Lee load all 2, how to setup a new machine

No video

Lee load all 2, how to setup a new machine

Рет қаралды 22,756

Күн бұрын

Video requested by a subscriber:
In this video, I go through how to setup a new machine, and what you will be dealing with for the very basic setup (what the parts in the box do and how to get it setup on the bench for loading).
After this video, you should watch the other two videos I have (how to load once fired hulls and how to change loads). They will be part of the playlist this video is on.

Пікірлер: 36

@pedroferrer8617 6 ай бұрын

Thank you very much for the info, i am starting to do my reloads on my shotgun shell,and again your information was on point, thank you very much, sir,

@murphyfirearmstraining3630 6 ай бұрын

Glad to have helped. Happy loading

@sherlock1895 7 ай бұрын

Well done. Thank you. Cheers!

@brutalbob3982 Жыл бұрын

Mr. Murphy, I have a number of MEC Loaders on my shotgun bench, yet I find myself turning to the Lee Loadall quite often. It was my first loader and I will never remove them from my bench, so simple they are.

@davemuli2711 9 ай бұрын

Thank you! This video and others you have, have been really helpful. Thank you again 🇨🇦

@murphyfirearmstraining3630 9 ай бұрын

I appreciate the kind words and I am really glad they are helpful.

@williamarmstrong392 5 ай бұрын

That was a great how to video . Thanks !

@neillandscape1376 Ай бұрын

Awesome ! Thanks!

@drewfoxworthy1057 Жыл бұрын

A timely video for me!

@Rip-nl3rm Жыл бұрын

Thank you

@amirbadiei1784 Жыл бұрын

Thank you Sir

@SilntObsvr Жыл бұрын

I just saw another video comparing the MEC 600 Jr. to the Load All II -- looks to me like all I'd get for the extra $500 (plus more for charge bars and bushings if I want a load the ones with the press don't support) is the ability to easily change powder and shot bottles by inverting the top section. It looks to me like I can do the same with this Load All II by unclipping the lever from the top unit, lifting it off the press column, and then holding the lid on the powder while I empty the shot or vice versa. Am I correct in seeing it this way? Looks like it'll take two minutes, as opposed to one for the MEC; the only real disadvantage for this much less costly option is I can't keep preloaded bottles on hand with different shot and powders (which is, IMO, of very limited utility if I shoot the same load most of the time, and could be overcome by buying a spare top unit, available from Lee). Am I understanding this correctly?

@murphyfirearmstraining3630 Жыл бұрын

I agree with everything you said here. Only holding the lid over one while you empty the other is tougher than you would think. I actually use my hand but do exactly as you describe.

@SilntObsvr Жыл бұрын

@@murphyfirearmstraining3630 yep, found that video. I bet I could 3D print a cover for the powder hopper.

@BryanPAllen 7 ай бұрын

@@SilntObsvrgreat idea 💡

@BryanPAllen 7 ай бұрын

Thanks for your comment. I’m considering the Lee myself and learning from Chris.

@jamesyarbrough4777 11 ай бұрын

thanks for the video bud!

@abrampl Жыл бұрын

You can try to do 1mm shorter last station, it will produce little bit better crimp. To be honest, that LEE needs small update. I wil try made video how to fix it ;) Bad thing is that updated parts I got from Ukraine ... now it is not possible, but maybe some 3D print?

@pareloader5989 Жыл бұрын

Nice video brother! I did a video on my KZfaq channel, ( PA Reloader ) . About the LEE load all. The lee press is a great reloading machine.

@ebrahimjahangiri3828 9 ай бұрын

thank you for video, question that i am reloading 2 3/4 shell 12 G what bushing i should use it for poder and shot thanks.

@murphyfirearmstraining3630 9 ай бұрын

You need a recipe from a loading manual. I have a video on loads for this machine where I share a spreadsheet with different bushings for different levels of powder. You still have to have a verified load from a manual, bit then that spreadsheet will let you know what bushings to use to get to the load you need.

@ebrahimjahangiri3828 8 ай бұрын

@@murphyfirearmstraining3630 thank you

@RustyShacklefardd 11 ай бұрын

Do you know of any good shell reloading data books?I have the 5th edition Lyman book, but it's pretty vague outside of a few brands.

@murphyfirearmstraining3630 11 ай бұрын

Advantages manual from ballistic products incorporated (bpi). More data than any shotshell manual I have seen.

@RANDY12764 6 ай бұрын

What’s the amount of powder for 1200fps?

@murphyfirearmstraining3630 6 ай бұрын

Depends on what powder, what hull, and what wad. You would need to consult a good reloading manual.

@stephencockman5008 3 ай бұрын

does the load all able to load 410

@murphyfirearmstraining3630 3 ай бұрын

No. 12, 16, and 20 gauge only. Each of those requires a conversion kit and those are the only three kits they make.

@stephencockman5008 3 ай бұрын

okay cheers

@jasonlovi8745 2 ай бұрын

Mine came assembled

@murphyfirearmstraining3630 2 ай бұрын

Interesting, wonder why they changed?

@jasonlovi8745 2 ай бұрын

@@murphyfirearmstraining3630 there’s videos on KZfaq that are 10 years old with people unboxing them pre assembled, so I don’t know.

@MsRandomfunnystuff Жыл бұрын

Can you do 3.5in?

@murphyfirearmstraining3630 Жыл бұрын

No sir, 2 and 3/4 and 3 inch only.

@danwilkening888 Жыл бұрын

Can you do 2.5"?

@murphyfirearmstraining3630 Жыл бұрын

The first 2 stations would work. The center station would work except for the little fingers that help the wad enter the used hull, you would have to drill a new hole in the center column to move those further down. The final 2 stations (pre-crimp and crimp) would not work. The shell would be too short for the end to reach all the way to the crimping star.