My 1965 Mustang Gets A Huge Clutch Upgrade!
Рет қаралды 26,327
Жыл бұрынHelp support this channel by becoming a member: / @fourspeedfilms
In this video, my 1965 Mustang gets some significant modifications with the help of Holley, Centerforce, and Aldan American. We install a Lakewood Bell housing, a Centerforce dual friction clutch assembly, and a steel flywheel. Watch as we tackle every challenge head-on, with expert guidance from my friend and car guru, Gary Nelson, at Aldan American. I hope this "how-to" install was helpful! Huge shout out to everyone involved in the project. My Mustang is now safer and more capable than ever. Hit that like button, share the excitement, and subscribe for more Mustang madness!
Check out Holley's Lakewood Bellhousings: www.holley.com/brands/lakewoo...
Check out Centerforce's clutches: www.centerforce.com/
Check out Aldan American for some shock upgrades: aldanamerican.com/
Thanks to Aaron Kahan for helping film!
Get my shirts here and use the code "FOURSPEED" (Buy two, get one free)
www.amfilmfest.com/marketplac...
Follow me on Instagram: / benkahan
#fourspeedfilms #1965mustang #Holley #Centerforce #AldanAmerican #ClassicCars #Clutch #HowTo #Installation #v8 #fourspeed
@FourSpeedFilms Жыл бұрын
Help support this channel by becoming a member: kzfaq.info/love/_awmz_4zr5pBGecWFBapzQjoin
@AndyKruseChannel Жыл бұрын
Building relationships with other car enthusiasts is one of the best parts about this hobby. And on that plus side you were able to have a friend help with your new install. Very cool!!
@FourSpeedFilms Жыл бұрын
Couldn't agree more!
@jeffalessi Жыл бұрын
Ben, Making Great Content Is Second Only To Beating On The Mustang! Have A Most Awesome Afternoon!
@FourSpeedFilms Жыл бұрын
Thanks!
@johnnybaby4036 Жыл бұрын
There’s a 68 green Chevelle on your shorts. Can you connect me with the owner, I would love to buy it! Looking for a green one it’s sentimental
@Meditech509 Жыл бұрын
I have that exact clutch in my 68 with a 428 shoved in her. Alleviated all of the clutch linkage issues by going to a hydraulic clutch. Absolutely love it.
@FourSpeedFilms Жыл бұрын
Nice and thanks!
@francis8062 6 ай бұрын
The best and wonderful Mustang on YT! Greets from Italy! 😁🇮🇹🏁
@clampdowncompetition129 Жыл бұрын
Nice job Ben! So cool you can include your dad as the memories will last a lifetime and I guarantee he's loving every minute of it!
@dannyjudge2876 Жыл бұрын
Great to see a spacer plate that covers the front of the bell housing. I rock or something flying up in there could definitely blow the clutch up. My 66 is missing the plate all together
@FourSpeedFilms Жыл бұрын
I was worried about that haha
@renaissancedad9190 Жыл бұрын
DOPE! Been a minute since I seen any updates on your mustang. Salute
@FourSpeedFilms Жыл бұрын
More to come!
@1961muskrat Жыл бұрын
Gary is a friend indeed , cool Cop giving a shout out. You should film your Dad and his rods
@FourSpeedFilms Жыл бұрын
Yes🙌
@32road Жыл бұрын
Kudos to Gary for the shop time and helping a guy out, that was awesome of him! And your dad pitching in too, mighty fine. Your a good dude Ben, glad to see some good karma come your way. Thanks for another great video! Love the ‘stang✌️
@FourSpeedFilms Жыл бұрын
Thanks! They are great
@toddclark332 Жыл бұрын
❤ all the right choices to make it bulletproof
@FourSpeedFilms Жыл бұрын
Thanks!
@denniswashburn9662 Жыл бұрын
I HAVE THAT SAME CENTERFORCE CLUTCH SET UP AND LOVE IT!
@FourSpeedFilms Жыл бұрын
Awesome Dennis
@murdoc6501 Жыл бұрын
Great stuff here! Go Ben and Four Speed, keep moving forward!
@FourSpeedFilms Жыл бұрын
Thanks! Will do!
@BREW2LFOXBODY Жыл бұрын
Awesome Clutch setup brother! Love this channel so much🔥
@FourSpeedFilms Жыл бұрын
Appreciate it!!
@1pieman Жыл бұрын
That's pretty cool not only are you getting some good sponsors you getting help and teaching from a knowledgable man and you spent some time with your Dad that's more than cool 👍👍
@FourSpeedFilms Жыл бұрын
Much appreciated!
@toddbob55 Жыл бұрын
I think i heard the name GARY mentioned 500 times LOL
@chrisecker9341 Жыл бұрын
Best muscle car content creator out there, I absolutly appreciate every video.
@FourSpeedFilms Жыл бұрын
I appreciate that!
@jeffchecchio5026 Жыл бұрын
Great video! Those guys at the shop seem very cool.
@FourSpeedFilms Жыл бұрын
Yes great guys
@paulwells4203 Жыл бұрын
Gary deserves a donut and coffee (or a steak dinner) for all that work. Started in the sunshine, worked until dark. Thats also great you get time to spend with your dad on a project like that. The quality of your videos and audio is also improving. Enjoyable to watch Ben, interesting content!
@FourSpeedFilms Жыл бұрын
Great guy!
@gmans7859 Жыл бұрын
Thank You Ben. Thank You Gary for your efforts. This vid was super fun. Thanks Dad for cleaning parts. I too don't care if no one really gonna see it, IT GETS CLEANED! Ben when it comes time, consider a Late Model Permanent Magnet Starter. I did this with my 351 Cleveland. Works good, it's smaller and saved some weight. Just did my homework and bought it from O' Reilly's.
@FourSpeedFilms Жыл бұрын
Glad you enjoyed it
@aguyinnc2865 Жыл бұрын
Reminds me of my younger days. My first car was a '65 Mustang GT, I bought in 1973 for $500. I drove it through high school, starting going to a local community college where I rebuilt the motor in it and installed a Melling camshaft. The next year I was involved in a wreck with an 18 wheeler, and totalled the car. Bought a '67 Mustang with a 6 and a three speed, rounded up the parts I needed and swapped in the 289. Wish I still owned either of those cars today. But fast forward and when I retired, I bought a restored '73 Mach 1. So we go to cruise ins and car shows. Still have that Mustang fever!
@FourSpeedFilms Жыл бұрын
Awesome
@tylerstoddard707 Жыл бұрын
Wow our cars are so similar. I have a 1965 mustang with a 347 stroker mated to a t-10 transmission. They’re in about the same condition as well 😂. Love watching these videos because I’m going through the same stuff with my car. Keep it up!
@FourSpeedFilms Жыл бұрын
awesome Tyler
@aaronweil2381 Жыл бұрын
Gotta love the clasics
@TheNightmaro79 Жыл бұрын
Aldan is a great company and Gary is the man! Thanks for the vid Ben!
@FourSpeedFilms Жыл бұрын
Yes they are!
@marcbee1234 Жыл бұрын
Gorgeous car, luv the color!
@jasonbanuelos7569 Жыл бұрын
There’s nothing like working on your classic cars, trust me my brother and I have two it’s always something. Keep up the good work
@FourSpeedFilms Жыл бұрын
Thanks! Will do!
@martymartin7637 Жыл бұрын
Great job looks good !
@FourSpeedFilms Жыл бұрын
Thank you!
@Follett2121 Жыл бұрын
Keep making videos buddy! Love the content. That mustang looks gorgeous with those old school tires! Huge fan of it
@FourSpeedFilms Жыл бұрын
Appreciate it!
@gerardoalas2370 Жыл бұрын
Yo im subscribing because im getting one here in the next couple days please keep the videos up. Specially the tutorials
@howardrodner2302 Жыл бұрын
Great video as always. You have a great friend in Gary and Aldan American!
@FourSpeedFilms Жыл бұрын
Thanks! Great people
@JDWorkshop-wn9tt Жыл бұрын
Another great episode! Thanks for sharing. That car is really evolving!
@jerrynavarro2404 Жыл бұрын
You have a nice mustang bro! Its coming a long very nice !
@FourSpeedFilms Жыл бұрын
Thanks jerry
@jerrynavarro2404 Жыл бұрын
@@FourSpeedFilms your welcome! I really want to own a first generation mustang and your channel is inspiring me to save up and look for a classic mustang!
@erincherry3870 Жыл бұрын
Also, if you ever come up to Apple Valley, I have a pretty big Ford collection to show off! Performance, Hot Rods, and Truck projects! Hit me up!
@FourSpeedFilms Жыл бұрын
Sounds awesome
@tompreciado863 Жыл бұрын
Very nice, I was hoping to see you at the Black Widow booth at the Goodguys car show. I saw Craig’s car there. Good to see you making videos bud.
@FourSpeedFilms Жыл бұрын
Thanks!
@68vette11 Жыл бұрын
What a fun video. Thank you
@FourSpeedFilms Жыл бұрын
Thanks
@bubot17 Жыл бұрын
Sweet, keep them coming 👍👍
@FourSpeedFilms Жыл бұрын
Thanks!
@ebrowntaylor1 Жыл бұрын
Remflex gaskets are incredible. I've used collector gaskets like this, and various others. The best thing is you are never supposed to have to tighten them. Great video! I hope you like the new clutch.
@FourSpeedFilms Жыл бұрын
Thanks for the info!
@AboutHorsepower Жыл бұрын
Gotta get the boys back together 🤟.
@FourSpeedFilms Жыл бұрын
Let’s do it! Would love to shoot the stang
@AboutHorsepower Жыл бұрын
@@FourSpeedFilms down!!
@RDY2SHO Жыл бұрын
Young man, you make some great and informative videos! Keep up the great work! It’s great to see our youth loving these classic cars!!! 🏁👍😎
@FourSpeedFilms Жыл бұрын
Thanks for watching!
@Ecosse57 Жыл бұрын
man, this brings back memories when i was in my early 20s and i had major corporations not only give me free parts but also actually install the parts in their garage while i watched. seems like yesterday. well, at least the interview videos are entertaining.
@FourSpeedFilms Жыл бұрын
Cool!
@robjudge181 Жыл бұрын
I learned I need a Gary!
@FourSpeedFilms Жыл бұрын
Everyone needs a Gary haha
@Whitenoise527 Жыл бұрын
getting a hurst short shifter for my mustang was the best thing ive ever gotten
@FourSpeedFilms Жыл бұрын
I’m jealous!
@Jay_x_pluto Жыл бұрын
Im a little late. But good vid as usual Ben. Hopefully someday I’ll get to meet you at a cruise or something
@FourSpeedFilms Жыл бұрын
Let’s do it
@gasratzcustoms Жыл бұрын
SUPER NICE UPGRADES!!!!!
@FourSpeedFilms Жыл бұрын
Thanks!
@stevepowell-thomas5918 Жыл бұрын
Hi Ben how are you doing new clutch nice one great video thanks 👍🚗
@FourSpeedFilms Жыл бұрын
Thanks!
@steves9905 Жыл бұрын
i have one of these scatter shields sitting on the floor waiting to go into my '70 Mach. guess i better get off my butt and get busy. looking forward to some power shifting...
@FourSpeedFilms Жыл бұрын
Awesome
@bandagefreak Жыл бұрын
Well done, Ben - your channel is really taking off now! I fitted a Hurst shifter on my '67 Fastback and wished I hadn't bothered - the original Ford 4 speed shifter was much better. As for the steering, I fitted an EZ-Steer electric system - it's a bit wild on the understeer, but an absolute breeze when it comes to parking the old beast! Keep up the great work and let's see more of your canyon buddies blasting their old V8s out there!!
@FourSpeedFilms Жыл бұрын
Thanks!
@nikolovell Жыл бұрын
If you're wondering about Borgeson power steering, I put their box in my 66' mustang and it was the most difficult install I have ever done. I love working on my car (I've swapped my trans, clutch, flywheel, rear end, front and rear suspension, and installed Sniper EFI) but I would never do another Borgeson box. Every part, including their z-bar needed to be modified, and it almost reduced me to tears😂. If you choose to go that route, buy tri-y headers.
@FourSpeedFilms Жыл бұрын
Manual box it is😂
@nickbruni8041 Жыл бұрын
Sweet 🏁🤙🏼
@FourSpeedFilms Жыл бұрын
Thanks!
@johnsheetz6639 Жыл бұрын
I like the car and I watch your videos here and there. Have you taken it to the strip yet 🤔?
@bigguy43055 Жыл бұрын
Great video! Don't forget the speedo! Lol
@FourSpeedFilms Жыл бұрын
Thanks haha
@spookerredmenace3950 Жыл бұрын
Beautiful car
@FourSpeedFilms Жыл бұрын
Thanks!
@spookerredmenace3950 Жыл бұрын
@@FourSpeedFilms anytime my dude! keep up the awesome work! very proud of ye
@Izvitoy Жыл бұрын
If we played a drinking game for how many times you said "then" in this video, I'd be going to the hospital for liver failure lmao
@user-qr7ee2cp4y Жыл бұрын
Cool car
@FourSpeedFilms Жыл бұрын
Thanks for watching!
@pauleggert1863 Жыл бұрын
Check out unisteer, I have their 1st gen manual rack and pinion setup easy to turn only issue is headers but found JBA-1650S work 👍
@FourSpeedFilms Жыл бұрын
Interesting!
@FourSpeedFilms Жыл бұрын
Get my shirts here and use the code "FOURSPEED" (Buy two, get one free) www.amfilmfest.com/marketplace?Collection=Four+Speed
@caseyedds2032 Жыл бұрын
Bro look into a “PMGR” starter.
@feminismwrong Жыл бұрын
Warped disc fingers uneven fork shaking..bearing will fail.....don't build manuals
@adamhoffman3687 Жыл бұрын
Ben get a starter for a 1993 mustang with a 5.0. There a factory mini starter. You'll have to change the wires on the solenoid but otherwise it's a bolt on deal. Good video.
@FourSpeedFilms Жыл бұрын
Cool!
@RobertSiwik1968 Жыл бұрын
You have such a cool car buddy. Do yourself a favor and look into electric power assist steering. Gary is an unbelievably awesome friend to have you're lucky dude. Also shout out to your dad. He's a great help and a great teacher love your channel. I hope to see it keep growing.
@FourSpeedFilms Жыл бұрын
Thanks! Will do!
@willdeane6858 Жыл бұрын
Great video as always, how did you work out which clutch to order? I have a falcon sprint and I’m stuck!
@arthurnelson7535 Жыл бұрын
Beaut…. Love it …. 😊
@FourSpeedFilms Жыл бұрын
Thanks!
@davevan8864 Жыл бұрын
Well done as always!!!! A few notes......... 1. You run a 66 dash.....did you change or was it like that? 2. First Gen Mustang clutch linkage is a mystery to all. So many different ways FORD did it. 3. I see model cars on the shelf behind you in the open. I started building models growing up in So Cal in the 1960's and have a collection of about 5K now and work in the biz freelance. 4, You were pretty close to my buddy of 60 years.....he's in Buena Park. Thanks!!!
@FourSpeedFilms Жыл бұрын
I put in the 66 dash!
@dustinjenkins1709 Жыл бұрын
Yes hurst makes a shifter for the t10 in your car
@FourSpeedFilms Жыл бұрын
I was checking some of the serial codes and I’m not sure…so I’m nervous to get one
@E66_h3ad Жыл бұрын
Borgeson makes a good power steering conversion kit I used it on my 66 mustang and it only took a few hours. It gets rid of the junk ford piston style power steering and adds a Chevy style box. You have to remove your steering column and trim it but that is in the instructions and a bunch of KZfaq videos cover it. I haven’t had any issues with it in well over two years. It’s a lot cheaper and easier than a mustang II rack 😂
@FourSpeedFilms Жыл бұрын
Thanks! Did you need to buy new headers?
@E66_h3ad Жыл бұрын
@@FourSpeedFilms nah my headers were fine I have a 87 5.0 block with long tubes and it was all good. The 289 should be about the same but I’d check out some videos to see there’s plenty of them. Just incase for some reason my headers arent the same as yours. But it’s basically a replacement steering box. It uses existing hardware on the manual steering and basically makes it a power box. Which is super helpful it’s a big difference. It doesn’t feel sloppy but it’s going to definitely be a lot “looser” than manual steering because of the power boost 😂. The worst part is really reinstalling the box because the headers are there but other than that it wasn’t too bad I had it done in an afternoon. But I would def do this over a factory power steering unit as those stabilizer type steering units are known for going bad constantly.
@FourSpeedFilms Жыл бұрын
Cool! Thanks for the tips!
@E66_h3ad Жыл бұрын
@@FourSpeedFilms of course! Cj pony parts has a good video on it as well as others who have bought it. I bought mine from CJs they have a store like 2 hours from me so I got relatively fast shipping. I know some mustang and Ford fans don’t like them but I haven’t had any issues with them. And they’re just a company that sells the kit I’m sure jegs or summit sells it too. Good luck with your stang can’t wait for future vids
@camerondouglas4162 Жыл бұрын
Theres gotta be a Hurst for your car. Like they used on the original GT350
@melodiesaremi9543 Жыл бұрын
Maybe I can drive it now
@FourSpeedFilms Жыл бұрын
Let’s do it
@2-old-Forthischet Жыл бұрын
My 67 had a Centerforce unit. It was the best streetable clutch I've ever had! Noooooooooooooo, keep the manual steering! You get a lot better road feel! Lots of my friends even ditch the power brakes!
@FourSpeedFilms Жыл бұрын
We shall see haha! I am keeping the manual brakes
@rodneykite8862 Жыл бұрын
I'd like to see the before and after driving difference of an aftermarket upper A-Arm with some built in positive caster. Most from the aftermarket arms have 3 degrees positive caster, stock is around zero. Of course you want power steering before you make that mod.
@FourSpeedFilms Жыл бұрын
That would be cool
@yvindandreassen6125 Жыл бұрын
Love your videos, what type of power steering are you going for? Im thinking of adding it aswell on my 67. Im leaning more towards the borgeson unit rather than a rack and pinion set-up.
@FourSpeedFilms Жыл бұрын
Probably Borgeson! I’ll probably reach out to them soon. I’ve heard they are really good
@elrayox8932 Жыл бұрын
Hard burnouts are in order 😁
@FourSpeedFilms Жыл бұрын
You got that right!
@spookerredmenace3950 Жыл бұрын
my dear car is the 1968 Ford Mustang fast back 2+2, or the Bullitt car, i may never get a version of it but i can in lego lol
@FourSpeedFilms Жыл бұрын
One day!
@johnsarian_cu Жыл бұрын
Wow, driving around L.A. and getting spotted cuz you're now famous! 😆 Great pit crew you have too. Treat 'em to a HiHo burger maybe? (I've just been told they're good, no idea.....)
@FourSpeedFilms Жыл бұрын
Thanks haha!
@anthonyconway8310 10 ай бұрын
Beautiful car but bro you should consider putting in a t5 transmission from a '80s fox body mustang get you an extra gear
@JeremyWorth-qb4py Жыл бұрын
Looks good man! What size tire setup are you running on your car?
@FourSpeedFilms Жыл бұрын
Thanks! G70 and f70
@johnmilner7603 Жыл бұрын
Those Centerforce pressure plates are a gimmick. A friend of mine with a 69 Camaro was shifting gears and the 4 speed locked up into a gear which I don’t remember which. The weights broke away and pieces were jammed in the clutch and pressure plate. Be careful at high rpm shifts, they may let go. I myself went with a Luk clutch in my 70 Z28 and don’t believe in those weights. IMO it’s BS.😂 Wow and here I thought you were doing the work yourself. 😂 Parts given to you and installed, must be nice.😮 All that work and you don’t even install a TKX 5 speed. 😂 BTW your steering wheel is not straight which would bother me.
@judgejury3230 Жыл бұрын
Psst... Ben my friend. You need to line up your steering wheel LoL. Email me. I want to ask how everything went with Steve Scott and Uncertain T. I have another question to ask, but I'll save that. Tell your dad hello, and show more of Bad News... Much love my brother.
@NGG1983 Жыл бұрын
in my experience it's best to only use a Ford Performance throwout bearing. the ones that come with clutch kits just don't last and it'll be chirping like a baby bird in no time.
@FourSpeedFilms Жыл бұрын
Hopefully I don't run into any issues, haha!
@NGG1983 Жыл бұрын
@@FourSpeedFilms I typed this at the beginning of the video like you havent already put it all together already, lol. derp. the kit bearings are certainly a problem on later model T5 transmissions, maybe with the older t10 it wont be an issue, i dunno. I hope it doesn't give you trouble too. Nice job, must feel a lot better now.
@emm5alcaz Жыл бұрын
try the KRC power steering kit from MIKE MAIER INC !
@FourSpeedFilms Жыл бұрын
That would be cool!
@emm5alcaz Жыл бұрын
@@FourSpeedFilms I'm thinking of installing on mine but not sure if it will be as smooth installing on my 302 90s engine
@melodiesaremi9543 Жыл бұрын
Hi Benny
@FourSpeedFilms Жыл бұрын
❤️
@cameron9122 Жыл бұрын
Have you put any thought into an electric power steering pump, like swapping in one from a Volvo?
@FourSpeedFilms Жыл бұрын
I haven’t thought about that!
@ignacios1562 Жыл бұрын
hey Ben, i´m restoring a cammed 66 289, i can hear your clutch pedal squeaking just like mine, any tips to getting it fixed or replaced? cheers!
@FourSpeedFilms Жыл бұрын
I was wondering the same thing😂
@jp083 Жыл бұрын
Good job! Do you know the brand of your headers? I'm looking for headers who fit with my toploader, z bar etc.... Julien a french fan 🇫🇷
@FourSpeedFilms Жыл бұрын
I think they are from summit racing. The previous owner put it on
@erincherry3870 Жыл бұрын
How do you manage to keep your camera clean working on things!? I have to use a Go-Pro because I'm too scared of getting grease on my Canon R6😅
@FourSpeedFilms Жыл бұрын
I’m the same way lol. Gary and my dad did almost everything! So I was able to capture everything
@feminismwrong Жыл бұрын
Does it have a clutch damper?????
@Flogknaw101 Жыл бұрын
Ironic! i have to change out my flywheel in my car! lol!
@FourSpeedFilms Жыл бұрын
Perfect timing
@bobh4966 Жыл бұрын
Just curious why didn't he dial indicate the new Lakewood belhousing? Ive had alignment issues on everyone I've ever installed
@FourSpeedFilms Жыл бұрын
When I did some research it looks like it isn’t that important with old transmissions. They have a higher tolerance from being misaligned. However, modern transmissions have a very small tolerance for misalignment. We also didn’t have any extra dowel pins This is where I found the info: www.holley.com/blog/post/how_to_align_your_bellhousing_for_maximum_transmission_and_clutch_life/
@bobh4966 Жыл бұрын
I run a Muncie in my nova and I had issues it is a modernized one with super case. I'm impressed it shifts perfect must be the ford luck lol
@thedelusionisreal Жыл бұрын
Gary favors Larry "Bud" Melman from the David Letterman Show.
@garycamara9955 Жыл бұрын
That looks like my old Mustang.
@FourSpeedFilms Жыл бұрын
Cool
@mikebroszczak5767 Жыл бұрын
I asked you this question many times what are the sizes of your tires example,,15× WHAT.. somebody please reply to this question.
@I_like_turtles_67 Жыл бұрын
Hit up Mike Maier Inc for the power steering kit. Maybe he can sponsor the build or cut you a deal.
@FourSpeedFilms Жыл бұрын
That would be cool!
@swooshdave Жыл бұрын
Be sure to write out your narration as it will help you catch repetitive phrases and words. I found you saying “Then this happened” and “Then that happened” a lot. The best parts were when you were telling us about why what was happening. Side note: You and Jay Leno are now the only people in LA who can get out of tickets. You’re now that famous. 😊
@FourSpeedFilms Жыл бұрын
Thanks!
@nacholibre7285 Жыл бұрын
Get Epas steering system and gear box. no fluid no power drain from engine, cleaner looking.
@theregoesmiller389 Жыл бұрын
* * WHAT SIZE ARE THOSE TIRES ? ? * *
@ericmirabal7078 Жыл бұрын
Hey Ben! I’m also building a 65, Im converting it to a 4 speed and looking for some parts. Are you interested in selling me the old bell housing?
@FourSpeedFilms Жыл бұрын
Shoot me an email at fourspeedfilms@gmail.com I need to look at how much it’s worth first. I believe it’s an original ford one. It’s pretty clean. My car was converted to manual so it’s not numbers matching to my car
@RobertSiwik1968 Жыл бұрын
You would be much better off with a newer starter from a 5.0 mustang. All it requires is a very minor change in the wiring and your car will start so much faster and easier.
@FourSpeedFilms Жыл бұрын
Thanks!
@pedrofernando176 Жыл бұрын
✌🤙
@FourSpeedFilms Жыл бұрын
Thanks!
@jamesonpace726 Жыл бұрын
Aw, parking iz haaard....
@FourSpeedFilms Жыл бұрын
Yes!
@feminismwrong Жыл бұрын
When you let out the clutch slowly you probably hear a noise like a boat motor pressure plates are made in china.....
@FourSpeedFilms Жыл бұрын
So far no issues!
@feminismwrong Жыл бұрын
I just found out that my mom gave away my dad's 1965 mustang to the salvation army..... She also gave away her house and bank accounts and disinherited my cousin.... As well as me her son......narcissism....... Oh well the mustang was only an automatic
Cool Items Official
Рет қаралды 30 МЛН
Autotopia LA
Рет қаралды 135 М.
Dyno and Dragy Channel
Рет қаралды 1,7 М.
DazeCars
Рет қаралды 36 М.
POWERNATION
Рет қаралды 1,7 МЛН
Simple Creative
Рет қаралды 7 МЛН