MTM 50’ Pressure Washer Hose Reel Unboxing & Review

Рет қаралды 30,161

3 жыл бұрын

#autodetailing #pressurewashing #carcare
In this video we will be taking a look at the MTM Hydro VELOCI 50’ pressure washer hose reel, I will be doing a quick unboxing and going over the features and the installation process. This reel is a great addition to your pressure washer solution as it delivers in looks and performance!! Hope this video helps you out and thanks for watching!!
For CARZILLA use code: DP18 at checkout for a 5% discount
50’ MTM Hose Reel
carzilla.ca/products/mtm-hydr...
4’ MTM KobraJet Whip line hose
carzilla.ca/products/mtm-hydr...
MTM 3/8 QC
carzilla.ca/products/mtm-hydr...
carzilla.ca/products/mtm-hydr...
MTM HYDRO Pro Kit
carzilla.ca/products/premium-...
Disclaimer: the links in the description are affiliated and the channel makes a small commission when these links are used for purchases at no additional cost to the viewer. Thank you for the support as it gives the channel the opportunity to grow and make more video content!

Пікірлер: 75

@RICARD01 Жыл бұрын

CARZILLA IS AMAZING. I ordered this reel kit and got it from Alberta to Virginia in 6 days. BOOM!

@ddautodetailing 3 жыл бұрын

Thanks for sharing 👍! Hose reels make things so much easier. This looks like a great one.

@DetailProjects 3 жыл бұрын

I agree 💯 I’m happy I came across this option without breaking the bank!

@stevel3881 2 жыл бұрын

Great video. I'm glad I stumbled upon this. I struggled with finding the best way to connect the hose today. I used a 90, but wasn't happy with it. I'll be redoing it like this tomorrow.

@ArthurMSoto 5 ай бұрын

I was sold on thinking it would make things easier it only creates a problem… I’m doing the same tomorrow

@cynthiaenglish2736 2 жыл бұрын

I believe MTM / Veloci make great products and I don’t believe you can go wrong with any Italian made detailing products for car washing.

@jpwong0 2 жыл бұрын

Thanks for the video! I am on the same boat of thinking of getting the reel (fellow Canadian here, and also a big fan of Carzilla), and your video is easily the best unboxing of this mtm hose reel. Please keep us posted how it goes with mounting the reel! Right now I am thinking of mounting 2 screws to a stud and then 2 with a toggle anchor on drywall, just to keep the install simple and low cost.

@DetailProjects 2 жыл бұрын

Thanks for watching! I am actually finishing up an in Depth video this week on my completed pressure washer setup.Having said that I highly recommended mounting the reel to a stud for sure , I got lucky and was able to install all 4 bolts to studs and it works awesome! If you are going to install the reel on your drywall I suggest you get some pretty heavy duty anchors because when you are using the pressure washer hose and reel there is a lot of pressure built up, but I have to say I am really happy with the setup!

@jpwong0 2 жыл бұрын

@@DetailProjects thanks, I ordered the same reel, have it setup, and finally used it today! I am super happy. It is painful to manage the 50’ hose without a reel being in a tight space. I ended up mounting it the same way as I described. I also have a very tight area so this reel is just perfect. Thanks for your video; the hose orientation setup is super helpful! Mind I ask how did you take out the bend restrictor from the 50’ hose? Did you cut it off, or you have a better way? I basically cramped the bent restrictor into the reel but it feels very tight. I am also thinking of taking off the bent restrictor on the sprayer end though not sure if that’s a good idea. Cheers man keep up the good work with your videos.

@DetailProjects 2 жыл бұрын

I just moved the bend restrictor down, I thought about cutting it off as well but it works this way for now!

@jpwong0 2 жыл бұрын

@@DetailProjects thanks for getting back to me! That's a great idea. Let me give that a shot (moving it down).

@jesuslopez5494 Жыл бұрын

The hose on the the reel did you put the swivel part on the reel or on the side where the gun connects

@TheVANITYKILLJOY Жыл бұрын

Could I use this with a flexzilla 1/4 pressure washer hose?

@pejay6287 2 жыл бұрын

Just a fyi harbor freights 39$ 30ft. air reel is the same and can be adapted for pressure washer use aswell. No leaks either

@danielborquez9788 2 жыл бұрын

Hello Pejay, good info. Did the brass swivel fitting that comes on the air reel holds 1500 psi? (1200 psi tops it's what I'm running) ¿or you change that one from the reel?

@danielborquez9788 2 жыл бұрын

1800 psi 1800 is what I'm running...

@pejay6287 2 жыл бұрын

Yes sir. 1800 psi as well and still going strong.

@danielborquez9788 2 жыл бұрын

@@pejay6287 worked just fine!!, It is exactly the same reel only w/ a 1/4 NPT port instead the Veloci 3/8 Thank you Pejay.

@chefjamesmacinnis 2 жыл бұрын

We don't have harbor freight in Canada

@alandichoso7402 2 жыл бұрын

Hi @DetailProjects, I had a question about your kobrajet hose. On the side that connects to the reel, did you remove the black sleeve or did your kobrajet not come with one on that side? if you did remove it, is there an easy way or did you just cut if off? Also, carzilla is out of stock of the reel at the moment but this other website recommends using a 90 degree elbow on the reel side to connect your kobrajet. it looks like you don't need it tho for a 50' reel (which i am trying to get.) any thoughts? Thanks in advance!

@DetailProjects 2 жыл бұрын

@Alan Dichoso my kobrajet also came with the black sleeve so what I ended up doing was simply pull the sleeve down a bit so it lets the hose flex more on the connection with the reel. No need to cut it off. As for the reel you don’t need a 90 degree elbow. It will work without one , I believe the reason why they recommend this is to make the hose fit easily on the reel. I have no issues whatsoever so far without one. I would suggest to contact CARZILLA and ask them when they will be expecting a new shipment because they have been out of stock now for a while. Most likely because of the global supply chain situation. Hope everything works out for you!

@lunahouseexterior 2 жыл бұрын

Hello , great video... i ordered one that is rated 50 meters (165ft)... how does yours holding up coušle months into job? not to wobbly after ectended use?

@DetailProjects 2 жыл бұрын

So far it’s been solid, no leaks, no wobbles.

@samuelsilva7327 2 жыл бұрын

Hi .... Thanks for the video, was very helpful 👍. Have you got the link where to get them ?

@DetailProjects 2 жыл бұрын

Thanks for watching, I got everything from CARZILLA.ca, I also have all the links in the description box.

@felipe_silve 6 ай бұрын

How do you mount the reel to the wall when a drill can't fit between the barrel and the mount to drive the lag bolts in? Is there a better way other than using a small wrench?

@DetailProjects 6 ай бұрын

A Small wrench and lots of patience was the only way for me!

@AG4runner 2 жыл бұрын

Can this be mounted on table top/bench or does it have to be mounted on the wall to function

@DetailProjects 2 жыл бұрын

I can’t see why not.

@philblouin7864 Жыл бұрын

I have the MTM hydro premium kit pro and the quick connect seems to be stick in the hose. Do you have any tips to remove it to install to the reel?

@DetailProjects Жыл бұрын

I used a deep socket over the quick connect to hold in place and then I used a wrench to loosen it. It is quite the workout but eventually it will come loose

@spree4315 3 күн бұрын

I’m having the same issue with this exact setup. Having a tough time removing this QC installed by veloci and seems adding more adapters will simply not fit on the reel ..any other tips for removing it? Thank you

@hfjeff2736 Жыл бұрын

Anyone know if the mounting pipe that feeds water to the hose reel is stainless or standard steel? Or had issues with rust inside if not used for a period of time? I have not been able to find details on this.

@DetailProjects Жыл бұрын

The inside is normal steel I believe and yes I have had some minor rust issues over the course of 2 years now. Not sure where the rust is coming from however every time I prime my hose there is evidence of rust coming out the hose for a quick second and after that it goes clear. I suspect the rust it’s from the inside of the reel since every other connection i have is stainless steel.

@hfjeff2736 Жыл бұрын

@@DetailProjects Thanks for this info/update. I see there are other brands where a short whip actually routes through the mounting pipe and won't rust and can be replaced if needed. Otherwise it appears to be a great reel for the money, but based on this I am going to look at something else. Thanks again for the unboxing review.

@jjjjjjjjjjjhjjjjjhjj 2 жыл бұрын

If I already have the 50ft kj hose with quick connects on each end how do I put it together ? I am very confused how to get it to actually roll up onto the reel like that and connect everything

@DetailProjects 2 жыл бұрын

You need to remove the QC from the swivelling end of your KobraJet hose and thread it on the reel

@jjjjjjjjjjjhjjjjjhjj 2 жыл бұрын

@@DetailProjects so you can’t get a quick connect for the reel that will attach to this hose ?

@DetailProjects 2 жыл бұрын

I also tried that and it will not work because the QC is too long on the reel and you won’t be able to bend the hose into the reel, also you will not be able to reel the hose in as it will hit again the wall

@jjjjjjjjjjjhjjjjjhjj 2 жыл бұрын

@@DetailProjects how do I remove the quick connect ? Only on one side ? This is difficult

@jjjjjjjjjjjhjjjjjhjj 2 жыл бұрын

Do you have a link for these fittings or a way to show how to undo and install the fitting how tight

@gloomyxyz Жыл бұрын

Chris at Carzilla is awesome

@aarongonzalez2156 2 жыл бұрын

When connecting the pressure washing hose to the reel which end did you connect to the reel? The swiveling or non swiveling?

@DetailProjects 2 жыл бұрын

The swivelling end of the hose connects to the reel.

@aarongonzalez2156 2 жыл бұрын

@@DetailProjects which hardware did you use for mounting?

@DetailProjects 2 жыл бұрын

I used MTM stainless quick connects as both ends are male

@aarongonzalez2156 2 жыл бұрын

@@DetailProjects I meant for the nuts and bolts

@DetailProjects 2 жыл бұрын

I just went to the local hardware store and picked up some beefy anchors rated 80lbs and up

@FreeYSLM2 7 ай бұрын

Do you regret not getting the cox reel now that you've lived with the MTM reel for a few years? If the cox reel was only $100 more than the MTM, would you have gotten the cox reel over the MTM?

@DetailProjects 7 ай бұрын

No regrets, at this price point you can’t go wrong. Having said that if you are able to find a cox reel for only $100 more then definitely worth picking it up. As far as I know, the cheapest cox reel I am able to find retails for $400 CAD, so 4 times the price of an MTM.

@Lg1969 Жыл бұрын

How many of the MTM 3/8 FPT Coupler(24.0063) & MTM 3/8 QC Female Plug(24.0081) do you need to complete this unit ???

@DetailProjects Жыл бұрын

carzilla.ca/products/mtm-50ft-premium-hose-reel-kit-43-5032

@Lg1969 Жыл бұрын

@@DetailProjects Thank You, I'm in the market for one but how's the durability? The mounting bracket seems small, Can it handle the weight if mounted on the wall? I'm torn between this one and OG coxsreel a buddy has the OG one and its very well made but very heavy and that's without water... Help

@DetailProjects Жыл бұрын

Durability so far has been awesome for me, no leaks the bracket is mounted to a stud so no issues there. Overall I am very pleased with this setup and I would highly recommend it. The coxreel is without question a more heavy duty reel and better quality but also come at almost 3 times the cost. It really depends what your going for. If you want quality and price is not an issue go for a coxreel but if your not to hung up on that the mtm is a great alternative . I have a video showing my pressure washer setup, feel free to check it out to see if that will help you out!

@grantmckendry3323 Жыл бұрын

It’s a shame the hose reels don’t allows for the hose to fully release by quick release as having my hose in a fixed position always isn’t great if you need to use it for multi use.

@jtm1979 2 жыл бұрын

Will 75 feet hose fit for this?

@DetailProjects 2 жыл бұрын

Yes it will but they also sell a 100 ft hose reel if you potentially see yourself upgrading.

@jtm1979 2 жыл бұрын

@@DetailProjects yeah i know but 50ft hose would be more compact.

@DetailProjects 2 жыл бұрын

The 50’ ft hose reel will work fine with a 75 ft hose

@jtm1979 2 жыл бұрын

Thanks! And doesnt look overfilled weird? :D

@DetailProjects 2 жыл бұрын

It may but if you reel the hose neatly it will look flush. With My 50 ft hose looks like there is still more room

@bennibennone1947 3 ай бұрын

Hello! The 3/8 QD is female or male? Thanks

@DetailProjects 3 ай бұрын

Both ends are female QC

@jig1056 Жыл бұрын

Nice review and really nice looking product. My only question is why these things so damn expensive? $100 is not too bad but when you think about it, the electric pressure washer using only cost $89. The hose reel cost more than the unit itself. That’s crazy to me.

@LilCrazyMan9389 Жыл бұрын

People that use these have $500+ pressure washers with $300+ hose and gun set ups.

@DaiLoo888 3 жыл бұрын

I dont think you need the quick connect from your hose reel to the short hose, what you only need is quick connect from the hose to the pressure washer, because your hose reel and the short hose will stick to the wall

@DetailProjects 3 жыл бұрын

It does need something because both ends are male so I took MTM’s suggestion and added QC to both ends, in my opinion it works 👍

@DaiLoo888 3 жыл бұрын

@@DetailProjects where you buy your short hose? Is it custom hose? Mine is female 3/8 so it can connect diretly to the hose reel, the other end is male 3/8 so i can put QC to connect to the hose reel, bècause QC can worn by time, and it has rubber seal inside, and you will not gonna plug and unplug the hose reel everytime correct, and minimize the leak

@DetailProjects 3 жыл бұрын

The hose I got was from MTM as well it’s the KobraJet 4’ whip line

@DaiLoo888 3 жыл бұрын

@@DetailProjects ahh i c but it is really nice project, but i can see you are using karcher 1700, did you compare it to AR blue? It is a good pressure washer

@DetailProjects 3 жыл бұрын

At $130 CAD it was so hard to pass on the Karcher I had to buy it even though I didn’t need it lol, I haven’t played with the AR Blue as yet but from a couple videos I saw it’s a beast!