

@2020fsers 4 ай бұрын

Thanks for the comment 👍 happy it helped .. yes if you want to contribute, click the thanks icon below or sign up for the captain's club thank you very much .

@michaelfazakas2355 5 ай бұрын

Hi with this cleanup would you keep the rbar settings as in your previous video? Great video, excited to try this.

@michaelfazakas2355 5 ай бұрын

Also have you had any experience with armory crate? There seems to be allot open in the background?

@2020fsers 5 ай бұрын

Yes still keep your rbar settings . And you will have to re adjust all of your other settings, possibly even your resolution settings in the nvidia panel.. thanks so.much for the super thanks 😊 🙏 you already do enough but thank you . 😊 armory crate I have no idea what that is . Maybe your anti-virus.

@michaelfazakas2355 5 ай бұрын

Its the AMD UI, I'm running the 7900X3D and the software runs the MB and most updates. Didn't know Nvidia bloatware was there as I custom install fresh every update. So curious as to if this does the same.@@2020fsers

@2020fsers 5 ай бұрын

Do you have GeForce installed

@2020fsers 5 ай бұрын

And how many containers did you have open in your task manager?

@AriaNL 5 ай бұрын

PSA: If you have an AMD GPU, you can completely ignore this video.

@2020fsers 5 ай бұрын

Correct as stated in the thumbnail.

@michelbolli5587 5 ай бұрын

Hi, have tried all the settings in your video. When I start msfs2020 it says that my graphic card is not the right one.... is this normal?

@2020fsers 5 ай бұрын

Sounds like you may have not downloaded the driver for your card possible .

@JuniorT05 4 ай бұрын

Note: should’ve said write down or take a picture of old control panel for readjustment 😤

@2020fsers 4 ай бұрын

Noted sorry I try to think of everything but sometimes I forget .

@CTRBvideos 5 ай бұрын

I want to use my GeForce later on, will it be possible to download GeForce after doing this process? Thanks

@2020fsers 5 ай бұрын

If you're asking, can you add it to the build After you've created it, no, you cannot. You would just run the setup file for the original nvidia driver as I discussed in the video to install all of the GeForce components. You could also use the nvclean Install application to install only portions of g force experience If you do that, you may notice some other options get checked as well. Some of the options with g force. You will need other options to go along with it. And may also say that in the information on the right hand side of the screen when you click on them.

@CTRBvideos 5 ай бұрын

@@2020fsers okay thank you. I understand

@yenitzavazquez7972 5 ай бұрын

So as we deleted geforce experience, Can I installed or do you bot recommended?

@2020fsers 5 ай бұрын

You can install the original driver with GeForce if you want to switch back.

@CaptRajuseriousflightsimmer 10 күн бұрын

Hi I have successfully installed cleaned driver, my important question when update to new driver Do i have to do same things again and again. Pls let me know bcuz its time update new drive, again many thanks.

@2020fsers 9 күн бұрын

Yes you'll follow the process every time you want to update your driver

@CaptRajuseriousflightsimmer 9 күн бұрын

Thanks, will do that.

@2020fsers 9 күн бұрын

Your welcome

@rakon8496 5 ай бұрын

I am really tired of this kind of videos and false advertising on thumbnails... Up to 30% - yeah, never happening.

@Despiser25 5 ай бұрын

It hasnt taken long for youtube to get worse than Hollyweird.

@2020fsers 5 ай бұрын

I don't false advertise at all . Don't believe me. Like I say in the video look at all the hundreds of comments on the previous video and tell them they are full of it and they didn't get a performance boost . But hey don't try it it's your call you make the decision . I can only show people the way some will stray and some will follow.

@conorscully7008 5 ай бұрын

It actually does work. But it’ll fry your GPU.

@2020fsers 5 ай бұрын

Lol fry your gpu not having GeForce ok.

@danielpena-un8vl 5 ай бұрын

have you actually tried it before talking all that shit?

@UCOKomy7qM4Pq0GWS7RL 2 ай бұрын

any best app for recording MSFS i used GeForce Experience

@2020fsers 2 ай бұрын

Yes I use obs it's free

@2020fsers 2 ай бұрын

And the sniptool for screen shots

@poolhallshark 5 ай бұрын

👍👍👍👍👍

@2020fsers 5 ай бұрын

Thanks bud .

@Judenilson 5 ай бұрын

Very good, but I don't can use v-sync Adaptative (half refresh rate) anymore.

@2020fsers 5 ай бұрын

you say you cant use vsync? in the nvidia panel ? this shouldnt affect that but i dont use the nvidia vsync i use the in sim. when i check the nvidia panel adaptive half refresh is available on my pc.

@Judenilson 5 ай бұрын

@@2020fsers I use FSR, so the simulator's v-sync doesn't work, I need nvidia's v-sync in the adaptive option with half the frequency, as my monitor is 144Hz and I wouldn't like to constantly change the frequency depending on the app I'm using. using. And with this modification, V-sync with the adaptive option stopped working, it doesn't lock halfway, it simply locks at the full frequency. But, that's ok, I lowered the monitor to 100FPS and it's running fine.

@2020fsers 5 ай бұрын

@Judenilson oh ok I don't use that mod and wasn't aware of the limitation of vsync . Thanks for letting me know and glad you gotnit working .

@chungwilson8329 5 ай бұрын

Any idea to increase AMD FPS, thanks a lot

@2020fsers 5 ай бұрын

Honestly im not sure . I have never had an amd card so I have no idea . I don't like to post anything I can't try for myself before I show it .

@tobiaswalzer37 5 ай бұрын

Wow! You are totally right! Now I can run stable 45 FPS (before stable 30) in VR all maxed out (except volumetric Clouds and ambient occlusion at high). Smooth as hell. 4090 12900k. At big airports I get 38-40 FPS. Before: 25 max. Thanks a lot! I combined your tutorial with this one: kzfaq.info/get/bejne/idl-gNyEps_Vg30.html&si=Cc2omxu9PehQoY41

@2020fsers 5 ай бұрын

Your welcome and thanks for posting your results . 👍

@sebastianr4883 5 ай бұрын

Can you use frame gen with this?

@2020fsers 5 ай бұрын

not 100% but i would say yes the frame gen mod doesnt use geforce and worst case you just run the nvidia file you download from nvidia and reinstall the full driver .

@wrongwayfeldman5393 5 ай бұрын

FPS Still drops to 10 over the large city areas, nothing I try works & I am using a 12G GPU

@2020fsers 5 ай бұрын

This video surely won't fix all of asobos problems . We can only control what we can and by removing all bloatware from the driver reducing latency and background processes that consumes lots of cpu resources.

@kevinlinden9171 5 ай бұрын

A realy good video but I followed the steps and now I have ended up with realy big lag .Not sure but I think it has somthing do with ISCL program

@2020fsers 5 ай бұрын

Turn off the islc and test . I doubt that is it but possible I guess

@Multicam2 4 ай бұрын

Didn't work for me. Serious issues with Pimax Crystal after following this step by step multiple times. Device reboots every x seconds. Rolling back to NVIDIA express installation solved out.

@2020fsers 4 ай бұрын

That's strange I use a pimax crystal and have no issues .

@Multicam2 4 ай бұрын

⁠@@2020fsersThere’s also some good news. Cleaning up the previous drivers version files and following your NVIDIA panel recommended settings improved performance significantly on VR and PC

@CaptainMUAL 5 ай бұрын

Why did you install 546.01 instead of 551.23?

@2020fsers 5 ай бұрын

I've been testing back and forth to see if there is a difference. For me it seems 546.01 is smoother than the new driver . But that's for me it may not be for everyone .

@CaptainMUAL 5 ай бұрын

@@2020fsers Could you please try Siamflight VTBD if stutter or not I had before touch down

@2020fsers 5 ай бұрын

Im sorry I don't understand what you are asking .

@CaptainMUAL 5 ай бұрын

@@2020fsers I would like you to land at VTBD

@thatcountrydad6304 5 ай бұрын

Followed the steps 100%. No control panel was installed despite leaving the box unchecked. I'll try again.

@thatcountrydad6304 5 ай бұрын

Correction - I installed the driver in Safe Mode. You never stated that you should come out of Safe Mode to install the driver. Thanks!

@2020fsers 5 ай бұрын

When the ddu restarts your pc it should start in normal mode. I say this at 14:10 .

@thatcountrydad6304 5 ай бұрын

Yep it does. I just didn't know whether to go back into safe mode to install new drivers. Which I did at first, which presented the no control panel situation. Once I installed the new driver on a normal restart it worked! @@2020fsers

@2020fsers 5 ай бұрын

@thatcountrydad6304 awesome 👌 glad you got it working 💪

@manavparekh7147 5 ай бұрын

When I try to open DDU It shows the file cannot be accessed by the system

@2020fsers 5 ай бұрын

Did you use the portable version? If so try the install method

@mikesmith4926 5 ай бұрын

for some reason when I do this my Pimax Crystal disconnects every 30 seconds or so. Any suggestions?

@2020fsers 5 ай бұрын

I have been doing this for a couple years and haven't had an issue. Maybe you need to reset you power settings so your USB doesn't go to sleep . Change power profile in windows to ultimate or performance

@matness8879 5 ай бұрын

I had the exact same thing with my crystal when trying this. Also changing the power plan didn't solve it. Any suggestions?

@2020fsers 5 ай бұрын

That's what I use is a crystal and no issues . The only thing you could try is to load the original driver and check again with that to make sure that's what it is.. You may want to go into the advanced settings of the power plan and make sure that your uSB Power saving is disabled, so it doesn't shut off the USB.

@matness8879 5 ай бұрын

@@2020fsers Thank you for your reply. Yes after my crystal kept reconnecting after 30 seconds or so I installed the driver with default settings and that fixxed the issue. I will try again tonight :)

@2020fsers 5 ай бұрын

@matness8879 ok here is an alternate way of doing this . If you still have this problem when you try it again , then try this method run the d d u application. Then Click on the nvidia file that you downloaded from nvidia Select custom install once the screen pops up in the custom install menu unselect ge force. Everything else will be installed with the driver except for GeForce. So this method won't eliminate every bit of bloatware, but it'll get rid of the main portion of bloatware being GeForce

@user-zk8ox2ed9j 4 ай бұрын

What do you know about this approach? MSFS Frame Gen Mod For ALL RTX NVIDIA GPUs

@2020fsers 4 ай бұрын

I feel the frame Gen. Mod introduces too many issues with glitches screen tearing and menu glitches. I always urge everyone to try things. But for me. I feel that this is gonna cause more problems for some than benefit. That's why I haven't done a video on it..

@user-zk8ox2ed9j 4 ай бұрын

Good enough for me, thanks!

@2020fsers 4 ай бұрын

Your welcome .

@Despiser25 5 ай бұрын

I hate Microsoft more than Ive ever hated anything in my life.

@2020fsers 5 ай бұрын

This one is on nvidia

@Syntax152 3 ай бұрын

Just a quick note, followed your every other fps releated video to the word but i dont think theese tricks help with when youre cpu bottlenecked. Msfs is really hard on cpu and badly optimized for it, if the in game fps metrics it says "limited by main thread" you will probably get no gains at all from all tge tricks/hacks videos on youtube.

@2020fsers 3 ай бұрын

It's really a toss up I've had people with low end cpu get a great boost from this. But everyone system is different and software that is running so that's why I always suggest people to try things and not listen to 1 person .

@johno9287 5 ай бұрын

AMD doesn’t need tweaking videos. 😅

@2020fsers 5 ай бұрын

True

@Detlefstrippe 3 ай бұрын

CTD every time

@2020fsers 3 ай бұрын

what I would do is revert back to the original driver then and see if you still get a crash.

@micgrech 5 ай бұрын

Old news...nothing new here!

@2020fsers 5 ай бұрын

Correct updated from the original video with the new settings

@johny5400 5 ай бұрын

tried this time ago, not worthy

@macmusica 5 ай бұрын

I already have only 2 NVIDIA CONTAINERS as I never install EXPERIENCE.

@2020fsers 5 ай бұрын

Then no need to worry .

@mikesalarms 5 ай бұрын

Not needed...just do a clean Nvidia install without geforce experience option..click bait

@2020fsers 5 ай бұрын

you can do that also but it doesnt remove everything . i recommend that method when the nvclean install doesnt work for them

@macmusica 5 ай бұрын

@@2020fsers he means do not install EXPERIENCE to even begin with doh.

@Neelfy01 5 ай бұрын

Hey Jon. Just a quick heads up to let you know noticed in last couple of videos your audio is a bit low. Could maybe do with being boosted by a couple of DB's 🤏👍

@2020fsers 5 ай бұрын

Ok yeah I knew the 530 was low but this one sounds ok on my phone ill boost it a little more in the future

@2020fsers 5 ай бұрын

Do you think this video sounds low also?

@Neelfy01 5 ай бұрын

@@2020fsers Yeah it is pretty low

@2020fsers 5 ай бұрын

Ok thank you . 😊