My 1995 Dodge Ram is getting a BUNCH OF HP!

No video

My 1995 Dodge Ram is getting a BUNCH OF HP!

Рет қаралды 18,143

Күн бұрын

We switch gears on the 1995 Ram build in a big way! This Roadkill Nights build is getting serious with only three weeks left to finish. We we make it?? Subscribe to follow along!
Social media:
Facebook: Stangkilr productions
Instagram: justinkeith_sct
Tiktok: Keithallen
Wear what we wear:
street-car-tak...
Killer Performance KC
www.killerperformancekc.com
justin@killerperformancekc.com

Пікірлер: 88

@StangkilrProductions Жыл бұрын

This truck is about to take a major transformation!

@turbob18teg Жыл бұрын

I commented on the unveiling video when you mentioned scrapping the seat, I’d like to talk to you about buying them. My dad passed away and I’m restoring his old truck. These would be the perfect addition to the restoration.

@thomasj.kappjr.929 Жыл бұрын

Nothing like a complete plug-and-play crate kit

@87mustang87 Жыл бұрын

Wish u did a standard small block like a 340 or 360 stroker. Rumor is the 1300 cc injectors tune better an better drivability then the 1440s

@Akestler Жыл бұрын

I knew it was going to be a roadkill nights build. That makes it better

@jdmcarssmoke8533 Жыл бұрын

@@thomasj.kappjr.929 facts it a plug play kit and they need to use the what every came in the box to make it work it and it not gen 3 hemi

@hidros1461 Жыл бұрын

Finally a video worth watching! Nothing better than some Mopar action!

@BoostedMotorsports Жыл бұрын

Hell yeah that’s going to be a badass unit 💪

@2809Nick Жыл бұрын

Literally building the truck I wish I could afford.

@2muchBoost_ Жыл бұрын

Marking that Supercharger belt and pulley to check for belt slippage was a great idea, I just went in the garage and did mine on the ZL1...Great content

@StangkilrProductions Жыл бұрын

Right! Why didn’t I ever thing of that haha

@logangaddy4917 Жыл бұрын

Hey Justin I swapped one of these trucks with a 5.7 a few years ago, use a volvo electric power steering pump. You can regulate the voltage and make the steering feel however sensitive you want

@scottsigmon926 Жыл бұрын

You guys definitely use the best parts you can buy.

@shanethompson7543 4 ай бұрын

Love this build!!!

@hunterbeasley4021 Жыл бұрын

I believe Holley makes a PS pump for the Gen 3 Hemi swaps into the 2nd gen trucks, if you don't go a custom route. Love the build can't wait to see the transformation!!!!

@Highlander1432 Жыл бұрын

Love these retro swaps man

@jrusted5.031 Жыл бұрын

Sick!

@jacobrecord82 Жыл бұрын

I think you should keep the flames.

@johnsmith-qz4bv Жыл бұрын

that red eye is going to look sick in that truck over the inline 6...nice work guys cant wait to see this one,,

@angelbarron2556 Жыл бұрын

Release merch of the truck builds 🔥 i see your zr1500 shirt is out of stock !!!

@korn111685 Жыл бұрын

Because you went heliphant I’m in. I was not down for the hurricane.

@joesilvasr9733 Жыл бұрын

Darn, I was really looking forward to the inline 6 😢

@lowhpgt500 Жыл бұрын

Same. I expected a hellcat swap originally, but when the in-line 6 was mentioned I was more interested.

@jnsnyder9343 Жыл бұрын

I really wanted to see the hurricane motor.😢

@jonathanjones1814 Жыл бұрын

@jnsnyder9343 I did as well 😌, me personally would have gone with a Viper V10 tired of the Hellcat swaps

@nibbzs15 Жыл бұрын

Just wait till I win the lottery! I'm getting everything I always dreamed of! 🙏

@allenrodgers1908 Жыл бұрын

Thank god! Happy for the hellcat motor in the truck!

@jonathanjones1814 Жыл бұрын

I would've gone with the Viper V10 that would have been 🔥 and more of a special build imo.

@terrymiller9788 Жыл бұрын

U should have just bought a run of the mill truck. U took a super clean truck to change everything that was still in great shape

@DirtyRamRob64 Жыл бұрын

Dudeeee i want to build something similar i have had this idea in my head for a few years now so awsome yall are building one

@angeloropeza2510 Жыл бұрын

Bad Ass 🔥

@funvic Жыл бұрын

"HELL" YEAH!!! 😂😂😂

@robertedwards8578 Жыл бұрын

Start at front to back. Do steering and suspensions first. Then Start with the engine. It looks easier to do.

@marcuslinnell6719 Жыл бұрын

Someone probly mentioned it already but those ecus are not waterproof. Mounting it with the connectors facing up is even worse for that aspect.

@patmald Жыл бұрын

FI Interchiller!!!!!! It uses the AC to chill the intercooler like in the demon.

@StangkilrProductions Жыл бұрын

Doing an ice tank

@darkSide_211 Жыл бұрын

put a griptec upper pulley on it

@shundadon1041 Жыл бұрын

Hello what did you do with the old transmission for the 5.2

@Unfinished-Business24 Жыл бұрын

I do wanna do this to my 4th gen rebel I wish I knew someone in the ny area that does the conversion I don't know what actually goes into this conversion and $$ wise

@mattharden3989 Жыл бұрын

Wait, why’d you veer away from the hurricane?

@StangkilrProductions Жыл бұрын

This build is for a competition and Dodge decides what engines we use.

@mattharden3989 Жыл бұрын

Fair enough. Was looking forward to the hurricane results as I’m thinking of putting one in my dads 94 Dodge truck. Granted, the Redeye is much much nicer.

@TX2015A.Z Жыл бұрын

Not many fast g3 hemi trucks out there this will be bad ass!

@angrymike6759 Жыл бұрын

Did you make sure you can run a Holley CPU for the event ??? it's been a problem in the past.

@josephfuntanilla8276 Жыл бұрын

What didn't used the hellephant

@340Demon Жыл бұрын

Got those steel toed Crocs on

@Blitz0065 Жыл бұрын

That RSX tho!!!!

@DAPerform Жыл бұрын

How’s your time to buy the rcsb rams before they blow up in price 😂 this’ll be a sweet build

@memtim Жыл бұрын

What is going on with the Monte Carlo I keep seeing

@ScottKirk-Notredcrew Жыл бұрын

Truck YA!

@foxtrotcharlie7294 Жыл бұрын

NASCAR Truck side exit exhaust would fit the build well.

@karmanissabella Жыл бұрын

You're ripping apart a 1 of 125 trucks ever made to make a drag truck wow!!! I'm questioning this why not just buy a low mileage short box and do this? I can't even wrap my mind around this that truck is rare and I'm not a mopar guy but holy smokes its rare. You do realize were your going is just mopar craziness lol this will be interesting love what you do but the heat you are going to take mite be ridiculous good stuff, man!! Keep up the sweet work

@StangkilrProductions Жыл бұрын

It’s a conversion truck done by an aftermarket company. It’s decals, seats and wheels lol

@karmanissabella Жыл бұрын

@StangkilrProductions I understand that does that really negate the fact that it's still 1 of 125? I'm not trying to bust your balls. I'm just curious. I'm sure way bigger idiots than me are going to lose their minds, I know how mopar guys are just saying, lol

@douchedidit9222 Жыл бұрын

U should have made a street truck ac and all it is really clean

@swoosh89 Жыл бұрын

Are you doing anything to the rear-end?

@MulletModz Жыл бұрын

I could be wrong, but I thought for roadkill nights you could only use stock computers only. Might be worth double checking on that before spending the time to get the holley setup and find out you can't use it.

@StangkilrProductions Жыл бұрын

We using Holley. They’re a partner

@MulletModz Жыл бұрын

@@StangkilrProductions Oh ok, wasn't sure how all that worked. I just remember hearing about certain restrictions in the past events. I love the build so far, and can't wait to see it completed.

@graham12v8 Жыл бұрын

Yo Justin, how much for the seats and center?

@StangkilrProductions Жыл бұрын

$200 but won’t ship

@mopardude707 Жыл бұрын

Selling the seats by chance 😅

@StangkilrProductions Жыл бұрын

I would but not shipping

@timtaylor6147 Жыл бұрын

Gotta get a Lil Red Truck And hellcat swap THAT

@timtaylor6147 Жыл бұрын

Did not watch the video before I said Lil Red Truck But what about a Lil Red Truck with a 400 Dodge stroked to 500 An use Holley EFI w an Indy intake setup for port fuel ?

@corymason5053 Жыл бұрын

How much would you say ballpark it would cost to hellcat swap a vehicle

@thatdb1onelton_bloccstyle Жыл бұрын

What's up with the white RSX??? You guys are building it??

@StangkilrProductions Жыл бұрын

Steven’s Dads car

@rockkhound943 Жыл бұрын

Sooooooo when are you going to get yo hands on a LT6 ?

@StangkilrProductions Жыл бұрын

Not sure how that bellhousing bolt pattern would look

@rockkhound943 Жыл бұрын

@@StangkilrProductions I'm curious myself .

@98wytebird Жыл бұрын

Where is steven at ?

@StangkilrProductions Жыл бұрын

Busy building OBS Chevy trucks

@collinschmidgall Жыл бұрын

I'm going to watch this build closely. I have a 95 ram wanting to hemi swap and build a drag and drive truck.

@Skiridr22 Жыл бұрын

It’s gonna be running close to Nemo’s numbers 😢

@adamreynolds1851 Жыл бұрын

Not to sound like a dick but from a water intrusion perspective, should the plugs be on the bottom of the dominator ,colum mount power steering

@StangkilrProductions Жыл бұрын

They will be fine. They’re weather tight connectors plus not sure this truck will see much water from this point on

@CTemple82 Жыл бұрын

More suitable for the truck to have a Hemi, especially being a Big Daddy Don Garlits truck!

@StangkilrProductions Жыл бұрын

Yes!!

@timtaylor6147 Жыл бұрын

Way cooler Methinks But who am I ?

@cooperaldrige Жыл бұрын

I guess I was right from the beginning 😂

@kurtiscurtis8102 Жыл бұрын

I’m glad your not doing a i line 6 I thought to my self why would he do that all the realy bad ass tru is he’s done why do 6 cylinder you guys really rock 🪨

@jonathanjones1814 Жыл бұрын

V10 would have been perfect, tired of seeing the same type builds. I 1000% predicted another Hellcat motor 🤦🏾‍♂️ either way this thing is going to be sick.

@StangkilrProductions Жыл бұрын

This build is for a competition where every team has to use the same engine.